Faceplate

1600

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Iodpfx Akjz Izu Topstn Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Itodpfxjxtmqte Akpon Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Ijdpfxs Aawyie Akpstn Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Table load: 2000 kg Iodpfx Akoyy Npnjpjtn Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special features: • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable Isdpfoi Eg Nkex Akpotn -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: excellent (used), Very heavy-duty and stable mobile welding table / straightening table from a vocational training center. Table dimensions (L x W x H): 2600 x 1600 x 920 mm Table top thickness: 50 mm Ribbing under the table top: 60 mm Weight: 1800 kg The table can, of course, also be fixed to the existing table legs. Iedpfszbithsx Akpstn Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens 840D max. workpiece dia. 1600 mm max. module 20 mm tip circle diameter 350 mm weight of the machine ca. 33500 kg dimensions of the machine ca. 10,53 x 6,38 x 4,68 m Technical details: - x-travel: 900 mm - y-travel: 300 mm - z-travel: 1000 mm - Control system: Siemens Sinumerik 840D - Workpiece diameter - max.: 1600 mm - Module - max.: 20 mm - Head circle diameter: 350 mm - Milling spindle diameter: 375 mm - Total power consumption: 80 kVa - Machine weight approx.: 33500 kg - Space requirement approx.: 10.530 x 6.375 x 4.680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min: - Tool 26 to 265 - Workpiece table 0 to 8 Itodpowzypuofx Akpen Equipment/accessories: - Motor milling head M 2 - Milling mandrels - Oil cooler - Technical documentation

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. Iodpfsbql S Hox Akpstn 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1995, Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast Iodpfxjz Tfd Do Akpstn -Manufacturer: Still, forklift mast from electric three-wheel forklift -Load capacity: 1600 kg -Dimensions: see photos / technical drawing -Transport dimensions: 2820/1180/H400 mm -Weight: 530 kg

Condition: used, total width: 440 mm, total length: 2,460 mm, total height: 1,220 mm, Year of manufacture: 2006 Colour: White Empty weight: 280 kg - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 11176 - Center height [mm]: 250 - Center distance [mm]: 1600 - Min. spindle speed [rpm]: 400 - Max. spindle speed [rpm]: 3000 - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 3.0 Itsdpfx Akszy Nb Uspen - Transport dimensions: 2460mm x 440mm x 1220mm (l x w x h) - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Isdpfethuzpox Akpstn - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Year of construction: 2010, x-axis 1.600 mm Itjdpfxoz S N Ids Akpjn y-axis 815 mm z-axis 700 mm tool taper BT 40 control Siemens Sinumerik spindle tunring speed 10.000 U/min engine 15 KW weight 11.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dividing head, 4th/5th axis - Coolant system - Chip conveyor - Handwheel - Tool changer Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: new, Working width 1600 mm Number of sanding units 2 st. Workpiece thickness max. 200 mm Itodpjz St R Nefx Akpsn

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle Itodpovtrc Ssfx Akpen maximum revolutions: 4,200 rpm continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: new, For sale: high-quality industrial Siemens SIMOTICS motor. Condition: new, unused, original packaging (warehouse stock, may show slight marks from storage). 🔧 Technical data: Manufacturer: Siemens Model: 1FE1093-6WU11-1BN2-Z Iodpfx Ajz Smigekpotn Serial number: YFJ86378498 001 Type: 3-phase motor (servo / torque motor) Voltage: 425 V Current: 43.0 A / 60.0 A Power: 16.8 kW / 21.5 kW Rated speed: 1600 rpm Max speed: 7000 rpm Max torque: 165 Nm Rated torque: 86 Nm Protection class: IP00 Insulation class: 155 (F) Duty type: S1 Cooling: water-cooled (8 l/min, max 25°C) Standard: EN 60034 Temperature sensor: KTY84-130 📏 Construction: direct drive (torque motor) high-precision manufacturing intended for industrial applications without gearbox 💡 Applications: CNC machines drive axes industrial automation production lines 📦 Included: Siemens motor original packaging