Mowing machine

Bergmann Mähraupe M 201 mit Zubehör

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Njdpfx Aksyuchrjiown Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Nwjdpfx Aeztz Hcjkisn

Condition: new, Year of construction: 2026, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) Nwodoibqr Topfx Akisn * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook * LED lamp * 230V wired power supply (for the combustion version). Other models available: XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,000 h, machine/vehicle number: 66642, Coarse material screening plant 6 m³ feed hopper with steel plate belt feeder CAT C4.4 (3054) with 75 kW Double-deck screen box: 3,660 x 1,370 mm Feed capacity: up to 300 t/h Transport weight: approx. 23,000 kg including various spare screen decks Njdpeznl Hijfx Akiown

Condition: used, mileage: 732,000 km, power: 380 kW (516.66 HP), first registration: 10/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,300 mm, Equipment: air conditioning, crane, parking heater, * Scania R490 6x4 timber truck with crane * Body: Stake body * Engine: Scania DC13 125 * Fuel: Diesel * Power: 360 kW (490 hp) * Displacement: 12,742 cm³ * Emission standard: Euro 6? Nwsdjzqiw Ropfx Akijn * Maximum speed: 90 km/h * Color: Multi-colored * Drive type: 6x4 * VIN: YS2R6X40005475333 ---- * Weights * Tare weight: 13,680 kg * Permissible total weight: 26,000 kg * Technically permissible total weight: 29,000 kg * Payload: 12,245 kg ---- * Permissible axle loads * 1st axle: 8,000 kg * 2nd axle: 9,500 kg * 3rd axle: 9,500 kg * Trailer load * Braked: 24,000 kg * Unbraked: 750 kg ---- * Tires * Front axle: 385/65 R22.5 * Rear axles: 315/80 R22.5 * Alcoa aluminum rim ---- * Body length: 6.10 m * Body width: 2.30 m ---- * Crane brand: Palfinger Epsilon M122

Condition: good (used), Equipment: bathroom, shower, Used container system, dry, watertight, in good condition. The system has already been disassembled and is ready for collection. Manufacturer: BICOBA Year of manufacture: 2009 - Consisting of 10 x 20ft containers with toilet and shower - Container area = approx. 150m² - Layout see sketch Dimensions per container: Length: 6.00m Width: 2.45m External height: 2.90m Internal height: 2.50m Nsdpfx Akjz Rmtboiown Equipment: - Plastic windows with insulated glazing and tilt/turn function - Blinds - PVC flooring (must be machine cleaned) - Water heater was connected to the building - Wall panelling - Ceiling panelling - Container lockers - Awnings on the front and side - Weather protection sheets for the roof - 3 showers - 3 sinks - 2 toilets with cabin system - 2 urinals - Documents available Insulation: Wall: 100mm Floor: 100mm Roof: 100mm - Signs of wear on the flooring Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, including the following information: name, email address, and telephone number.

Condition: used, power: 184 kW (250.17 HP), fuel type: diesel, Year of manufacture: 2017 Operating hours: 3.813 Make of engine: Cat Max. working load: 11000 kg Production country: JP Please contact Kristoff Van Havere for more information Njdpsy Uq Hqofx Akijwn - Cat 7.1 engine without Adblue - Roto version - Perfect condition

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 161 kg, input voltage: 230 V, spindle speed (max.): 3,700 rpm, spindle mount: MK 2, input frequency: 50 Hz, Twister FU-200 lathe, purchased on April 13, 2021, including roughing gouges and extensive clamping accessories. Suitable for woodturning, round parts, bowls, handles, small series production, and creative workshop projects. Key technical data: Nwedezuyt Ropfx Akisn - Machine type: Lathe / Woodturning lathe - Center height: approx. 200 mm - Turning diameter: approx. 395 mm - Distance between centers: approx. 715 mm, optionally extendable - Motor power: approx. 1.5 kW - Speed range: 2 belt stages, approx. 60–1350 rpm and 180–3750 rpm - Spindle connection: M33 x 3.5 with ASR Euro safety groove - Tailstock/spindle taper: MK2 - Includes roughing gouges and extensive clamping accessories as per inventory list - Rotatable and adjustable headstock for flexible machining - Attractive complete package for hobby woodturners, workshops, schools, and makerspaces No warranty

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, For sale: Semi-mobile crushing and screening plant consisting of: Njdpozcm I Ssfx Akiswn - Hopper - Star screen 0/60 - Binder Bivitec screen 4000/1600 - Percussion crusher 1000/500 - Magnet - Generator set 500 kVA This machine was designed and manufactured by us here in Belgium and is of very professional quality. It is completely self-sufficient and can even power other components. It is capable of separating soil into fractions of 0/20 and crushing debris into the desired size in a single operation. The complete plant has been thoroughly inspected and put in order for sale. Ready for immediate use. Price on request and negotiable. For further questions, please do not hesitate to contact us.

Condition: used, fuel type: diesel, Equipment: air conditioning, AdBlue system: Yes Year of manufacture: 2019 Operating hours: 3.193 CE mark: yes Nodpfjy U Txcsx Akiewn Please contact Kristoff Van Havere for more information = Additional options and accessories = - Ad blue = Remarks = - CAT 7.1 engine - Rotator - Perfect condition