Transfer-Unit

Müller Martini

Condition: used, Year of construction: 2007, Stream feeders Dedpfxszi Sdks Ahgekp Müller Martini 3738 Year: 2007 Description: - Stream feeders: 6 x

Condition: used, Pressure: 250 T Dkjde Du U Depfx Ahgep Length of stroke: 120 mm Down table size: 1600x1600 mm NEW HYDRAULIC AND ELECTRIC SYSTEMS

Condition: used, Year of construction: 2008, Perfect binding line Dodpfxjy R Ty Ej Ahgjkp Müller Martini Pantera (1577) Year: 2008-2000 - 1991 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 12 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 - Gauzing station - Drum cover feeder - Scoring station - Nipping and pressing station - Lay down device Max. mechanical speed: up to 4.000 cycles/h Maximum size range: 380 x 320 x 50 mm Minimum size range: 120 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Documents

Condition: excellent (used), Offer consisting of: Equipment Collating machine * Müller Martini ZTM 1571 with ASIR * 14 stations * Year of construction 2001 * 1 manual station * Outfeed gate 1572 (year of construction 2005) * 1 positioning element Perfect binder Acoro A5 * Milling and spine processing station * Hotmelt spine gluing unit with an 80-liter pre-melter * Hotmelt side gluing unit with an 18-liter pre-melter * Drum transfer feeder * Pressing station * Lay-down device * Drying section approx. 30 m Three-knife trimmer Müller Martini Merit-S * Year of construction 1998 * Infeed on the right * Pressing ram * Cutting cassettes No. 1–21 * 2 sets of knives Cross cutter CB-16 * Year of construction 1997 * Mobile base machine * Infeed belt with top belts * Turret for stack heights up to 240 mm * Pneumatic slide opening * Retractable ejector Additional equipment * Nordson PUR pre-melter (year of construction 2001) * PUR spine gluing unit * Special spine processing “Fibre Rougher” (new part) * Additional sets of knives for the three-knife trimmer Notes * Compressed air supply (6 bar), compressed air, vacuum and chip extraction required on site. * Inspection possible at any time by appointment. * Assistance with loading can be arranged. Dksdpfx Aszivbaohgop

Year of construction: 1981, condition: used, Filling machine Manufacturer: Engler Type: automatic 24 head open piston filler Model: Schume 24 Capacity: +/- 9,000 pieces per hour Filling volume: up to 800 ml Dimensions: L x W x H = 3.400 x 1.800 x 2.400 mm Dkjdpfx Asiby Rmshgop Weight: 700 kg Power supply: 380 Volt – 50 Hz – 1.1 kW Other: infeed product hopper with twin screw Tooling: 720 ml jars with TO-082 as-is or adjusted to customer needs

Condition: used, Stitching heads for Saddle Stitcher Müller Martini Typ HK 45 Year 2008 for Müller Martini Bravo - Prima Dsdpfx Aezh U Upohgekp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2025, Book stacker Müller Martini BLSD 650 (A501.1000) Year: 2025 Description: Dsdpfx Aheyr E Dkjgskp - Compensating stacker - Turning device: 90 & 180 degrees - Roller table delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 390 x 285 x 90 mm Minimum size range: 115 x 100 x 5 mm Maximum pile height: 340 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2019, condition: ready for operation (used), Length: 5650mm, width: 2960mm, height: 1850mm, with documentation, without lifting device and roller conveyer, an inspection is possible. Dedpfx Ajp R R H Iehgskp

Condition: used, Year of construction: 2001, Saddle stitcher Müller Martini Prima Amrys Year: 2001 (2018) Modernized in 2018 with a new B&R control system. Operation / Control - Digital display - Semi automatic setting Feeders - Number of chain stations: 12 - Horizontal signature feeders: 9x 370 (7x 2001, 2x 2006 - ASIR Automatic Signature Image Recognition: Asir III - Card gluer: 0423.0420 - Cover feeder: 1529.0416 - The feeder stations are without AMRYS. - Semco side thickness control - Pump(s): Air-centre Stitching unit Müller Martini Prima Amrys - Oblique sheet control - Thickness control: Semco - Stitching control - AMRYS automatic make ready system - Stitching heads: 4x HK 75 - Delivery to the left - Reject gate, for incomplete products Trimmer Müller Martini 361,0435 - AMRYS automatic make ready system - Sets of knives: 2 - Center cutting device Delivery Müller Martini Pratico 7524 Year: 1999 - Compensating stacker - Delivery to the left - The stacker is not equipped with AMRYS. Max. mechanical speed: up to 13.000 cycles/h Maximum size (uncutted): max.: 480 x 320 mm Maximum size (cutted): max.: 475 x 300 mm Minimum size (uncutted): min.: 153 x 108 mm Minimum size (cutted): min.: 148 x 105 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Dkedpfxezhucyo Ahgsp

Condition: used, Stacking tongs, box lifter, bundle clamp, gripper -Manufacturer: Müller Martini, pneumatic stacking tongs type 0277.0401 -Load load: max. 250 kg -Clamping range: 850 to 1350 mm -Quantity: 2x grippers available -Price per piece Dedjrz Szlopfx Ahgekp -Transport dimensions: 940/250/H530 mm -Town weight: 87 kg/pc.

Year of construction: 2025, condition: used, Ribbon inserter Müller Martini Ribbon A 751 Age 2025 - for inline or offline operation - State-of-the-art servo technology replaces mechanica! cams and drivetrains Dodjzgd Enspfx Ahgekp - fully automated with amrys - operation via 1 HMI operating panel - runnig left to right - can be integrated in the Diamant Commander control console - operation trom the right Equipment: - lnfeed element for the mounting of a timed belt trom left or right - Vertical infeed channel - Timing of books with light barrier - Splitting of the book block in two positions via air jet - Ribbon inserting station standard for 1 or 2 ribbons - Ribbon positioning (pull-down) device for tight insertion of the ribbon into the spine - Vertical delivery channel with delivery to the left, horizontal delivery belt - Surcharge for belt with rolling knife edge for gentle transfer of sensitive products - Ribbon separation mechanism with heated cutter - Third ribbon - Conveyor system "Ribbon Bypass" General technica! data tor Ribbon: A751.8611 Max. mech. speed 3900 Cycles/h Size range: Book Block -min. WxHxT 70* x 11 0* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. Wxl 3 x 200 mm -max. Wxl 8 x 530 mm * Size limitations see technica! data Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm3/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C be low ambient temperature) Net production output depends on paper, material, size, operator and climate conditions, etc.

Condition: good (used), Year of construction: 2001, Year: 2001 Size max 510 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3681 Description: - Chain tensioning station - 22 gathering stations - 20 gathering feeder 3681 - ASIR Automatic Signature Image - ASAC automatic self adjusting calliper - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book block feeder base with feeder - 1x 3643 Intermediate element with vibrating - Transfer into the binder Perfect binder Müller Martini Corona 3010 C15 S-31 Year: 2000 Description: - Semi automatic setting - Commander - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable Dkodpfx Aezhukwohgjp - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Base for 2nd spine glue system - PUR spine glue unit, interchangeable - Stream cover feeder - Scoring station - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 60 meters - Escape delivery Book block splitter Müller Martini 3501 Year: 2000 - Bypass belts - turn over belt Three knife trimmer Müller Martini 3672 Zenith Year: 2001 Description: - Semi automatic setting - Left hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Book stacker Müller Martini 3631 CB 16 Description: - Compensating stacker - Delivery to the left and right Condition Available immediately The machine is fully visible during operation

Condition: good (used), Year of construction: 1999, Built in 1999 Size max 510 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 12.000 c/h Dksdpfxszhtt De Ahgep Consisting of: Gathering machine Müller Martini 3691 Description: - Chain tensioning station - 24 gathering stations - 24 gathering feeder 3691 - ASAC automatic self adjusting calliper - 1 Reject gate 3614 for incomplete products - 2x 3643 Intermediate element with vibrating - Transfer into the binder Perfect binder Müller Martini Corona 3010 C15 S-31 Year: 1999 Description: - Semi automatic setting - Commander - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Base for 2nd spine glue system - Cover feeder - Scoring station - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 20 meters - Escape delivery Three knife trimmer Müller Martini 251 Year: 1999 Description: - Left hand infeed - Integrated counter stacker 289 - Knife pre-setting device - Sets of knives: 2 Book stacker Müller Martini 3631 CB 16 Description: - Compensating stacker - Delivery to the left and right