Full-container reach stacker

Linde C4540TL

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth Lajdpoqt Dmyjfx Aa Esk - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2023, operating hours: 106 h, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, power: 185 kW (251.53 HP), gearing type: automatic, fork length: 3,000 mm, color: red, Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Overall height: 370 cm CE certification: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000 KG at 120 CM SHORT WHEELBASE = 475 CM FORKS: LENGTH = 300 CM, WIDTH = 30 CM, THICKNESS = 11 CM FRONT AND REAR VIEW CAMERAS TIRE PRESSURE MONITORING CENTRALIZED LUBRICATION LED LIGHT PACKAGE CHASSIS / BODY: - Towing pin - Steps with slip protection - Rearview mirrors mounted left and right on the front fenders - Heavy-duty and protective fenders CAB: - EGO cab - Clear and hardened safety glass, thickness 6 mm - Clear windows including sliding windows in the left and right doors - Full doors with locks left and right - Complete control system on right console including light control, rotary dial for display, levers for load handling system (electrically adjustable, 2-way) - Multifunction lever on left side including horn, indicators - Braking system with pedal left and right Laedpfx Ajv Hn D Eja Eek - Cabin comfort including mirrors, handles, interior lighting, etc. - Wipers and washers for front/rear and roof window - Hydraulic steering with electrically height-adjustable steering wheel, manual fore-aft and lateral adjustment with steering knob - External reverse lights - Tiltable operator’s cabin - Step handle, left - Automatic heating and ventilation (ECH) with fresh air filter - Speed control pedal right - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, indication; engine and transmission temperature; engine oil pressure; battery voltage; clock and date; operating hour counter; service interval display; speed; engine RPM; various popup information; AdBlue display STEERING SYSTEM: - Kalmar steering axle, including double-acting steering cylinder DRIVE TRAIN: - Axletech drive axle HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic increase of engine speed when using the load handling function - Standard tilt angle 5F/10B ELECTRICAL SYSTEM: - 24 V electrical system - Rear and brake lights, LED - Working lights on front fenders, LED - 2 mast working lights - Turn signals including hazard lights, LED - Main power switch WHEELS: - Michelin 16.00x25

Condition: used, scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected Ljdpfsc R S E Sox Aa Ejak -Device is without battery brush and suction bar -Working width: 500 mm -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w Ljdjndcxgepfx Aa Esak - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: used, functionality: fully functional, machine/vehicle number: B11400839, Year of construction: 2018, operating hours: 16,500 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, construction height: 4,600 mm, power: 265 kW (360.30 HP), empty load weight: 68,620 kg, total length: 11,200 mm, drive type: Diesel, construction width: 4,150 mm, Full Container Reach Stacker VIN: B11400839 Mast Type: Telescopic Transmission: ZF5WG261 Condition: Reconditioned without warranty Technical Condition: Good Lajdevcgadjpfx Aa Eek Front Tire Type: Pneumatic Front Tire Size: 18.00-25 Front Tire Condition: 60-80% Rear Tire Type: Pneumatic Rear Tire Size: 18.00-25 Rear Tire Condition: 40-60% Sideshift, Heating, Full Cab, Air Conditioning, Movable Cab Central Lubrication Camera

Year of construction: 2002, condition: excellent (used), machine/vehicle number: SI4to, ! bargain price ! Vetter / steel bridge crane crane runway overhead crane gantry crane monorail Type P300S Length of steel construction approx. 4.2 x 2.6 m Outside edge of portal approx. 4.2x2.6m, inside edge of portal approx. 3.7x1.9m Lower edge of the bridge approx. 3.8m, hook height 3.2m max construction height (OK) of the system approx. 4.6 m Lower edge purlin / bracing approx. 3.57 / 4.2 m Ljdpfxoktkzbe Aa Esak Track HEA340, supports square tube 200x200mm Ledgers / purlins IPE240/HEA340 Steel hoist SH5025-20 4/1 BJ 2001, lifting height approx. 8m support spacing: Running track with overhang length approx. 6.5 m Payload / lifting capacity 4000 KG / 4t incl. power supply rail, control cabinet and corridor control Connection to 400V 16A Very good condition Year of construction 2004, complete crane book is available Shipping by courier, collection preferred Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: new, Offered is an attachment block broom Kehrfix in different versions from 1.50 m to 4.00 m width. A pick-up must then still be discussed separately if this is desired (e.g. pallet fork pick-up, shovel hook or Euro pick-up). An attachment block broom for forklifts, wheel loaders, tractors, mini-loaders, mini-dumpers and many other vehicles and equipment! With various attachments for quick mounting on a variety of vehicles, the KehrFix is the perfect aid for keeping larger areas clean. Laodpjh T A Tnefx Aa Esk The KehrFix push brooms are a professional choice for easy and effective sweeping and cleaning. The rugged KehrFix is designed to get the job done quickly and thoroughly in every conceivable application. KehrFix push brooms are high-quality, durable, maintenance-free and universally applicable sweeping systems.

Condition: used, machine/vehicle number: 14547, Year of construction: 2010, operating hours: 17,208 h, load capacity: 12,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,280 mm, Equipment: cabin, .: 14547 Equipment Details: Year of Manufacture: 2010 Lift Capacity: 12,000 kg Lift Height: 5,500 mm Operating Hours: 17,208 h Mast Type: Standard Mast Height: 4,280 mm Length/Width/Height: 4,500 / 2,500 / 3,000 mm Operating Weight: 15,950 kg ---- Equipment: * Canopy * 3rd Valve * 4th Valve * Full Cab * Front Work Lights * Rear Work Lights * Dual Tires ---- Further Equipment Information: Without Fork Carriage---- The operating hours are generally based on the readings. We would be happy to offer you the appropriate transport option. Another 250-300 forklifts, attachments, and sweepers are available for immediate delivery. Also available for rent! We'd be happy to buy your old one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English This offer is subject to prior sale and errors. The equipment is sold in the dealer's shop as is, not refurbished. All information is provided without guarantee, errors, and changes excepted. Ledpfx Aajtx Urws Esak

Condition: used, Used stainless steel container / transport container / IBC Ledpfxju Ngqts Aa Eoak Last use: Solvent Item number: 10848 Volume: 800 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.10 bar Empty weight: 213 kg Tank dimensions: Total width: 1020mm Total length: 1220mm Total height: 1400mm Height of the feet: 100mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: yes Outlet diameter: 40mm Outlet valve: ball valve Distance drain to floor: 265mm

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Jung Heinrich Type: Esmena Technical specifications for installation: Number of rack rows: 1 Length per rack row: 30,977 mm Number of bays per rack row: 11 Number of levels plus floor level: 3 Technical data for volume: Pallet spaces per bay: 12 Number of pallet spaces per row: 132 Total number of pallet spaces: 132 Based on: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Scope of delivery includes: 12x pallet rack uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Height: 6,000 mm Depth: 1,100 mm 66x pallet rack crossbeams, used Material color: yellow Box profile: 116 x 40 mm Crossbeam type: GNA 116x40 SEG5 Hooks: 5 hooks Clear width: 2,707 mm Max. load per pair of crossbeams: 2,400 kg, with evenly distributed load. 132x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 48x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete Lajdpfx Ajwh R Egoa Eek 24x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.