Ultrasonic cleaning system

Laue Cleaning Technology GmbH NW 180 BSS

Condition: used, functionality: fully functional, capacity of 3 buckets, each 800 kg Nkjdpfx Agoxd H Itjwjw

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system type L122 automatically working hot water chamber washing machine with basket drive by gear motor, housing of the unit made of stainless steel 1.4301, - 2 pieces 3-sided arranged nozzle systems made of stainless steel with stainless steel flat spray nozzles, - 2 pieces washing pumps made of stainless steel (Fab. Xylem/Lowara), - level control as protection against dry running - 2 pcs. suction filter as pump protection - Oil skimmer for bath maintenance Nedpfx Agshl Ic Rewskw - basket diameter: 1.150 mm - useful height: 700 mm - max. loading weight: 300 kg - spray pressure: 2x 3 bar - tank capacity: 270 liters - heating: electrically adjustable (RT - 60°C) - connected load (electric): approx. 11,5 kW - plant dimensions (WxDxH): 1.480 x 1.540 x 2.195(h) mm

Year of construction: 2024, condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) -touch screen -injection pressure: 3 bar -basket load: 200kg -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump - Stainless steel filter on the suction side of the pump - Stainless steel heating elements Nkodpfx Agof A Nq Ujwsw - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator - Operating hours counter

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools Nedpfx Aorah Evsgwekw The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Nsdpfx Agev Igghswokw Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: excellent (used), Year of construction: 2011, CNC lathe Mori Seiki SL403B/800, year of manufacture 2011, Japan 2 axes - X axis 345 mm - Z axis 995 mm max spindle speed 2000 rpm Fanuc mapps MSX 500-IV control 18" Kitagawa B-18 (450 mm) chuck Nsdpeyffctjfx Agwekw turning diameter 620 mm max turning length 958 mm 12-position turret tailstock chip conveyor Renishaw probing system.

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Nedsu A U Utjpfx Agwokw The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity Nkodpfx Aorq Ebfjgwow

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Nodsxva Ahopfx Agwskw Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Nkjdpfxjxraime Agwow Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit