Biological brush washbasin

Laue Cleaning Technology GmbH bio. X C 100

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm Ledpfxewi Tidj Ahbshg speed -meters/sek: 15 m Location: Europe

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Lhjdpfx Ahjdz Spwebeg Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-medium aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture Model: A420 Length: 6 m Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser Lhodsf Eh Hdspfx Ahbsg QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, functionality: fully functional, input voltage: 400 V, input current: 634 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, power: 355 kW (482.67 HP), Exact type designation: Danfoss FC-103N355T4E20H4XGCXXXSXXXXAXBKCXXXXD0 Output power and output current: 355kW | 658A 135X0876 ° NEW in original packaging! ° Formed! ° Easy to use thanks to the integrated control panel Lhjdpfx Aherakufobeg ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Only 1 more in stock!

Condition: used, Linomat LN2 washer with filler, 2 active cleaning heads, Fully automatic, fully electronic KEG interior cleaning and filling machine, for different KEG sizes 15-50 L KEG, for containers 20 ltr. - Performance 35 -40 containers / h Lhjdexytvpspfx Ahbog The Keganlage runs on Schlankkeg- basket fitting. Build in 1992, very good condition and fully functional, tested by Seegräber GmbH

Condition: used, TECHNICAL DETAILS - Media : A3 type - Installed power : 8 [kW] - Media volume : 80 liters - Basket dimensions : 300 x 200 x 150 [mm] - Cooling : water - Tank 1 : washing with serial filtration - Tank 2 : rinsing with serial filtration Lhjdeug U R Hspfx Ahbeg - 1 washing tank : 300 x 200 x 150 [mm] - Continuous distillation : 25 [l/hour] - Size (W x L x H) : 1200 x 1800 x 1500 [mm] EQUIPMENT - Loading system : manual - Ultrasounds : yes - Vapour degreasing : yes - Vacuum drying : yes - Cooling unit HITEMA ECA.008

Year of construction: 2001, condition: good (used), Hettich Rotina 35 R refrigerated centrifuge Large, easy-to-read display During the run, the ACTUAL status of all parameters is displayed. Speed RPM: Input in steps of 10. Relative centrifugal acceleration RCF: Input in steps of 10. Switching function RPM/RCF: By entering the radius r/mm Calculate and display the speed or RCF. Time: Input in minutes and seconds, max. 99 min, 59 sec. Temperature: Input in steps of 1 from -20°C to +40°C Speed: n= 15,000 min-1 / RCF 24,400  Temperature in the spin chamber: infinitely variable from -20°C to +40°C 1-99 min, ∞ (continuous run), IMPULSE key (for short run in seconds) Dimensions (HxWxD): 380 x 468 x 695 mm Voltage: 208-240 V  Weight approx.: 70 kg incl. rotor 1717 / 10x60g / 5000 RPM Item condition: used  Scope of delivery: as shown Further articles - new and used - you will find in our shop! Lhedpfxohtuwlo Ahbog International shipping costs on request!

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Intermediate plate: for hydraulic press eccentric press -Width: 1630 mm Lsdpeb A Sgbsfx Ahbshg -Length: 1250 mm -Height: 100 mm -Plate: Solid -Groove width: 22 mm -Weight: approx. 1000 kg

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2680 mm -Swivel range: 270° -Chain hoist: HADEF type CH1 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 550 kg Ledpjxwtw Ujfx Ahbohg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DETAILS Maximum balancing weight: 2,000 kg Balancing body diameter without machining unit: 10 mm Bed length: 3,000 mm Swing diameter over machine bed: 2 mm Rotor shaft via belt drive: 10 mm Drive unit balancing speed (5 gears): Max. 80 / 160 / 290 / 470 / 630 rpm Measurement method: force measuring Electronics speed measurement range: 60 to 30,000 rpm Center height measured in bed: 1,200 mm Rollers: 2x 195 x 56 mm Axle spacing: 205 mm Adjustment travel: 3 mm vertical MACHINE DETAILS Drive power: 22 kW Compressed air: 6 bar Connected load: 25 kVA / 20 kW Lhjdpfsw T Sqmox Ahbeg Machine weight: approx. 5,500 kg Machine dimensions approx. (L x W x H): 3.3 x 1.5 x 2.0 m Control cabinet dimensions: 6 x 610 x 21 mm EQUIPMENT - Measuring electronics PCX - Base frame (cast steel body) - Mounting length between bearing supports up to approx. 3,000 mm - Adjustment with hand ratchet via rack - Bearing supports/swing bearing blocks: 2 pieces