Combined contact belt sanding machine

LÖSER DP 15

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Ppedpfx Aspugwiecvjp Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. Pjdpfx Astmqi Decvepp The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Year of construction: 2005, condition: ready for operation (used), A centerless round and polishing belt grinding machine Loeser (RPS 376/2+2), retrofitted in 2024, is available. Stations grinding/polishing: 2/2, grinding range: 10mm-120mm, belt dimensions X/Y: 3000mm/200mm, feed rate: 15m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Podpfxjxhnr Io Acvjpp

Condition: new, Year of construction: 2025, total width: 2,000 mm, total height: 2,000 mm, total length: 1,620 mm, working width: 1,100 mm, overall weight: 1,000 kg, power: 12 kW (16.32 HP), input current: 20 A, sheet thickness (max.): 120 mm, sheet thickness steel (max.): 120 mm, Deburring up to 1100mm. Deburring of metal-cut parts up to 1100mm wide. Ppsdpfjtzfpksx Acvop DM1100 Z finishes and deburrs light metal sheets cut by laser, punching or shearing. This machine has a single wide belt station that can be used to deburr parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing, where it can be used with both standard sandpaper and non-woven/scotch belts. DM1100 Z Working capacity (mm) 1100x120 No. of belt stations (Z) 1 Sanding belt, dimensions (mm) 1100x1850 Sanding drum specifications Ø186mm Sanding belt speed (m/s) 8-22 Feed speed (m/min) 1.5-10 Sanding belt motor per head (kW) 11 Feed motor (kW) 0.18 Total power (kW) 12 Power consumption (A) 20 Rod suction connection per head (Ø mm) (1x) 152 Dimensions (mm) 1620x2000x2000 Weight (kg) 1000

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Ppedpjucw Rbefx Acvep The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, pass-through width: 1,500 mm, workpiece height (max.): 102 mm, One machine for all tasks: removing slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes The EdgeRacer the Grinder effortlessly removes slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the bottom side, allowing the steel pins to knock off the slag. Powerful deburring and defined edge rounding EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. The degree of edge rounding can be set by adjusting the brush feed. Deburring and edge rounding of thin sheet metal and 3D workpieces Psdpfxewzybko Acvepp Deburr thin sheets or parts with cut-outs. The abrasive brushes can be lowered below the transport level so that the entire workpiece edge is processed. The oxide disc allows oxide layers to be removed from both internal and external contours. Maximum working width or double performance – optimally adapted to your needs Depending on the width of the parts to be processed, you can choose between two processing modes. Choose single-row processing to fully utilize the working width, either for wide panels or parallel loading. The brushes automatically change position to optimize tool wear. For narrower workpieces, select double-row processing to achieve double the throughput in just one pass.

Condition: excellent (used), Series 12-225-WRD Pjdpeymlfdsfx Acvopp 1st station sanding belt for removing burrs and laser spatter 2nd station disc for light edge rounding Pass-through width 225 mm incl. TEKA extraction system

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1650 mm Weight 440 kg Psdpfx Acov A Hdisvspp Total power requirement 6,5 kw