Mini excavators

Kubota KX 060-5 - 5,6 Ton.- Powertilt + hydraul. Schnellw

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 30,800 kg, Year of construction: 2021, Equipment: cabin, steel tracks, CATERPILLAR 330, year 2021, 8699 hours, weight 30,800 kg, 205 kW, equipped with hammer/clamp system, quick coupler, locking valves, original paint, no welding repairs. Hedpfxjzrtluj Aivsnt

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Hnsdsyddyzjpfx Aivst

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Yunnei EUR5, total height: 2,650 mm, total length: 3,900 mm, total width: 2,080 mm, Equipment: air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, 4x4 all terrain forklift CE EUR5 Diesel engine EUR5 Yunnei DEF30CZEF5 74 kW 100 km 5T lifting capacity forklift weight 7200kg triplex mast 5m lifting height pneumatic tires air-conditioned cabin 1220mm fork length additional bucket included Hjdpfx Asuzivvjivjnt additional 2000mm forks the fork is NEW CE certyficate PayPal payment available

Condition: new, Year of construction: 2025, machine/vehicle number: 381201764, Gasparin GI118CV OLIMPO Hodehd I U Eepfx Aivent Mobile jaw crusher on a tracked chassis The sheer power that the OLIMPO delivers thanks to its 1100x800 crusher is the ideal prerequisite for a specialized machine for professionals in quarries and recycling plants. This uncompromising machine was developed with a focus on meeting the requirements for operation, productivity, effortless maintenance, and transport. Equipped with state-of-the-art control and operating systems, it is easy and user-friendly while also being environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing maximum profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest level of robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The OLIMPO crusher certainly delivers convincing and unparalleled performance both in natural stone applications, in recycling, and in rental operations. Production capacity: approx. 360 tons/hour Patented HCS system Proportional valve with "Load Sensing" for optimizing the system and reducing fuel consumption by approx. 30%. Optional pre-screening Hydraulically adjustable crushing gap, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3200 mm Dust extraction system Tank pump Magnetic separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the system Technical data: Jaw crusher 1100 x 800 mm Crushing gap from 50 to 200 mm Hopper 5 m³ - 2000 x 3970 mm, foldable for transport dimensions Two-deck vibrating screen 1020 x 2000 mm Main conveyor belt 1000 x 11000 mm 4-cylinder diesel engine with constant speed, 82 hp/60 kW, emission stage V Control panel Tracked chassis 450 x 3800 mm Weight: kg Transport length 13850 mm Transport width: 2550 mm Transport height 3390 mm Further information Intended use: Construction General condition: very good Technical condition: very good Optical condition: very good

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. Hsdszb Evlepfx Aivjnt AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Condition: used, Year of construction: 1999, Equipment: all wheel drive, FAUN RTF 40-3 very good condition repainted in 2021 currently in use with us Trade-in possible under certain conditions / LFBK / Brillen Fzg. / AWU Hodpfx Aewpn Sasivent APU / VSN / eligible for GDV listing New general inspection (HU) New UVV inspection

Condition: new, fuel type: diesel, color: yellow, operation weight: 2,000 kg, chain condition: 100 %, emission class: euro5, Year of construction: 2026, Equipment: UVV, additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, standard shovel, NEW: Shantui SE20 Mini Excavator (2.0 t) Premium features at a great price – Now available for pre-order at Bagger2go! The brand-new Shantui SE20 is here! Compact, powerful, and equipped with high-quality features – ideal for gardening and landscaping, civil engineering, construction companies, and rental companies. Impressive technology: • Engine: Kubota D902 – powerful, reliable, and low-maintenance • Rotator: Original Danfoss – proven quality • Hydraulics: Hengli components – robust and efficient • Chassis: hydraulically adjustable from 99 cm to 130 cm – ideal for narrow access routes • Articulated boom: maximum flexibility even in confined spaces Hedpfewg Etijx Aivont • Two speeds: precise maneuvering or fast routes • Hydraulic control: AUX 1 & AUX 2 digitally controlled – flow rate precisely adjustable • Control: Proportional joysticks with rocker switches – intuitive and precise operation Your advantages: • Secure your order now – special conditions for a limited time only • Lease-to-own available – we offer flexible financing solutions • Directly from Bagger2go GmbH – your partner for compact construction equipment

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,274 h, load capacity: 8,000 kg, lifting height: 26,600 mm, fuel type: diesel, construction height: 3,120 mm, empty load weight: 22,500 kg, total length: 8,250 mm, drive type: Diesel, arm reach: 23,100 mm, construction width: 2,530 mm, Rotating telescopic handler Speed class: 40 Hnsdjvgi A Nspfx Aivot Technical condition: very good Description: The Magni RTH 8.27 is a powerful rotating telescopic handler for assembly, lifting and material handling on construction sites and in industrial applications. With a lifting height of up to 26.6 m, a lifting capacity of 8,000 kg, the continuously rotating upper carriage and all-wheel drive, the machine is ideal for heavy loads, work at height and operations on difficult terrain. High reach and excellent off-road capability. Robust, powerful and easy to operate. Further information and a non-binding inquiry can be found on our website - Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sale, service & repair. With us, you get everything from a single source. Lease-purchase, financing and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.

Condition: used, Year of construction: 2021, operating hours: 3,350 h, Equipment: air conditioning, Empty weight: 16.000 kg Hsdjzi Eb Aopfx Aivsnt Dimensions (LxBxH): 777 x 249 x 296 cm Engine type: Deutz DEUTZ TCD 3.6L4 Digging depth: 5.195 m

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Hnodpfx Aet Ac Efjivjt Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition