Centrifugal KSB KRSF-BLOC- 50-200

KSB KRSF-BLOC- 50-200

Year of construction: 1992, condition: used, Modell: KSB KRSF-BLOC 50-200, used Typ: KRSF BLOC 50-200 Kfodpfxsiztvae Aa Eja Centrifugal pump Manufacturer Year: 1992 P-Nr.: 5-L40-757 504/2 Q: 9,70 l/s H: 12m n: 1450 1/min

Condition: used, mileage: 575,445 km, power: 62 kW (84.30 HP), first registration: 12/2010, fuel type: diesel, empty load weight: 1,813 kg, maximum load weight: 987 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 5,292 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2010, construction height: 1,970 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter, built in 2010, is a used panel van with a mileage of 575,445 km. It has a 2.0 TDI diesel engine with an output of 62 kW (84 hp) and a displacement of 1,968 cc. The emissions class corresponds to Euro 5 and the CO2 emissions are 190 g/km. The van has a 5-speed manual transmission and offers space for three people. In terms of equipment, the T5 Transporter is functionally equipped. It is equipped with sliding doors on both sides, which allow flexible Kfedpfx Aaotfa Rlj Eja access. The wing doors in the rear area make loading easier. The vehicle also has Parktronic, which makes parking and reversing easier. The interior is equipped with a robust wooden panel in the loading area, ideal for demanding transport tasks. With dimensions of 5,292 mm long, 1,904 mm wide and 1,970 mm high, the vehicle offers a good balance of usable space and maneuverability. The approved total weight is 2,800 kg. Combined consumption is 7.2 l/100 km, which is efficient for a vehicle of this size. The used van is available in broom yellow (R1032) and has a truck registration. It offers a practical solution for commercial users who value reliability and functionality. Sold only to commercial users (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Kjdpfx Aaeqabiao Esfa Height: 1090 mm Weight: 1420 kg

Year of construction: 1987, condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Kodjh S Nz Sopfx Aa Eofa Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: good (used), functionality: fully functional, fuel type: diesel, tire condition: 80 %, Year of construction: 2006, machine/vehicle number: JK6CBA04500010441, Equipment: cabin, hydraulics, Product Description Used Hitachi ZX160W hydraulic wheel excavator Brand : Hitachi 160 Year : 2006 Model : ZX160W Machine sold as its condition please contact, VIJAY JPN Industrial Trading Pte Ltd Kedpoul Uyysfx Aa Eefa 13A Pandan Crescent, Singapore 128478

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Kfedpfefupadox Aa Eea Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed Kfodpfx Aaevvl Uge Esa • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Year of construction: 2022, condition: like new (used), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 RAFFRED. GMP150+2xPTUN2000 COOLING SYSTEM As good as new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following parts. - Hopper. - Holding frame. - Heating chamber. - Connection lines. Kfodpfx Asvhb S Sea Eja - Air control valves.

Condition: new, Year of construction: 2024, Genie S-45 Trax-XC (Xtra Capacity, up to 454kg load capacity), new, used, demonstration machines available Kjdpfx Aaerpzguj Ejfa

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Your authorized ISUZU specialist dealer with expertise, service and advice offers you: Kfjdpfxsh Il Haj Aa Eea New ISUZU NPR vehicle with ZOELLER Micro XL 7m³ waste collection body 3-year guarantee on the basic vehicle from the day of first registration or 100,000 km Standard equipment: - 5.2 liter turbo diesel with common rail direct injection 140 kW / 190 HP EURO VI OBD-D (max. torque 510 Nm at 1,500 rpm) - Particle filter system with DPD system and AdBlue (the self-cleaning system enables the filter to be cleaned without a visit to the workshop, thanks to the new DPD regeneration technology, which indicates when the function is needed. All you have to do is press the DPD button and the system cleans itself in 20 minutes) - Automated manual transmission (NEES II) with 6 gears, converter and cruise control. A built-in flow converter ensures wear-free and finely controlled starting! The gears can also be shifted sequentially manually using the selector lever. Depending on the load, the driver can use a button to preselect whether the vehicle should start in 1st or 2nd gear.) - Power steering - Leaf spring front axle (max. axle load 3,100 kg), leaf spring rear axle (max. axle load 6,000 kg) - Engine brake, cruise control - ABS with EBD and electronic traction control on the rear axle (ASR) - Electronic vehicle stability control (EVSC) system - Lane departure warning - Emergency braking assistant (AEBS) - Wheelbase 3,365 mm, traction tires 215/75 R17.5 - Spare wheel - Suspended driver's seat - Passenger double bench seat, 3-seater - Electric windows, electric adjustable and heated exterior mirrors - Electronic. Immobilizer, daytime running lights - CD radio with Bluetooth - hands-free system - Digital EG ? Control device 4.0 (GNNS) - Fog lights - Driver and passenger airbag, headrests - Height and tilt adjustable steering wheel, interior mirror - Central locking with radio remote control - Cigarette lighter, cup holder, headrests - Storage compartments in the door panels and on the roof lining Vehicle structure: Auxiliary drive / single-circuit hydraulic system complete with hydraulic pump, oil tank, lines Waste collection ? Structure type ZOELLER Micro XL 7m³ * Usable volume of 7 to 8 m³. * Structure width 2,000 mm. * Tailor-made for chassis with a permissible total weight of 7.49 or 8.5 t. * Consistent lightweight construction using high-strength materials. * 2 externally attached reinforcement profiles. * Front wall of the container closed 220 mm high. * Liquid-tight welded floor assembly * Collection container connection without intermediate frame * Low-wear guidance of the discharge shield on plastic sliding blocks. * Double-acting hydraulic telescopic cylinder for moving the discharge shield. * Recyclable material circuit with continuously adjustable valve for counterpressure adjustment of the discharge shield, adaptable to the different fractions * Ergonomic control terminal arranged in the driver's work area. * Sophisticated and reliable technology. * Enormous maneuverability. * Significantly reduced maintenance effort thanks to the standard electric central lubrication (also available as an option for the hopper). * Maintenance-friendly central electrics for high availability. * Long service life of the loading trough thanks to the manufacture from 4 mm thick, highly wear-resistant steel and side walls made of 3 mm steel. * Compaction mechanism mounted on sliding blocks. * Safety equipment in accordance with the Machinery Directive 2006/42/EC