Swarf Conveyor

KNOLL 225S-2

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Pjdpst Hagnofx Aa Eoha Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: good (used), Technical specifications: Briquetting press in good condition Pedpfx Aaowtdk Te Ejha Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: excellent (used), consisting of: 2 pcs. Art. No. 47155: Makro Grip 125 Centering Vise, clamping range 155 mm 1 pc. Art. No. 41350: Extended Stamping Unit 1 pc. Art. No. 41010: Center Marking Device for Stamping Unit 16 pcs. Art. No. 45570: Mounting Bolts, diameter 20 mm 1 pc. Art. No. 47520: Double Mounting Body 1 pc. Art. No. 47355: Makro Grip 125 Centering Vise, clamping range 355 mm 1 pair Art. No. 44251: Avanti Base Jaws 4 pcs. Art. No. 44258.76: Top Jaw 77x126mm for Avanti 125 4 sets Art. No. 45570.10: Spacer Mounting Bolts, diameter 20 mm 2 pcs. Art. No. 47255: Makro Grip 125 Centering Vise, clamping range 255 mm 3 pcs. Art. No. 45742: Plate L384xW384xH27 mm, 4-position grid plate 96 (photo attached) 1 set Art. No. 47355-TG27: Twin-Grip Conversion Kit for Makro Grip 125 No. 47355 1 pc. Art. No. 47520: Double Mounting Body Pjdpfx Ajxauacea Eeha 1 pc. Trolley for Stamping Unit

Condition: reconditioned (used), Year of construction: 2003, operating hours: 58,816 h, functionality: fully functional, Heidenhain iTNC 530 Machine on-time: 58,816 h, Spindle on-time: 21,604 h Spindle SK40, 18,000 rpm 38 tool positions Linear axes, standard version Rotary table SRT 800 mm – torque A-axis with dual-sided drive External coolant supply Through-spindle coolant (IKZ) 40 bar with paper band filter BLUM tool breakage detection / measurement Chip conveyor Handwheel Thermal compensation Heidenhain touch probe Oil mist extraction Pedjx Hn Euopfx Aa Eeha Very well-maintained condition

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 20,000 mm, total length: 20,000 mm, total width: 20,000 mm, power: 0.004 kW (0.01 HP), Fully hydraulic high-performance band saw in heavy-duty design, with horizontally Pjdpsrnkruofx Aa Eeha parallel moving band saw blade, for cutting profiles, pipes and solid material solid material in all qualities, including materials that are extremely difficult to cut (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit made of solid polymer concrete, This ensures maximum running smoothness and service life of the saw bands. The saw unit is guided by a vertical and a round column guide. (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw band guides. The material is clamped using two hydraulic clamping vices. The condition of the machine offers simple machine operation. The length can be set on the handwheel with a resolution of 0.1 mm. The number of pieces is set via a piece counter and the machine is switched off when the number of pieces is reached. The material is fed via a feed cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA 260 mm x 260 mm Ø 260 mm) Technical data: Bandsaws KASTO Automatic band saws Machine type SSB 260 VA Technical data 2 column guided Year of construction 1991 Cutting area 260x260 mm Drive power saw gear. 4 KW Drive power auxiliary units 6.5 KW Cutting speed 15-125 m/min Saw feed hydraulics infinitely variable Saw blade dimensions 4115x41x1.1 mm Feed length 600 mm Max. with multiple feed 5400 mm Material support 850 mm Machine dimensions Length/width 1690x1900 mm Height 2030 mm Weight of the machine 2100 kg Accessories Chip conveyor Coolant device Multiple feed Side guide rollers Machine roller conveyor Adjustable side guide rollers Prepared for bundle tensioning device Multiple feed counter Hydraulic hold-down device

Condition: used, Year of construction: 2024, controller manufacturer: Sonstige, _____ Description: Year of manuf. : 2024 Control : Sonstige In General: Year of manufacture:2024 Phedpfsxv Nkuox Aa Esa Traverse path X/Y/Z:800/ 1,500/700 mm Maximum table load:800 kg Measuring accuracy:0.0005 mm Repeat accuracy:0.002 mm Touch probe:Renishaw PH 10M Plus

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm Phodpfst U R Hzsx Aa Eja travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: type plate available, Fast precision coordinate measuring machine and gear measuring center. Moving gantry with patented TRICISION™ technology X 900 / Y 1500 / Z 700 B5 control system (retrofit 2021) Phedpfx Aaov S Dk Eo Eja High-resolution Leitz LSP-S2 3D measuring head Measurement uncertainty according to DIN EN ISO 10360-2: 0.9 + L/350 µm 8-position probe change system Large package with probe accessories PCDMIS CAD++ 2024 software 12-month warranty Computer, 32" screen Installation, commissioning, and acceptance according to DIN EN ISO 10360-2, 4, and 5

Condition: good (used), Year of construction: 2002, machine/vehicle number: 6428 104 014, Offer 25258 Technical data: - Cutting range at 90° round: 400 mm - Cutting range at 90° flat: W 400 x H 400 mm - Shortest cut-off length: 6 mm - Smallest diameter to be sawn: 10 mm - Minimum remnant length for single cut: 15 mm - Minimum remnant length in automatic mode: 80 mm - Material feed length, single stroke: 750 mm - Material feed length, multiple strokes: 20,000 mm - Saw band dimensions: 5700 x 41 x 1.3 mm - Cutting speed, stepless: 20 - 110 m/min - Hydraulic lifting/lowering of saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 8.0 kW - Bundle clamping device - Coolant system - Chip conveyor - Required space approx.: W 3000 x H 2200 x D 2300 mm Phjdpfx Aaexc Hinj Eoa - Weight approx.: 2,800 kg

Condition: used, operating hours: 6,060 h, load capacity: 7,500 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, * Jungheinrich DFG 75 forklift * Year: 1992 * Hours: 6,060 h * Triplex mast * Max. load capacity: 7,500 kg * More pictures and videos via Whatsapp * Information without guarantee and subject to prior sale. Phsdpfx Aaovtlmqo Eja