Center grinding machine

Klein

Condition: used, A Klein & Söhne rigid table router or rigid router for profiling and routing timber, fitted with an Aigner integral stop. Technical data: - Spindle diameter: 30 - Clamping length: approx. 120 mm - Speed (milling cutter): 3,000/4,500/6,000/9,000 rpm Hedpfxszryqds Ac Tet - Direction of rotation: anti-clockwise and clockwise

Condition: good (used), Year of construction: 1993, Power generator is in good working condition. Hsdpfx Aeyh U Tqjc Tot Technical details shown on machine plate.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, We offer a galvanized air receiver – 5000 liters. Manufacturer – OKS Otto Klein GmbH Hsdpfx Ajzt Icqec Tst Maximum working pressure – 11 bar Year of manufacture – 2019 Dimensions: Diameter – 1400 mm Height – 3570 mm Weight – 1050 kg Air receiver with data plate. Air receiver including fittings – overpressure valve, pressure gauge + flanges. Air receiver, air tank, pressure vessel.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions (L x W x H) 4100 x 2100 x 2100 mm -External dimensions (with rails) 9970 x W 3060 x H (with lifting door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at nominal temperature, without load) ±5 °C -Automatic inlet and outlet dampers -Electric lifting door Hedpfxsu Hma Ns Ac Tet -Electrically driven furnace car -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be happy to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heating furnace, furnace, tempering furnace, sintering furnace, drying oven, industrial furnace, heating chamber, warming oven, temperature furnace, drying cabinet, chamber furnace, large-capacity furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Year of construction: 2012, condition: used, machine/vehicle number: 9620, Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben. Hodpfx Aozcbpqoc Tjt Nähere Daten und weitere Bilder gern auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben.

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 L -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 160 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 110 mm -Number: 3x blowers available Hjdpouqf Ufsfx Ac Tjt -Price: per piece -Dimensions: 370/340/H320 mm -Weight: 8.1 kg/piece

Condition: used, Thermal system, fan heater, heating elements, radial heater fan -Handover: in current condition as viewed -Controller/On/Off switch: missing -Heater fan: with temperature display -Heating capacity: unfortunately not specified -Blower: Karl Klein Type DNG 1-1,5K -Blower power: 0.45 kW / 31 m³/min -Outlet: Ø 60 mm Hsdpoub D R Eefx Ac Tst -Number: 3x blowers available -Price: per piece -Dimensions: 320/265/H475mm -Weight: 10.2 kg/piece

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2808, total height: 2,400 mm, total length: 3,300 mm, total width: 2,200 mm, feed length X-axis: 450 mm, feed length Y-axis: 250 mm, feed length Z-axis: 350 mm, overall weight: 7,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, CNC grinding center for external, internal, and profile grinding with three linear axes and a swiveling grinding head. Modularly configurable for various grinding tasks, featuring automated dressing cycles, modern control system, tool management, and options for measurement systems as well as peripherals such as coolant treatment and extraction. Hedpfx Acjxuiche Tet

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower Hsdsun Dwgspfx Ac Tet -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 165 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 108 mm -Dimensions: 370/365/H310mm -Weight: 8.2 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, radial fan, medium-pressure fan Hedpfx Asp A A Saec Tet -Manufacturer: Karl Klein, medium-pressure fan type DMV 350 -Motor: away 1.1 kW/ 2765 rpm Voltage: 380 volts -Volume flow: 1260 m³/h -Pressure: 2380 Pa -Connection input: Ø 150 mm -Connection output: 60 x 100 mm -Quantity: 1x piece available -Transport dimensions: 500/485H340 mm -Weight: 30 kg/piece

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW Hjdpovbh N Rjfx Ac Tet machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: good (used), High-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 0.12 kW -Speed: 2780 rpm -Volume output: 252 m³/h -Pressure increase: 240 Pa -Inlet connection: Ø 142 mm -Output connection: 56 x 52 mm -Quantity: 1x blower available Price: per piece -Dimensions: 270/180/H160 mm Hjdpfxsd D Ri Ns Ac Tjt -Weight: 4.8 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Karl Klein, blower radial fan -Type: DNG3-9.8/S WS L -Motor power: 0.07-0.16 kW -Speed: 2580 - 2810 rpm -Volume output: 445 -485 m³/h Hedpfx Asw Ava Sjc Tet -Fan wheel: Ø 135 x 60 mm -Connection input: Ø 100 mm -Connection output: 80 x 65 mm -Quantity: 5 pieces available -Price: per piece -Dimensions: 430/200(H265 mm -Weight: 5.8 kg

Condition: used, 2,000 linear meters of structural profiles, U-shape Used, good condition, see pictures Galvanized Length per piece approx. 467 cm Profile 7.5/8 cm Material thickness approx. 3 mm Weight per piece approx. 43 kg Negotiable price: €4.90 net/linear meter ex warehouse Available individually or in packs One pack consists of 20 pieces – approx. 93.4 linear meters Hodpfeulwiqex Ac Tet Goods are in stock. Transport possible upon request. Inspection possible at any time by appointment. Further information available upon request. We have over 5,000 linear meters of pallet racking from numerous manufacturers in stock at all times. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking to buy high-quality warehouse racking? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY/BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance projects, we offer a complete, all-round service package: 1. Flat-rate purchase: Purchase of commercial goods, equipment & complete stock including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Thermal system, fan heaters, heating elements, radial heaters -Manufacturer: Karl Klein, fan with heater: HVL 150 -Fan: Type ENG 3-6 K/S30 -Power: 100 W / 7.8 m³/min -Heating attachment: Type 8.0104 1500 W -Inlet: Ø 170 mm -Outlet: Ø 55 mm -Quantity: 3x blowers available -Price per piece -Dimensions: 280/250/H270 mm Hsdorkp Nxopfx Ac Tot -Weight: 6.2 kg/piece