3D production measuring system

Keyence XM-5000

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Seriennummer 90319000000, measuring range X-axis: 500 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, The following components: XM-5000A 3D measuring system / serial number 9031900000. 2 measuring probes. LAPTOP for the XM production measuring system with measuring software on Windows 11. Measuring table for the production measuring system. User manual in German. Measuring range: X: 500 mm, Y: 300 mm, Z: 200 mm Measuring accuracy: (7+9L/100) micrometres Dodpeyi E Ikjfx Acxeup Repeatability: ± 3 micrometres The system was only used for a specific measuring application for measuring parts in special purpose machine construction. No use in production. The system was delivered on 20.06.2024 directly from Keyence.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, total length: 12,200 mm, total height: 2,890 mm, total width: 2,440 mm, power: 1.65 kW (2.24 HP), fuel: diesel, Equipment: type plate available, These are three emergency generators, each with a 2000 kVA capacity and 1600 kW continuous output at a cos phi of 0.8. Voltage: 10 kV, frequency: 50 Hz. A viewing is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamfort Design: 40" soundproof container with a sound level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg The data sheet (German and English) is attached. The container also contains a 2,000 L tank for the initial diesel supply. Djdpfx Acsqqhuyexoup The generators are regularly tested under load.

Condition: used, Year of construction: 2023, Due to a new requirement in our production, a KEYENCE XM-5000 is being sold. The measuring system was purchased directly from KEYENCE in 11/23. These additional details may be of interest to you: Dusdox Sv Stepfx Acxjp - Faster and simpler measurement enables significant time savings - Measurements can be performed in the machine / mobile measurements are possible - All users can measure without significant operator influence; additionally, every measurement is documented and thus traceable - Inspection reports simplify communication - The statistical and analysis functions allow for better assessment of product quality, enabling quality improvements - Reverse engineering capability - No maintenance contracts

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Dusdpsvw Tdlsfx Acxep Technical specifications: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract

Condition: new, 10 St. weight 162 kg range L-W-H 1200 x 800 x 1050 mm Workshop trolley with 30 mm thick solid wood panel. Solid drawers with ball bearings (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors have a magnetic lock and lock. Duedou Imluepfx Acxsp Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. Scope of delivery: 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy firm roles. 1 x robust handle made of solid steel. 3 x lock for all drawers and doors.

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Dusdpfxoq Nyw Ao Acxjp Year of construction 2008 Power 90KW Main fuse 200A Working pressure 285bar flow rate 165L/min Tank 850 litres The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 42.000 1/min tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, laser, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, oilmist suction, spindle chiller, Djdpjwzx Nmjfx Acxoup no internal coolant supply, approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in total machine in good condition (test report available) *

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Dujdpfx Acsinh Rqoxsp Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 20,500 kg, fuel type: diesel, tank capacity: 1,500 l, color: white, power: 1,000 kW (1,359.62 HP), output current: 1,811 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 1,000 kW (1,359.62 HP), nominal power (apparent): 1,250 kVA, continuous power (apparent): 1,250 kVA, total length: 6,060 mm, total width: 2,440 mm, total height: 2,900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, 6 units available. Diesel Generator Container – Cummins KTA50-G3 – 1,250 kVA Many other sizes available from 1,000 kVA – 2,500 kVA! For sale: one soundproofed diesel generator set in a 20-ft container, suitable for emergency (standby), island (off-grid), and grid-parallel operation. The unit is configurable for 50 Hz operation and comes fully equipped for automatic backup power applications. Performance Data 50 Hz PRP: 1,250 kVA / 1,000 kW / 1,811 A Voltage: 400 / 230 V Djdpfjygaavsx Acxoup Power factor: cos φ 0.8 LTP: 1,375 kVA Main Components Diesel Engine: Cummins KTA50-G3 Generator: Stamford PI734B Power Output: Integrated generator circuit breaker Connections: M12 cable lugs on copper busbar Noise Emission 75 dB(A) at 7 m ±3 dB(A) Operating Modes Island/off-grid mode Grid-parallel operation (with synchronizing device) Emergency power mode (integrated mains monitoring) Seamless resynchronization External circuit breaker control possible Equipment Engine pre-heater Battery charger Rapid power availability in case of mains failure: < 15 seconds 1,500-liter integrated diesel tank, switchable to external tank via 3-way valve Oil-resistant container base (catch basin for all fluids) Connections available for external/mobile fuel tank systems Container / Generator Construction Soundproofed design, 20 ft standard container Exhaust outlet: top Air outlet: top Air inlet: front side Dimensions: Length: 6.06 m, Width: 2.44 m, Height: 2.60 m + 0.30 m exhaust flap Weight: approx. 20.6 t incl. diesel Fields of Application: Emergency power supply, industrial facilities, infrastructure, construction site power, temporary power supply Price: on request Location: Pupping, Austria Availability: 6 units in stock

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Each of our welding rotary tables is designed in-house and manufactured with high quality components. Dodpfx Acog Urz Hsxjup We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. The new generation APSI are already in stock.