Full-container reach stacker

Kalmar DRG450-65S5

Condition: good (used), machine/vehicle number: 3519, Year of construction: 2023, load capacity: 45,000 kg, lifting height: 15,260 mm, mast type: telescopic, total length: 12,000 mm, total width: 4,250 mm, operation weight: 79,690 kg, additional equipment features: Centralized greasing system, Hydraulic sliding cabin, Engine heater, Equipment: lighting, Kalmar DRG450-65S5XE from Uniktruck Itjdsxflkvspfx Ag Ueb

Condition: used, Year of construction: 2021, control Heidenhain TNC 640 travel -x axis 3.500 mm travel -y axis 1.200 mm travel -z axis 1.500 mm turning speeds 4.000 U/min Maximum power 37 kW Iodpox A H Scsfx Ag Uotb max. torque 644 Nm indexing 2,5 ° working area 3.700 x 1.000 mm max. table load 9.000 kg diameter of tools max. 125 (250) mm tool length - max. 400 mm General: - Gear spindle: SK 50 Milling head (spindle): - Technology: Diagonal head with gear spindle Tool magazine: - Technology: Chain magazine - Tool changer: Double gripper - Number of stations: 40 Equipment/accessories: - Position measuring systems: Direct in all axes - Chip disposal: Chip conveyor - Coolant supply: IKZ system, 20 bar - Workpiece measurement: Renishaw measuring probe - Setup mode: Electronic handwheel - Software option: Adaptive Control

Condition: used, Year of construction: 2024, load capacity: 45,000 kg, lifting height: 15,100 mm, - Reachstacker für die Handhabung von Containern - Kapazität: -> 8'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 45.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 8'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4/5-high -> 9'6" Container: 32.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 8'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3/4-high -> 9'6" Container: 16.000 kg Tragkraft - Stapelung 1/2/3-high - Mast: langlebiger und geschweißter 2-stufiger Duplexausleger mit Kasten- und Teleskopausführung - Zwei Hubzylinder im Fahrgestell/Ausleger und ein Ausschubzylinder im Ausleger, Ausfahrhub von 7.000 mm für die Handhabung von bis zu 3 Reihen tief, normale Auslegerspitze - Toplift-Spreader für den Containerumschlag, maximale Tragkraft 45 Tonnen, teleskopierbar 20ft-40ft, 2 hydraulische Rotationsmotoren und 2 hydraulische Rotationsbremsen, für dauerhaftes und sicheres Handling - Seitenverschiebung ± 800 mm (insgesamt 1.600 mm) - Mechanische Pfahlneigung ± 5 Grad (Seitenneigung / Nivellierung durch Schwerkraft) - Motorische Drehung Grad - Endträger mit 4 starken Hebehaken für Schlingen (4 x 12,50 Tonnen Tragkraft), aber max. 45 Tonnen - Sicherheitsverriegelung mit 4 Ausrichtungsstiften und 4 Sensoren, montiert in Twistlock-Endträgern Iodpfox Sr Nuex Ag Uetb - An der Auslegernase montierte LED-Anzeigetafel für den Containerumschlag - In der Kabine montiertes LED-Head-Up-Anzeigedisplay für die Containerhandhabung - Motor: Dieselmotor Volvo TAD1181VE6 - 6-Zylinder-Reihenmotor, Turbolader und Ladeluftkühlung, Volumen 10,84 Liter - Leistung, Nenn-/Maximalleistung: 265/265 kW bei 2100 U/min - Drehmoment, max.: 1785 Nm bei 1400 U/min - Ölwechsel nach 1.000 h und Filterwechsel nach 1.000 h (ohne Ölprobenentnahme) - Getriebe Dana TE30510 - Automatische Lastschaltung und hydrodynamischer Drehmomentwandler - Sperrschutz für Fahrtrichtung – vorwärts/rückwärts. - Steuerung und Überwachung: Elektronischer CanBus. - Gänge: vorwärts 5 – rückwärts 3. - Kabine: Alle Schalter in der Kabine sind mit LED-Leuchten ausgestattet - Head-Up-Display in LED zur Drehverriegelungsanzeige. - 2 x 24-V-Steckdosen in den Türsäulen - Sitz Gammer Actimo XL, mechanische Feder, 3-Punkt-Sicherheitsgurt und hohe Rückenlehne, Kopfstütze - Elektrisch verstellbare Armlehne rechts. - Getönte/laminierte Fenster inkl. Schiebefenster in linker und rechter Tür - Scheibenwischer vorne (doppelt), hinten und Dachfenster - elektronisch gesteuerte Heizung/Lüftung inkl. Klimaanlage und Frischlufteinlassfilter, ausgeschaltet bei offener Tür - Komplette Türen mit Griff, Schlüsselschloss und Luftklappe (links und rechts) - Komplettes Manövriersystem rechte Konsole inkl. Standarddisplay (elektrisch verstellbar), Multifunktionshebel linke Seite. - Verstellbare Steuerung, Lenkradkonsole und Schalterfelder - Ergonomischer Joystick für Ausleger- und Anbaugerätefunktionen - Geschwindigkeitsregelpedal rechte Seite, Bremspedale linke und rechte Seite - Lenkrad mit Lenkradknauf. Sicherheitsübersteuerung für Hydraulikfunktionen (per Code) - Radio, MP3, USB, AUX, Bluetooth, Freisprechfunktion, RDS - 24/12-V-Konverter einschließlich vier 20-Ampere-Steckdosen an den vorderen Kabinenpfosten. 1 x 12-V-Steckdose, 2 x 5-V-USB-Steckdosen und 2 x 24-V-Steckdosen - Kalmar-Lenkachse mit doppelten Drehlagern, mechanischen Seitenanschlägen (±3 Grad) und elektrischer Servolenkung mit doppeltwirkendem Zylinder ermöglicht einen kleinen Wenderadius. - Hochleistungsantriebsstrang...

Condition: good (used), machine/vehicle number: 3055, Year of construction: 2016, load capacity: 45,000 kg, lifting height: 15,100 mm, mast type: telescopic, total length: 11,600 mm, total width: 4,190 mm, operation weight: 70,820 kg, additional equipment features: Front mud guards, Rear mud guards, Centralized greasing system, Automatic Greasing System for spreader and inner boom, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Ijdpfx Ajul Dtpeg Ustb

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3261, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotary table diameter: 1,600 mm, Equipment: rotational speed infinitely variable, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of manufacture: 2011 Travel paths: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Design: Self-rigid machine frame without elaborate foundations. Precision compact roller guides on all axes. Machine column in portal construction, spindle head and saddle made from GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC individual drives, stepless 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast iron, automatic 360°/180° swivel, 64,800 CNC-controlled positions - SK 50, tool pull-in force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick tool clamping CNC Rotary Table: - Ø 1,000 mm, planarity 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Max. swing diameter: 1,800 mm Balancing System: Integrated system for vibration monitoring & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed-location coding, air-blow spindle protection Control: Siemens 840D, mounted swiveling on the machine. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cabinet cooler (two-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication (MQL, Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant changeover - Lubrication: central for guides, spindle grease-lubricated, milling head oil mist Chip Conveyor: Hinged belt, X-axis 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - Single-channel collision monitoring - Protective air on glass scales - Wireless 3D probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary union in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with control panel buttons - Safety glass (18 mm) - Air cleaning unit ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI handheld device with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Itedpow Eb Itefx Ag Ujb Paintwork: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey and RAL 9011 graphite black, silk matte, oil & soda resistant.

Condition: good (used), machine/vehicle number: 3058, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,740 kg, additional equipment features: Hydraulic sliding cabin, Rear mud guards, 30ft autostop, Automatic Greasing System for spreader and inner boom, Fire extinguisher , Radio Control, Front mud guards, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Itodpfxeul Dt Ns Ag Uob

Condition: good (used), machine/vehicle number: 3057, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,860 kg, additional equipment features: Rear mud guards, 30ft autostop, Automatic Greasing System for spreader and inner boom, Fire extinguisher , Radio Control, Front mud guards, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Isdpfxoul Dt Aj Ag Uetb

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos Ijdpfx Agowcldae Ustb

Condition: good (used), machine/vehicle number: 3056, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,940 kg, additional equipment features: 30ft autostop, Automatic Greasing System for spreader and inner boom, Fire extinguisher , Radio Control, Front mud guards, Hydraulic sliding cabin, Rear mud guards, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Itsdpfjul Dtvex Ag Usb

Condition: good (used), machine/vehicle number: 3059, Year of construction: 2017, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,150 mm, operation weight: 70,380 kg, additional equipment features: Front mud guards, Hydraulic sliding cabin, Rear mud guards, 30ft autostop, Automatic Greasing System for spreader and inner boom, Fire extinguisher , Radio Control, Equipment: lighting, Kalmar DRG450-65S5 from Uniktruck Ijdpfxeul Duao Ag Ujtb

Condition: reconditioned (used), Year of construction: 2009, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,500 rpm, workpiece weight (max.): 8,000 kg, overall weight: 13,500 kg, Equipment: rotational speed infinitely variable, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm control iTNC 530 HEIDENHAIN Iodpfjvlzznsx Ag Ujtb table-size 3.230 x 1.050 mm table load 8,0 t spindle taper ISO 50 tool change unit 24 Pos. spindle turning speed range 30 - 3.500 U/min drive capacity - spindle motor 25 kW feed stepless 1 - 5.000 mm/min rapid traverse 10,0 m/min chip conveyor Spiralförderer voltage 380 V total power requirement 35 kVA weight of the machine ca. 13,5 t dimensions of the machine ca. 7,40 x 3,65 x 3,60 m hydraulic power unit 1,40 x 0,50 x 0,60 m 0,45 x 0,70 x 0,85 m - Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed

Condition: used, Year of construction: 2025, lifting height: 15,100 mm, fuel type: diesel, motor manufacturer: Volvo-Diesel, Lifting capacity: 45.000 kg Please contact Sales Team for more information Itodpfox Ifz Aox Ag Ueb

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 45,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 285 kW (387.49 HP), empty load weight: 76,300 kg, drive type: Diesel, Full Container Reachstacker Chassis number: 0 Transmission: Dana TE30510 Condition: New equipment Itedpfx Agow A Txfe Uob Technical condition: New Front tire type: Pneumatic Rear tire type: Pneumatic Description:

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 538518/1, Dear interested party, You will find all the data on the plant in the photos and in the PDF files. The plant can be viewed by appointment. Itodpfjumv Alsx Ag Ujb We will be happy to answer any further questions you may have.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 45,000 kg, lifting height: 15,000 mm, fuel type: diesel, power: 231 kW (314.07 HP), empty load weight: 69,500 kg, drive type: Diesel, Full Container Reachstacker Isdpfx Ajw A Tw Ueg Ustb Chassis number: 0 Transmission: Dana / HVT R2-851 Condition: New unit Technical condition: New Front tyre type: Pneumatic Rear tyre type: Pneumatic Description: