Screw compressor S013035

Kaeser SK25T

Condition: new, Year of construction: 2024, operating hours: 55 h, Exhibit available immediately: Kaeser SK 25 T - 8 bar screw compressor with integrated cold dryer with Controller SIGMA CONTROL 2 Year 2024 Operating hour: 55 h Pressure: 8 bar Nominal power: 15 kW Delivery rate: 2.51m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Rsdounliqepfx Aqueu Visit our store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm Redpfjv E R E Aex Aqueu total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. Rodpsdrc Txofx Aquou We always have a large selection of new and used compressors in stock!

Condition: used, Field of view on the objective at 50 x: 11.2 x 9.2 mm Field of view on the objective at 100 x: 5.6 x 4.6 mm Projection area: 560 x 460 mm Objective stage size: 230 x 165 mm diameter of the glass table: 80 mm Rsdjb Nxl Iopfx Aquou Weight approx.: 230 kg Space requirement: 1030 x 780 x 1800 mm

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW Rodpfx Aqjvx Uvrouou weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: new, Year of construction: 2023, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. Rsdpfx Aqek Dz Dieusu The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. 9 linear axis 1 independent rack with 10 positions Cross-section of outer tools 12 x 12 mm Turret number of stations 12

Condition: good (used), machine/vehicle number: 897, Jaw width: 160 mm Jaw height: 50 mm Rsdpsb Dimvofx Aqueu Clamping width: 280 mm Overall height: 130 mm

Year of construction: 2010, condition: ready for operation (used), One CNC lathe Takamaz X180 available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg. Rjdpotqfq Hjfx Aquou

Year of construction: 1998, condition: ready for operation (used), for material Ø: 6 - 80 mm for bar lengths: 100 - 915 mm Shooting table size: 945 x 800 mm Working height: 1400 mm Rjdodtywwepfx Aqueu height adjustable: +/- 200 mm elec. Connection: 220V Space required: 3420 x 1150 x approx. 1500 mm Weight: about 300 kg

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Rsdpfjtqfq Rex Aqusu