Ride-on combination machine scrubber dryer

Kärcher B 300Ri Diesel

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW Blsdpfxsd Izmaj Agzsd diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: new, table length 2200 mm table width 1500 mm stroke height 1850 mm Bjdoupxwkopfx Agzold weight max. in kg 2000 kg 260 mm total power requirement 1,5 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,45 t dimensions of the machine ca. 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Blsdpfx Agovb Dcaozod Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Year of construction: 2000, condition: like new (used), PADELTTHERM through-hull glow ovens Type: ROH 50 X 15 X 150 - E Circuit diagram no.: 6 - 16 -4. Bp Order no.: 9070/4 Blodpfecn Tr Iox Agzed Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Rated power 32 KW Protection class IP 54 Rated current 58 Amp. max. temperature 1050° C Weight 2250 Kg very little used in a UNI

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm Bjdpfxob A Tcfo Agzjld - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Bodpfx Agsv S E Edszjld

Condition: used, operating hours: 2,572 h, The Tennant M30 increases productivity by delivering exceptional sweeping and scrubbing performance and also improves health and safety. Easy to operate and maintain, it quickly improves the image of your facility by cleaning in a single motion (wet or dry). It also cleans three times longer on one water tank using Tennant's innovative ec-H20 technology that uses up to 70% less water. Blodpfjnyiv Nex Agzjd This Tennant M30 comes standard with: - Complete service, - New battery pack, - Free on-site delivery, - New wear parts and rubbers, - Service and overhaul, - Explanation and instruction, - Cleaning agents, - Brushes and accessories tailored to your floor. Other specifications: - Type: Sweeper-Scrubber, - Condition: Occasion, - Brand: Tennant, - Model: M30, - Sit up or walk behind: Sit down, - Theoretical capacity: 15,860 m²/h, - Side brush diameter: 53 cm, - Scrubbing width: 157 cm, - Mopping width: 150 cm, - Number of brushes (scrub): 2, - Brush type: Cylindrical, - Scrub brush diameter: 30.5 x 122 cm, - Brush pressure (scrub): 193 kg, - Dumpster capacity: 198 liters, - Clean water tank capacity: 284 liters, - Dirty water tank capacity: 360 liters, - Power source: Battery 36V, - Dirt tank emptying: High discharge system, - Maximum dumping height: 152 cm, - Filter area: 7.3 m², - Filter type: Panel filter, - Maximum speed: 13 km/h, - Maximum slope angle: 10%, - Drive: rear wheel, - Filter shaker: Electric, - Weight (excl. batteries): 1,815 kg, - Weight (incl. batteries): 2,449 kg, - Dimensions (LxWxH): 274 x 162 x 147 cm, - Stock: In stock, - Working hours: 2,572 hours, In addition, you can contact Metech for all machine maintenance and reorder cleaning supplies. In addition to this used Tennant M30, we also have new sweeper-scrubbers and used machines available. View our sweeper-scrubbers for more information. Would you like to know more about this Tennant M30? Contact us, we are pleased to tell you all about it.

Year of construction: 1997, condition: good (used), material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm Blodpjha Hdhsfx Agzsd weight: 3.100 kg

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm Bledpfofg E Hmex Agzed total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, Year of construction: 2004, total length: 6,240 mm, Tugger Rofan TPR-10 Drive Diesel Bjdpoxyalksfx Agzjld Year built 2004