Electric 4-wheel forklift

Jungheinrich EFG 320 / Kabine / 2195 Std.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) Hedpfx Aeia Tauokiew - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. Hsdpfx Aewzmcbokisw ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Hodpfx Aksgiwl Dsijw Combined oscillating mortiser and drilling machine. Available immediately

Condition: used, Year of construction: 1990, Motor output 5 kW Hodpfxjwgnz No Akiow Weight 1.500 kg Control cnc

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go - Paint booth wall - fully barred Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: Hsdonbd Rrjpfx Akisw -Riello 40G20 oil burner -Heating time 10 -15 min dkm3db -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t Hsdpfxoh Hrvfo Akijw +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C weight of the machine ca.: Auf Anfrage t 20-foot container Compressor station – sound-insulated container with 2 compressor units 2 units SPX Hankison GmbH Type HHL 450 – a compressed air adsorption dryer (desiccant air dryer) for industrial compressed air systems. It is used to remove moisture from compressed air to prevent corrosion or freezing in machines, valves, or pneumatic systems. SPX Hankison HHL 450 Manufacturer: SPX Hankison Type: HHL 450 Design: Heatless desiccant dryer Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers These units operate with desiccant material (adsorption granulate) that binds water vapor from the compressed air. * Hsdpfx Akeyx Tnrsijw

Condition: new, Year of construction: 2026, functionality: fully functional, The FM300N transport fan is a heavy-duty industrial-grade unit designed for efficient extraction of sawdust, dust, and fine wood waste in production plants and carpentry workshops. With a high capacity of 2530 m³/h and a powerful 1.5 kW three-phase motor, the unit effectively supports woodworking processes, ensuring cleanliness, safety, and smooth operation. The FM300N is a reliable sawdust blower engineered for intensive use and long service life. Key Advantages Extraction capacity of 2530 m³/h – effective contaminant removal even during high-intensity operation 1.5 kW three-phase motor – stable performance under continuous load Universal connection system – one 130 mm inlet or two independent 100 mm inlets Damage-resistant construction – durable metal housing Energy-efficient and low-noise operation – optimized power consumption and improved acoustic comfort Design and Technology The FM300N is built on a stable, welded steel frame resistant to dynamic loads and external factors typical of industrial environments. The high-efficiency aerodynamic impeller is mounted directly on the motor shaft, eliminating transmission-related power losses and ensuring long service life. The unit features two 100 mm suction ports (or one 130 mm port), allowing simultaneous operation of two workstations or connection to large-format machines. The 400 V three-phase motor provides sufficient power and operational stability in industrial facilities. A rotational speed of 2950 rpm guarantees intensive airflow, even during prolonged operation. The entire design has been optimized for easy installation and maximum use of workspace. Precision and Performance The FM300N is a dependable sawdust extraction unit capable of transporting wood by-products generated during machining—from fine sanding dust to heavier sawdust and chips. Its high airflow capacity ensures smooth operation of production workstations, reducing the risk of blockages and limiting the emission of contaminants in the working area. Applications The FM300N is intended for professional environments where durability and efficiency are essential. It can operate as a standalone sawdust fan or as part of an advanced dust extraction system. Typical applications include: carpentry workshops furniture manufacturing plants wooden component production departments workstations with circular saws, planers, spindle moulders, and sanders Standard Equipment powder-coated steel housing three-phase motor 400 V / 50 Hz suction port: 1 × 130 mm or 2 × 100 mm integrated base for stationary installation Optional Equipment bag filters flexible hoses Ø100 mm, Ø120 mm, Ø150 mm Technical Specifications Parameter Value Motor power 1.5 kW Hjdpfx Akevu Afgeijw Speed 2950 rpm Extraction capacity 2530 m³/h Inlet diameter 130 mm / 2 × 100 mm Outlet diameter 120 mm Voltage / Frequency 400 V / 50 Hz Dimensions (L × W × H) 430 × 410 × 450 mm Weight 24 kg

Year of construction: 1999, condition: good (used), IMA Compact MFA / F / 5212 edge banding machine Year of manufacture: 1999 Serial number: 06601 Max. edge banding thickness: 12 mm Min. workpiece thickness: 10 mm Max. thickness of edging material roll: 3 mm Feed speed: 12 m/min Adjustment of the joint guide rail: manual Heating time: 10 min Jointing unit: Yes, with 2 milling units Automatic edging roll magazine: Yes Trimming shears up to: 0.2 - 3.0 mm Solid edge magazine: Yes Preheating of the panel by heating radiator Automatic glue application with glue tank and granulate Cutting saw angle adjustment via program Multi-function unit Rounding unit/corner copying, 2 motors Profile trimming blade Flat trimming blade Buffing unit Unit display, mechanical digital display Control type via control panel Operation: selector switch/push buttons Protective hood Weight approx. 2500 kg Dimensions L x W x H: 6500 x 1000 x 1600 mm Hsdpjia Naqefx Akiow CE marked Technical specifications subject to change

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Hsdpfx Akjzcdn Neiew Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting PLC control Rear table width approx. 1500 mm Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse