Single-disc flat lapping machine

joke EL 600

Condition: ready for operation (used), Year of construction: 2019, total height: 2,797 mm, overall weight: 1,570 kg, This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine. Additional information • Maximum workpiece size: approx. 1344 x 910 x 716 mm • Maximum workpiece weight: 730 kg • Table height: 850 mm • Equipped with vibration damping system • Sensor System: • Articulating head: tilt ±180°, rotation increments 2.5° • Scanning speed: up to 150 points/second • Max. stylus length: 150 mm • Max. stylus weight: 15 g • Min. stylus tip diameter: 0.3 mm • Accuracy (per ISO 10360 standards): • Length measurement error (E₀): 1.7 + L/350 µm (at 18–22°C) • Scanning error (THP): 2.7 µm • Form measurement error (RONt): 1.7 µm • Repeatability (R₀): 1.2 µm • Controller: ZEISS C99L • Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS • Control mode: Motorized / CNC • Interface: Ethernet, USB • Performance: • Drive system: Motorized CNC • Travel speed (axes): 0–70 mm/s • Max. vector speed: 465 mm/s • Max. acceleration: 1.85 m/s² • Scanning speed: up to 125 mm/s • Utilities: • Power supply: 100–240V AC (±10%), 50–60 Hz • Max. power consumption: 800 VA • Typical power usage: 200 W • Compressed air: 6–8 bar, pre-cleaned, dry (ISO 8573-1 Class 4) • Air consumption: max. 120 Nl/min Dcodpfsx D Ngfox Agzjd • Environmental Conditions: • Operating temperature: 18°C–22°C • Relative humidity: 30–60% (non-condensing) • Compliance & Certifications: • Conforms to EC Machine Directive 2006/42/EC • EMC Directive 2014/30/EU • Quality management: ISO 9001:2008 • Environmental management: ISO 14001:2004 • Accredited ISO / IEC 17025:2005 Dimensions Machine Depth 1975 mm

Condition: used, Year of construction: 1985, grinding length 600 mm grinding width 200 mm Djdswd Tx Uopfx Agzscd total power requirement 7,5 kW weight of the machine ca. 2,3 t

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Dcodpfev U A Izex Agzed Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR Dedpjv I Tx Refx Agzjcd MANUALS

Year of construction: 1988, condition: used, Compressor unit type 178 A CD E Dedpfx Aegw Dqpsgzscd Delivery volume 4760 l min 9 bar operating pressure KW 30

Year of construction: 1999, condition: excellent (used), Control: CNC-controlled and manually controlled PC P 2000 MMX-PCI Desktop ATX color screen 15", keyboard CNC-Turbo roughness for WINDOWS TECHNICAL DATA Hard stone test plate (DIN 876) length x width 1200 x 500 mm Accuracy grade 2 Flatness 16,6 µm Weight 250 kg Linear feeder Waveline 60 Basic Probe length 60 mm Resolution 0.014 µm Dcodelxyp Hspfx Agzed Measuring column Wavelift 400 CNC Travel 400 mm Positioning repeatability ˂ 10 µm Device dimension W x D x H 1.8 x 0.8 x 2.2 m Weight 600 kg EQUIPMENT/ACCESSORIES  Complete enclosure with electrically operated roller blinds  hard stone plate 1200 x 500 mm  ISEL-feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wawelift 400 CNC  Tilting unit KEG 60 at the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurements  Instrument table  Emergency stop button on the instrument table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for mounting the hard stone plate  Documentation

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Dodsw I Tt Sjpfx Agzscd Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Dcedow U Ry Nopfx Agzod Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine Dedjhmi Ucepfx Agzjcd This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours

Condition: used, Year of construction: 2017, Technical details: grinding diameter: 280/320 mm grinding length: 750 mm centre height: 170 mm weight of the machine ca.: 22,5 t Dcedpfxsttxg Sj Agzed dimensions of the machine ca.: 4,7 x 3,65 x 3,0 m