Vickers hardness tester

INNOVATEST FALCON 500

Condition: good (used), Semi-automatic spiral binding machine Renz Mobi 500 Very good condition of the device. Semi-automatic device for crimping closed spirals by the German company RENZ: • Device controlled by a touch screen • The fastest change of settings for different work formats in this class of devices via the electronic panel, which is particularly important for small, frequently changing print runs • Setting the spiral diameter in the range of 1/4”-1 1/4” (6.9 -32.0 mm) using a knob Kdolhowdpazoccqnek • Hanger feeder • Quiet operation. The device does not require the use of a compressor. • Working width 105-500mm • Mobile devices, easy to move • Receiving conveyor included • Does not require special operator training 230V power supply Weight: 550kg

Condition: excellent (used), Catalog number 7447 TECHNICAL DATA - max cutting height 150mm - max cutting width 510mm - max saw diameter 450mm - blade bore 70mm - shaft diameter 70mm *from above: Kolhccqeug Ul Renedk - pawls - 2 smooth, slipping shafts - slipping shaft, smooth *from below: - 4 smooth, slipping input rollers - toothed pulling shaft - shaft with saws - toothed pulling shaft - 4 smooth, slipping output rollers - smooth feed speed adjustment - feed motor approx. 3kW - main motor 37kW - diameter of the extraction nozzle 150mm - overall dimensions L/W/H 3900x1750x1500mm - weight 1400kg ADVANTAGES - Polish production - DTR documentation - used multisaw, very good condition Net price: PLN 24,900 Net price: EUR 5,860 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, 20,000 kg 500-volt electric motors and electric motors with gearboxes New, like-new, and used Immediately available Export price: €1.40/kg Kelewca Igshccqnodk More pictures upon request

Condition: excellent (used), Maxcess Fife-500 Web Guiding System Electromechanical web guiding system Sensor Kslhcjvcda Iscqnsdk Manufacturer: Fife Maxcess Type: Fife-500 Web Guiding System as an assembly For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information and call us if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses may therefore still be present. - The item is offered as used, without any guarantee or warranty. - Some of our items have been dismantled from functioning production systems or are unused stock items, - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. - For technical or other queries please contact us at any time. - Appointments for viewing or collection are of course possible by arrangement. If you have any questions or would like to arrange a viewing, please contact us. Thank you for your interest.

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! Kdslhswbknbeccqnjk ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: good (used), Welding rotary table KT 500, with 100mm through hole Load horizontal 500 KG, tilted 250 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W table diameter 700mm height 700mm, width 800mm, length 800mm Weight 155 KG Tilt range stepless electric 0 - 90 speed 0,3 - 2,5 rpm Welding current transmission max. 500 A Incl. hand remote control foot remote control Surcharge: Kelheb U Haveccqnsdk Quick clamping - jaw chuck Diameter 400mm, 530.-€ CE-sign/approval

Condition: new, Year of construction: 2025, You can call us 24/7 for Stationary Crushing and Screening Plant for Sale CONSTMACH stationary crushing and screening plants maximise the performance of your business by providing efficient and high-quality production solutions. These high-tech plants are designed in different capacities and configurations and can be customised according to the type of your material and your needs. With production capacities ranging from 50 to 1000 t/h, these plants can be integrated with various crushing and screening devices thanks to their flexible design. Designed in accordance with the special demands of our customers, stationary crushing and screening plants stand out with maximum performance and low operating costs. The feeders, crushers, screens and conveyors used ensure efficient processing of all kinds of materials. Our stationary crushing and screening plants offer a long-lasting and reliable production environment with their durable structures and superior automation systems. Our automation system, equipped with SIEMENS and SCHNEIDER brand electronic components, allows you to control your operations at the highest level. Our engineering team optimises your costs and protects your investments by determining the most suitable configuration with 3D arrangements. With our stationary crushing and screening plants, you can take your production to the next level and increase your competitiveness. Kdelheud Swxoccqnsk Meet CONSTMACH's stationary crushing and screening plants and discover solutions that meet the exact needs of your business. With their durability, efficiency and customer-oriented design, these plants will make a difference in your business. Offering superior performance and cost-effectiveness, these plants will be one of the most important assets of your business. Contact us for more information and special offers.

Condition: excellent (used), CATALOGUE NUMBER 7590 Technical data: - shaft width 500mm - 3-knife shaft - shaft cover - top length 2360mm - cast iron tops - both tops adjustable Kdelhjv Nhpmsccqnjk - cast iron guide adjustable at an angle - engine approx. 3kW - dimensions l/w/h 2360x1000x1000mm - weight 630kg Advantages: - Italian production - used planer - intended for professional use Net price: PLN 6900 Net price: EUR 1630 Net price calculated according to the exchange rate of PLN 4.25/EUR (with greater exchange rate fluctuations, the price may change)

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. Kslhcowai Nnscqnjdk You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Year of construction: 2021, Condition: new, Low-priced quality hardness tester for the Rockwell C , B , A methods Analogue dial indicator, manual operation, weight loading system, conform to ISO6506, warranty 2 years Rockwell scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, V Test loads: preload 10kgf, main loads 60 | 100 | 150 kgf adjustable hydraulic damping of the weight loading system Adjustable dial indicator, graduation 0.5 HR - Readability 0.1 HR Units Throat 150 mm Test chamber height 240 mm Standard-compliant Rockwell tests according to EN-ISO 6508, ASTM E-18 Kslhccobt Drpjqnodk Machine weight (net) 126 kg Machine dimensions height 765 mm / width 270 mm / depth 555 mm

Condition: repair required (used), Year of construction: 1997, Functionality: fully functional, manufacturer: BECKER Kdslevmhqrehccqnok Type: rotary vane vacuum pump Model: DTLF 500 Year of construction: 1997 Order number: 1475879 NOTE: rotor blades need to be replaced. electric motor ELEKTRO ADDA Speed: 980 min-1 Rated power: 18.5 kW Input power: 500 m3/h Rated pressure: 800 mbar Rated vacuum: 0 mbar Attachment: FC200LT/6 Manufacturer: ELECTRO ADDA Type: MotoR Motor voltage [V]: 380/690v Current [A]: 38.5 Motor voltage [V]: 380-690 Rated speed [rpm]: 970/1170 Weight: ca350kg

Condition: used, Year of construction: 2018, Marel concept 500 labelling machine Kslhccqev Sp Ebensdk - top and bottom labelling machine

Condition: new, Year of construction: 2025, Contact us 24/7 for 500-ton cement silos for sale. Designed for those seeking high capacity and durability, our CS-500 model silo offers unparalleled performance in the industry. With a capacity of 500 tons, this silo provides ample storage space, optimized based on a cement density of 385 m³. The silo stands out with its height of 19,945 mm and a diameter of 6,180 mm, and it weighs 28,000 kg, showcasing its robustness. Our silo is supported by six Ø 273 x 12 mm steel pipe legs. These sturdy legs are reinforced with NPL 80 mm angle iron and 20 mm leg plates. The conical section is strengthened by a 200 mm steel C-channel and ST-37 8 mm metal sheet, enhancing the structure's durability. The silo body and top cover are made from ST-37 metal sheets, ensuring a long-lasting and solid construction. The CS-500 model stands out with user-friendly features, including a maintenance platform, internal access hatch, and an external manhole, offering operational convenience. Our silos are produced following structural analysis and based on approved projects, ensuring reliability and quality. The silo is coated with 1 layer of anti-corrosive paint and 2 layers of topcoat epoxy paint, providing a total paint thickness of 140 microns, offering superior protection against environmental factors. If you are looking for a reliable and high-capacity silo, our CS-500 model is the ideal solution for you. Technical Specifications of the CS-500 - 500 Ton Cement Silo Silo Capacity: 500 tons, 385 m³ (based on cement density of 1.3 ton/m³) Cs3I70Ox8U Silo Height: 19,945 mm Silo Diameter: Ø 6,180 mm Number of Silo Legs: 6 Silo Discharge Diameter: Ø 300 mm Number of Components: 250 Silo Weight: 28,000 kg Silo Leg Material: Ø 273 x 12 mm steel pipe Silo Leg Supports: NPL 80 mm angle iron Silo Leg Plates: 20 mm Conical Section Support Material: 200 mm steel C-channel Conical Section Material: ST-37, 8 mm metal sheet Silo Body Material: ST-37, 8 - 6 - 5 mm metal sheet Silo Top Cover Material: ST-37, 6 mm metal sheet Cqdorenme3 Charging Pipe: 4" steel pipe extending to the silo leg Internal Access Hatch: Present External Manhole: Present Silo Roof Guards: Included Kslhcouflvqjcqnsdk Maintenance Platform: Present Structural Analysis: Conducted for Silos, Production Based on Approved Project Specifications Painting: 1 layer of anti-corrosive paint, 2 layers of topcoat epoxy paint, total paint thickness 140 microns

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - inlet width 550mm - inlet height 220mm - shaft width 630mm - knife length 630mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom - lower shaft motor approx. 1.5kW - toothed pulling shaft from the top - upper shaft motor approx. 1.5kW - vibrating chute - vibrating chute length 4750mm - vibrating chute width 450mm - main motor 45kW Kjlowa Am Hjhccqnjdk - vibrating chute motor 1.5kW - auto reverse - reverse gear - total machine dimensions L/W/H 3200x1700x1400mm - total machine dimensions length/width/height 4750x800x1100mm - weight about 4500kg ADVANTAGES - auto reverse - reverse gear - used chipper, very good condition Net price: PLN 120,900 Net price: EUR 28,450 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, 21.25 m² storage platform incl. stairs, railings on two sides, top edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Supports, stairs, railing posts, cross bracing & dome struts powder-coated in RAL 7016 - Handrail, knee rail, roll-off edge, main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, OK natural & UK white Kdslswah Szohccqnek - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x Chipboard - 01 x Stairs, 37° incline - Approx. 8.25 running meters Railing - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5026,00 € net 5980,94 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Year of construction: 2021, Condition: new, THE classic among the universal hardness testers with swivel system with motorized change between indenter and objective Standard accessories (included in the price): * Hardness testing machine with integrated load cell Load system, optical unit * video measuring system: WINDOWS test software IMPRESSIONS * objetives for 95x and 150x magnification * clamping cap * test table flat Ø 80 mm * Installation and operating instructions * certificate of inspection * incl. action accessories: Kolhjcw Iyhjccqnjdk - ring light for Brinell measurements - ISO / ASTM - certified Vickers and Rockwell indenters plus packaging, transport with commissioning on site plus optional equipment

Condition: new, Discover our selection of robust and precise cycle lathes! Are you looking for a reliable cycle lathe that will increase your productivity? Experience precision and performance with our new conventional lathes with extensive accessories. Our machines offer turning diameters from 400-800mm and turning lengths up to 5m, and are also available as cycle variants. With various models, you have endless possibilities. Some machines are available quickly from stock! Discover our extensive special accessories, such as hollow spindle, chip conveyor, C-axis, and more, which make your lathe even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Kdslod S I Aashccqnjk Trust in our years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! These cost-effective series are available with the following key technical data (further, larger models available on request): KEY TECHNICAL DATA: ZDM Series including 15% and more BAFA subsidy! Turning diameter over bed 400-800mm Turning length 1000/1500/2000/3000/4000/5000mm Spindle bore 80 (opt. 105) mm Workpiece weight up to 2 tons Spindle speed up to 1500 rpm ACCESSORIES: CNC control Siemens 828D, 3-jaw chuck, 4-way automatic turret, and more. Extensive SPECIAL ACCESSORIES, such as chip conveyor, steady rests, larger spindle bore, C-axis, and more, to make the machine even more productive. Further information on this series can be found in the PDF file below! CURRENTLY AVAILABLE NEW STOCK MACHINES with warranty and BAFA subsidy, e.g. - Turning diameter over bed 1010mm, turning length 2m, Fanuc Oi-TF+Manual Guide control, 8-way turret - Turning diameter over bed 800mm, turning length 2m, Fanuc Oi-TF+Manual Guide control, hydraulic chuck and tailstock, 8-way turret - Turning diameter over bed 650mm, turning length 2m, FAGOR 8055i control with 8-way turret - Turning diameter over bed 560mm, turning length 1.5m, FAGOR 8055i, 8-way turret - Turning diameter over bed 500mm, turning length 1.5m, FAGOR and SIEMENS control - Turning diameter over bed 450mm, turning length 1m and 1.5m, FAGOR 8055i or Fanuc Oi-TF, 8-way turret More models available on request. Images show machines with turning diameters of 800mm and 3m center distance and turning diameters of 500mm and 1.5m center distance. The investment amount shown refers to ZDM 500/1000 in basic configuration. Contact us now and discover the world of innovative turning technology! Our service for you: • Consultation and solution finding at your location • Organization of the transport of your machine to your facility • Installation, assembly, commissioning, and operational handover • Financing and examination of subsidies by KFW and BAFA, among others.

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Year of manufacture: 2000 2025 Refurbished Generator: 70 amps, multipulse Control: Mitsubishi - 64 bit CNC Programming station software MultiProg Travel paths (X, Y, Z): 525 x 400 x 450 mm Work container (W x D x H): 750 x 650 x 420mm Workpiece clamping table: (W x D) 730 x 630 mm Electrode changer: 20-way plate changer Accessories: CO2 fire extinguishing system, integrated cartridge filter system Refurbished Kjlhccqev Avg Tjnjdk

Condition: good (used), Year of construction: 2018, operating hours: 718 h, mast type: telescopic, fuel type: hybrid, color: white, General information Field of application: Construction Drivetrain Drive: Wheel Functional Working height: 2.900 cm Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Delivery terms: EXW Max. horizontal reach: 1400 m Transport dimensions (LxWxH): 7x0,8x2 Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS290 * 2018 •⁠⁠718 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height •⁠⁠14 meters horizontal range * 4 meters negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight Kdslhccqstync Senjk •⁠ ⁠Including documents

Condition: excellent (used), Catalog number 7309 TECHNICAL DATA - max cutting height 170mm - max cutting width 510mm - max saw diameter 450mm - blade bore 70mm - shaft diameter 70mm from above: - pawls - 2 smooth, slipping shafts from below: Kdelhccqer H H Uwonjk - 5 smooth, slipping input rollers - pawls - toothed pulling shaft - shaft with saws - toothed pulling shaft - 5 smooth, slipping output rollers - smooth feed speed adjustment - feed motor approx. 3kW - main motor 22kW - diameter of the extraction nozzle 150mm - overall dimensions L/W/H 4300x1600x1520mm - weight 1310kg - Polish production - DTR documentation - used multisaw, very good condition Original photos Net price: 29900PLN Net price: 7000 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

Year of construction: 1988, Condition: excellent (used), Face plate 5256 Diameter 500 mmHeight 100 mm Kolhcjd Tyxgscqnjdk

Condition: good (used), Year of construction: 2017, operating hours: 1,997 h, fuel type: hybrid, color: white, General information Field of application: Construction Weights Empty weight: 6.100 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 3.300 cm Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Delivery terms: EXW Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 7,4x1,25x1,99 Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS330Z Kdslhcjuba I Hjcqnok * 2017 * 1197 working hours * Diesel and Battery * 33 meter working height * 19 meter horizontal reach * 200 kg lifting capacity * Automatic outrigger * Remote control * 6100 kg own weight * Including documents

Condition: excellent (used), Catalogue number 7521 TECHNICAL DATA - inlet width 520mm - inlet height 180mm - shaft width 520mm - shaft diameter 400mm - number of knives 2pcs - sieve dimensions 100x100mm - toothed bottom pulling shaft - lower shaft motor 2.2kW - toothed top pulling shaft - upper shaft motor 2.2kW - feeder length 4400mm - feeder belt width 500mm - feeder motor power 1.4kW - main motor 55kW - dimensions of the receiving feeder length/width 8050x880mm - belt width 600mm - dimensions of the machine with the feeder length/width/height 6400x1900x1840mm - weight about 4500kg Advantages: - German production Kelhcceviubvsqnedk - with a belt feeder: feeding, receiving - adjustable height of the receiving feeder - used chipper, very good condition Net price: PLN 100,000 Net price: EUR 23,510 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), Faceplate Diameter 500 mm Inner diameter 105 mm Height 75 mm Cylindrical 105 mm Kelhccqsc U E Rzonodk Pitch 5 mm 475 U/Min.

Condition: good (used), Year of construction: 2016, operating hours: 601 h, mast type: telescopic, fuel type: hybrid, color: white, General information Field of application: Construction Kdslhccjtxxqwjqnjk Drivetrain Drive: Wheel Functional Working height: 2.900 cm Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Delivery terms: EXW Max. horizontal reach: 1400 m Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS290 * 2016 •⁠⁠601 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height •⁠⁠14 meters horizontal range * 4 Meter negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight •⁠ ⁠Including documents