Cylindrical grinding stones,

Industrie Bitossi Alubit 90 35x35 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Beschrijving Deze Japanse DMG MORI ecoMill 600V hebben wij werkend uit productie overgenomen en is in frisse staat. De CMX 600V (ecoMill 600V) is voorzien van een C-frame constructie (klassieke opbouw) en beweegbare tafel (x-as) wat bedoeld is voor algemeen/all-round freeswerk. Aanvullende opties & accessoires: Dcsdpfx Aqey Dg Euovop Siemens 840D SlimLine incl. 3D-simulatie. PROGRESSLine (weergave van de resterende productietijd en het aantal stuks van een volledig bewerkingsproces). Spanentransporteur Spoelpistool Voorbereiding voor interne cooling. Originele documentatie Gewicht & afmetingen: 400x500x300 cm +/- 5.000 kg

Year of construction: 1988, condition: good (used), Carlo Salvi 1 die 2 blow Dodjhrdmxjpfx Aqvecp Model 780/SV Maximum Cutoff dia.mm: 6,35 Max. Cutoff length mm: 97 Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Condition: ready for operation (used), functionality: fully functional, color: grey, Year of construction: 1988, Aeroplex fluidised bed counterjet mill 400 AFG The plant is fully functional and can be inspected on site. Trial milling can be carried out in advance depending on the material. In 2005, the plant was modernised and converted to load cells. Electrical control system: Simatic S7-300 The plant consists of the following units: 1. Mill 2. Raw material filling unit 3. Air filter Dcodpfx Ajx T Ar Noqvep 4. Electrical switchgear

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Dcjdsfz Anpepfx Aqvop ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2016, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Lightly used Hosokawa Alpine Ventoplex C32V air classifier in very good conditions. Recirculation classifier perfect for fine classification of abrasive products separating a fine fraction from the coarser one to ensure a perfect top cut of the product or dedust it getting rid of undesired ultrafines. It is suited for high yields with low energy consumption. Our classifiers obtain the perfect end product particle design. Our air classifiers allow you to split the product into two fractions, a fine and a coarse one, when a regular sieve can´t achieve this task due to product fineness or other characteristics. This is handy when you need to dedust the product removing the undesired fine dust or ensure a certain top cut separating the oversize coarse material, allowing you to adjust your product´s particle side distribution (PSD) to the required specification. This unit is suitable to process abrasive materials, mainly for the minerals industry. Material of construction: mild steel with wear protection Dedpfxeiuxv Nj Aqvjcp Non pressure shock resistant (NPSR), non ATEX Scope: Hosokawa Alpine Ventoplex C32V with 15 kW motor and frequency converter for classifier wheel, 37 kW motor and frequency converter for ventilator wheel, internal feeding screw 5,5 kW motor with frequency converter, external blower for cooling 3 kW motor

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Dsdpjfzk Ewofx Aqvocp materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Djdpfxsnxk Ixo Aqvocp

Condition: excellent (used), Year of construction: 2019, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, table load: 1,000 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK- 63A, number of slots in tool magazine: 60, tool length: 420 mm, Universal Machining Center Manufacturer: DMG MORI Type: DMU 95 monoBlock Year of manufacture: 2019 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 950 mm Y-axis: 850 mm Z-axis: 650 mm C-axis rotation range: 360° A-axis swivel range: +/- 120° Main spindle: Tool holder: HSK-63A Main spindle speed range: 20,000 rpm Main spindle drive power (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: C-axis Ø 850 x 750 mm integrated into Fixed table 1,000 mm x 750 mm Max. table load: 1,000 kg Max. workpiece dimensions: Ø 1,040 mm (clamping capacity) / Ø 850 mm (machining capacity) Height 590 mm Tool changer: Number of tool pockets: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 420 mm Max. tool weight: 8 kg Chip-to-chip time: 5.9 s Feed rates: Rapid traverse (X/Y/Z): 40 m/min Feed rate (X/Y/Z): 40,000 mm/min Technical features & accessories: Dcjdpfxo Agr Igs Aqvjp - Tool changing system with double gripper - MPC Machine Protection Control - Production package: Chip conveyor with coolant unit 600 l / 160 Gallons, Paper belt filter Internal coolant supply, 40 bar / 23 l/min, through-spindle (AD) External coolant supply, 4 bar – 40 l/min (theoretical pump capacity) Chip flushing in the cabin door (not a standard coolant unit) - Spray gun 3 bar – 40 l/min - Oil and emulsion mist separator, mechanical filter, throughput 600 m³/h - Renishaw PP60 optical infrared probe (OMP 60) (if present) - Blum laser, tool measurement in the machining area - 3D quickSET preparation - Electronic handwheel (if present) Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.

Condition: used, grinding wheel diameter 0 mm power requirement 0 kW following grinding spindles available: 1 Stck. Fortuna FAVS 100 R, 250.250, 12.000 U/min - à 700 Eur 1 Stck. SKF 1033293-1 (ex Hoefler) - à 1200 Eur 1 Stck. SKF 1033293-2 (ex Hoefler) - à 1200 Eur Dcsdpfxod Ig U Rj Aqvsp 1 Stck. SKF 1040329 (ex Hoefler) - à 1700 Eur

Condition: good (used), Year of construction: 1997, machine/vehicle number: 24625, COLD HEADER CARLO SALVI 246/TR 2 Die 4 Blow Max. Cutoff Diameter: 8 mm Max. Cutoff Lenght: 75mm Max. K.O. Lenght First Die: 85 mm Max. K.O. Lenght Second Die: 60 mm Dcjdshn R E Iepfx Aqvjp Max. K.O. Lenght (Punch Side): 10 mm