Automatic bar feeder

Iemca Kid 80

Condition: used, TECHNICAL DETAILS Hfedpfx Asv R Hw Sehnoi - Bar diameter : Ø 5 à 80 [mm] - Bar length : 250 à 1615 mm [mm] - Supply voltage : 400 [V] - Machine weight : 500 [kg]

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) Hedpfxjfbt Sio Ahnefi • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Condition: excellent (used), functionality: fully functional, bar length: 1,615 mm, bar diameter (max.): 80 mm, reverse speed: 1,000 mm/s, overall weight: 580 kg, workpiece weight (max.): 250 kg, The bar feeder was purchased in 2019 and was connected to a DMG Mori NLX 2500 / 700. The bar feeder was hardly used. TECHNICAL DETAILS Connector: Harting Material Cross-Sections Round: 5 to 80 mm Square: 5 to 50 mm Hexagonal: 5 to 60 mm Bar Lengths Bar length: 500 to 1,615 mm Short bar length: 90 to 500 mm Hfsdpfey A Rlpox Ahnji Performance Data Magazine capacity: 250 kg Bar changeover time: 30 s Feed rate: 0 to 500 mm/s Return speed: 1,000 mm/s MACHINE DETAILS Connection voltage: 230/400 V Control voltage: 24 V Power consumption: 2 kW Dimensions & Weight Weight: 580 kg Bar pusher travel: max. 1,710 mm Loading axis height: 905 to 1,252 mm EQUIPMENT Short bar kit Handheld control unit Remote control Safety covering Fixed protective grilles

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA Hedpfx Aev S Su Sehnofi - Model: LT 200-M TwinStar - Year of manufacture: 2006

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Hsdpfxevz Ec Io Ahnofi Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Hfsdpfx Aormkfnshnoi Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 240 [mm] - Spindle speeds : 8000 [rpm] Hfedjuhax Eepfx Ahnei - Spindle power : 7.5 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 6000 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 5 GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] SECONDARY OPERATION - Number of positions : 7 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 56.433 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 V+H - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor - Coolant tank * with high-pressure pump - Number of turning tool holders : 3 - Number of fixed tool holders : 7

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Hfedpfoht Rl Eox Ahnji Manufacturer: Breuning Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: excellent (used), Year of construction: 2008, MAZAK CYBERTECH TURN 4500 M UNIVERSAL 4000 Max. swing diameter: 860 mm Max. machining diameter: 810 mm Max. machining length: 4,052 mm Max. milling speed: 3,000 rpm Max. spindle speed: 2,000 rpm Machine is equipped with: - CNC control: Mazatrol PC Fusion CNC 640MT Pro - SMW 3-jaw chuck, diameter 600 mm - Tool Eye Hsdpfszafdaex Ahnefi - C-axis - NC tailstock - manual steady rest - reinforced coolant pump - chip conveyor, discharge to the side - tool holder package for 12-station turret

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, total height: 2,700 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,985 mm, number of axes: 4, This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details. • Operating hours: 4,500 • Table size: 1200 × 540 mm • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Tool changer: random arm, 30 stations • Coolant: through‑spindle coolant 20 bar, flood coolant • Preparation: 4th‑axis preparation • Control: FANUC Oi‑M Easy Guide; look‑ahead 200 blocks; electronic handwheel; USB port Hsdpeyg Iltsfx Ahnsfi • Other: automatic door opening/closing; 3‑color status lamp; documentation and CD‑ROM • Condition: Good; perfect working condition • Availability: Immediately available Additional equipment • 4th axis: NIKKEN CNC202FA • Chip conveyor • Belt‑type oil skimmer • Air/coolant guns Technical Specification Taper Size BT 40