Four Column Press - Hydraulic

Hidralmac 150 Tonnen Betonpresse

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Iedpsfqpxiefx Ag Ujal Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, fully mobile concrete fuel station Frumecar Fastmix * THE STRESSED GAS STATION * - Year of construction: New - 2-4 chambers with 7-14 m³ capacity - capacity: 14-25 m³-h depending on mixer size - mixer size: 0,5 m³ - 0,75 m³ -1,0 m³ - Concrete software from Siemens with self-service terminal and new barcode method and EC card terminal - concrete discharge conveyor 9m length - Cement silo 32 to. incl. cement screw conveyor - installation, commissioning and training incl. - 2 years warranty - Highest quality plant on the market. All components produced in produced. Electric motors and gearboxes from Siemens installed. Other plant components from the market leader VAM. Input errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or in the purchase contract are decisive. Iaodpfx Agehd I Smo Ujl more construction machines and mixing plants on our website Further information Purpose: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Ijdpfx Aeq U R T Nog Uoal Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Power-on hours: 56,376 Spindle hours: 26,451 Technical Data: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double gripper tool changer - Automatic swiveling milling head - Rotating viewing window - NC rotary table with pallet support - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 Extended manual intervention - Rinsing gun with pump Iaedpfxju Rnluj Ag Uol - Tool breakage monitoring SK 40, mechanical version, range: 63...310 mm / +/- 3 mm - Interval control for chip conveyor - Internal coolant supply switchable from 40 bar to 80 bar

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations. Ijdsg Ezarepfx Ag Usal

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Isdpoq Nyw Ajfx Ag Uoal Year of construction 2008 Power 90KW Main fuse 200A Working pressure 285bar flow rate 165L/min Tank 850 litres The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year Iaedpfx Aoihf R Ueg Usl MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Iaedpfx Agogyy I Aj Usl Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: HL, hydraulic unit for hydraulic punch Isdpfx Asf Tdt Ijg Ujal -Type: DK52 1-6-250P-391K -Motor: Junginger 5.5 kW/1455 rpm -Nominal pressure: bar -Liter output: l/min -Pressure display: up to 250 bar -Pressure accumulator: Hydac 2.5 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 540/630/H1210 mm -Weight: 198 kg

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Ijdpfxjwbuyzj Ag Usal