Parts cleaning system/ultrasonic

Hösel GmbH Solvacs

Condition: good (used), Year of construction: 2002, Storage Carousel, Megamat, approx. 3.04m high, 350kg per tray – used - : Ex-works price: €9,950 (net), for self-dismantling! Dusdpfoxbhlnex Afnsn Manufacturer: Megamat Model: 1568/267/16 Year of manufacture: 2002 Serial number: 16178 Equipment height: 304 cm Equipment width: 388 cm Equipment depth: 205 cm Number of trays: 16 Intermediate shelves: approx. 16 pcs - If yes: Quantity: 64 - Removable? Yes Tray dimensions: Height: approx. 20 cm (approx. 10 cm with intermediate shelves) Width: 325 cm Depth: 60 cm Total load capacity: 5,600 kg Load per tray: 350 kg Imbalance: 1,000 kg Operation: with Kardex Drive and SAP integration Power supply: 3/N/PE 230/400V, 9A, main fuse 16A Condition: good Available: immediately Location: Herrenberg

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Dusdpfemdn Dxsx Afnsn

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Dodpfegpxc Ssx Afnjun Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm Duedehlnzkspfx Afnon column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: excellent (used), Year of construction: 1983, Force: 45 tons Daylight: 205/305mm Table: 700x450mm Ram: 700x360mm Dsdpfx Afjgfvnnonsun Ram adjustment: 50mm Stroke: 10 - 50mm Strokes per minute: 80-400 Requested power: 11 kW Weight: 7.200 kos. Height: 3.100mm

Condition: new, saw blade diameter 300 mm capacity 90 degrees: round 102 mm capacity 90 degrees: square 90 mm capacity 90 degrees: flat 120x80 mm capacity 45 degrees: round 90/80 mm capacity 45 degrees: square 80/70 mm capacity 60 degrees: flat 90x70/85x70 mm Dodpfefg Rlajx Afnjun total power requirement 1,5/2,0 kW weight of the machine ca. 0,135 t dimensions of the machine ca. 0,5 x 1,05 x 1,0 m The versatile professional metal circular saw. Convincing in performance and price. · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Spindle vice with double clamping arm for low-burr cuts · Cone safety clutch to protect the saw blades. · 2 speeds 33 + 66 rpm · Automatic cooling directly on the saw blade · Double bearing for saw head · 24 V safety switch in the handle with restart lock · Length stop, assembly tool · Closed cast, solid cast superstructures · Miter adjustment on operator side machine base (option) ATTENTION: Price is without saw blade!!! (saw blade price EUR 93 / EUR 123)

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, National Machinery 750 S3 Operational - Working 5 FORGING STATION Supplied with control process and soundproof cabin Machine Size: 750 S3 Number of dies and punches: 5 Total heading load (kN): 2730 Number of strokes/min. (min/max): 90 Cutoff diameter: 22 mm. Cutoff length (min/max): 4,75/80 mm. Kickout stroke - die (min/max): 19/100 mm. Kickout stroke - punch: 52,4 mm. Motor size (kW): 55 Dodpetnhp Rjfx Afneun Net weight (kg): 41.500

Condition: good (used), Year of construction: 1993, - TRAUB control TX 8F - spindle passage 42 mm - Working spindle speed: 40 - 4.000 1/min - 4 grooving slides: stroke 60 mm - 8-fold turret - high pressure pump 25 bar - backworking (2 spindles) - bar feeder (3 m) - chip conveyor Duodpfx Afjldd Iqonen

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating Duodpfxjd Hbp Ao Afnjn On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: used, Double-column Eccentric Punching Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Machine No. 88151005 Year of manufacture 1988 / 92 Press force 160 tons Column width 970 mm Column width (lateral) 560 mm Table size 900 x 900 mm Ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/minute Strip width in roller feeder max. 400 mm Motor power approx. 15 kW Power supply 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Semi-automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Switch cabinets for the press and feeder, jointly mounted on a platform next to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Dusdpedzqlvofx Afnsn Press width without feeder 2100 mm Press depth with drive motor 2300 mm Overall press height 4150 mm Net weight of punching press approx. 18 tons For transport, the drive motor is disassembled and the machine is laid on its side. Included: NC Roller Feeder-Straightener ALBA Type GGVHY400 Equipment No. 1405 and 1406, Order No. 910708 (year 1992) - Feeder control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit at the press for material entry height adaptation - Hydraulic unit positioned next to the line - Straightening unit with hydraulic opening and closing Weight of the complete system approx. 24 tons Transport space required: one megatrailer with 3-meter internal height and 13.6-meter loading length Good condition