Mounting cube

Guss 1000/600/H400 mm

Condition: refurbished (used), RA250D oxygen version, oil-free, assembled and filled with Fomblin. Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. Fsdod R Trnopfx Agxegi We currently have several oxygen vacuum pumps in stock.

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Fsdsid Szvopfx Agxsgi Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Fgjdpfx Ajvgh U Rjgxji Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light,

Condition: excellent (used), Welding positioner, Focker Strähler, 8 tons Fjdpef Ezdnsfx Agxogi 8000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable 0.02 rpm to 1.1 rpm Diameter 1500 mm Height to center when tilted 1170 mm Height in horizontal position 1400 mm Length 2400 mm Width 1500 mm Condition: visually and technically flawless, runs very quietly.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Fgjdpforntirex Agxji Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: like new (used), Year of construction: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Spindle speed range 6,500 rpm Spindle taper SK 40 Fedpfx Agjtdfbmoxjgi Tool changer 24 positions Control system Siemens 840 D Total power 20 kW Machine weight 5,500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition: very good

Condition: refurbished (used), Refurbished. 1 year guarantee. Rotary vane pump. Fgodpfxsrta H Te Agxei

Condition: excellent (used), Year of construction: 2024, operating hours: 1,080 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 3,600 mm, total width: 3,000 mm, table load: 300 kg, rotary table diameter: 650 mm, rotational speed (max.): 25 rpm, overall weight: 9,800 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 700 h, coolant supply: 30 bar, spindle motor power: 23,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, The machine was used as a bridging machine because the customer ordered an MT EVO UDS80. This is already his second one. UDS65-5A 5-axis universal machining center with Rotary table with Heidenhain TNC640 - 12,000 rpm hybrid bearing direct drive, water-cooled - Torque 120 Nm (25% ED) - Drive power 23 kW (25% ED) - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with blow-out function Rotary table: - Ø 650 mm - Direct measuring systems in C and A axes General: - 48-position tool changer with dual-arm gripper - Travel ranges X/Y/Z: 620/520/460 mm - Coolant and compressed air gun - Chip conveyor as a scraper conveyor - Coolant system - Electronic handwheel - Work area light IKZ, 30 bar, including paper band filter Fjdpfxszwkwle Agxsgi Heidenhain TS460 for SK40, Workpiece probing system with radio and infrared transmission Heidenhain TT460, tool probing system with radio and infrared transmission for tool measurement Heidenhain KinematicsOpt #48 Machine cover that can be opened, mechanically operated Incl. a large number of – approx. 100 – SK40 holders.

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw Fjdpfxsuprqwj Agxegi center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Fgodpshwt H Aofx Agxoi Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.