All-terrain crane

Grove RT765E-2 ROUGH TERRAIN CRANE + JIB + 2 X WINCH

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been fully cleaned and inspected. The drilling machine features a numerically controlled drilling unit with longitudinal movement (X-axis), adjustment range 0 - 15,000 mm, and an automatic tool changer with HSK A80 interface for 6 tool positions. Thanks to the 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: • Support for profiled and flat steel with guide rail and fixed table, total length 15 m • Mobile drilling unit for longitudinal positioning along workpieces • Horizontal drilling head with single drill spindle • Additional tool storage in the X-axis direction • Clamping system for securing materials • Position detection device • Maximum profile size: 1200 x 1200 mm • Number of drill spindles: 1 • Drilling diameter: 5 - 40 mm • Tapping: M6 - M30 • Drill spindle speed: 180 - 3000 rpm • Holder: HSK A 80 • Tool changer: 1 x 6 For more information, please contact us. Bdjdpfx Aev Iamzjcvsa

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW Bdjdpfx Acehzbipevsa MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm Bjdpfx Acoxiu Dtovsda max. cutting height 170 mm motor 11 kW

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Tyre type front: Pneumatic Tyre size front: 400/70-24 Tyre condition front: 80 - 100% Tyre type rear: Pneumatic Tyre size rear: 400/70-24 Bdjdpfew Eqddjx Acvsa Tyre condition rear: 80 - 100% Description: Hydraulic adapter for Manitou 2550 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, exterior mirrors, joystick, beacon, windscreen wiper, LED. Specifications: - Approval as a tractor with possible trailer operation - 20.0 t with 7-pin trailer socket - Fixed Dieci tool carrier mounting plate with double hydraulic quick coupler operated from the cab for attachments, including hydraulic coupling (Forks require an adapter plate for use with quick-change system). Hydraulic single-lever control unit with proportional simultaneous control (flow-sharing). Close-centre system including pressure relief kit for: - Lifting capacity 3,200 kg - Lifting height 8.65 m - Engine KUBOTA 79.5 kW (107 hp) - Displacement 3,769 cm³ - Emissions standard Tier 4f - Steering modes: all-wheel steering, crab steering, front-wheel steering - Rear hydraulics - 40 km/h - Air-suspended seat - Mounting plate with hydraulically operated quick coupler - Steering control warning light.

Condition: ready for operation (used), functionality: fully functional, Gantry crane Bollegraaf 30 tons, 32 meters span, 10 meters lifting height Bdodpew S Ea Sjfx Acvsa

Condition: used, functionality: fully functional, operation weight: 14,300 kg, Year of construction: 2016, RENTAL The machine offered is available for rent only!!! Prices: Daily rate from €780.00 Weekly rate from €3,200.00 Bedpfx Acjwtq Ifoveda Prices exclude VAT

Condition: used, mileage: 962,877 km, lifting height: 20,000 mm, Year of construction: 2007, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 25.460 kg Functional Lifting capacity: 14.800 kg Identification Serial number: 970090 / 5127349 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Goodyear Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x0x0 Bodpfxjxwim Eo Acvjda Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, operating hours: 1 h, Drivetrain Drive: Wheel Bsdpfx Acsxbxpdsvoda Weights Empty weight: 60.000 kg Functional Lifting capacity: 150.000 kg Identification Serial number: 51508182 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 44500 Transport dimensions (LxWxH): 14.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 Bdsdpfx Aevxbm Rscvja The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Dosing hopper SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Complete electrical installation with control cabinet in container Bdodpfxjufih De Acvoa