Tanker semitrailer

Gofa GOFA Chemie 31.700L 3Kammer Schwallwände TÜV

Condition: used, machine/vehicle number: 5063, Attachment: Used decanter/centrifuge Fpsdpfx Ansddzm Tedji Manufacturer: KHD Model: Full-casing screw centrifuge Type: CP 3-0.1 Machine no.: 5063 Maximum permissible speed: 2950 rpm Inner diameter of drum: approx. 530 mm Drum wall thickness: 12.5 mm Drum material: W 2 Gearbox: internal hydraulic gearbox Hydraulic drive: Rotodiff and pump unit (Viscotherm, Pump Unit C11-25Z/HP) Total weight: 2400 kg Purchase and rental possible.

Condition: good (used), functionality: fully functional, “Steinert NES 125 220 E 5009” for Sale Manufacturer: Steinert Type: NES 125 220 E 5009 Fodexb S Exepfx Andepi Belt widthness: 1.250 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Fodpfer A El Eex Andjpi Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Volume: approx. 1,25 m³ Cutting width: 1.500 mm Fpjdpfenubawsx Andji 4 shafts combined adaptor for excavator and wheelloader

Condition: ready for operation (used), Archive photo: Machine is currently being refurbished; delivery time is 3 months. Sorting machine for separating all non-ferrous (NE) and ferrous (FE) metals. The machine can separately sort out non-ferrous metals; ferrous metals do not need to be pre-sorted. Test sorting using the manual spreading method is possible. The machine will be demonstrated in working order. Sale is without warranty or guarantee. Worldwide commissioning is possible for an additional charge. Fsdpfx Aoiqk Aqendspi

Condition: ready for operation (used), The machine is fully functional, with a new belt and valve maintenance, 128 valves. Fpsdpsw Ufyksfx Andji

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to Fpedpet Rv Naofx Andoi

Condition: new, maximum load weight: 30,015 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.STN L 30 stainless steel tank trailer 30m³ for liquid manure TECHNICAL INFORMATION: External length 9,180 mm * Height (empty vehicle) 3,960 mm * Axle distance 5,000 mm * Rear overhang 3,050 mm * Fifth wheel height 1,320 mm * Tank diameter 2,200 mm TECHNICAL DIMENSIONS: Volume 30.0 m3 * Empty weight 6,045 kg * Axle capacity is 27,000 kg * Kingpin capacity of the fifth wheel load is 12,000 kg * The operating temperature is 80°C * Test pressure (+H bar) 0.5 bar * Total weight 39,000 kg TANK: Cylindrical tank container, with a slope to prevent residual quantities in the tank, made of AISI 304 (DIN 1.4301) stainless steel * Number of manholes 1pc. * Manholes size DN450, 4 x nut tightening with hinged dome cover * Aluminium walkway * Access ladder on the left side of the tank * 1 x 5 M hose holder, large aluminium box open at the top * Straight flange as preparation for cleaning pipe * 1 x 8" pipe with flange at the top of the rear of the tank, for discharge by suction * 1 x 8" pipe with square flange at the front right of the tank, as preparation for a filling indicator * 6" preparation for a ventilation line * Preparation for pressure valve * Preparation for vacuum valve and vacuum DISCONNECTION SYSTEM: A transparent pipe made of hard plastic with a diameter of 4" is included at the rear in order to be able to read the level of the transported goods in the tank from the outside * 1 x 8" plastic filling funnel in front of the suction line at the top of the rear of the tank * Börger FL1036 hydraulically driven pump with carbon steel housing * When discharging with the pump, a 6" Perrot coupling with hook closure, which is used on slurry vehicles, is attached to the outlet line. * The outlet of the outlet line is equipped with 1 manually controlled 6" brass slide valve * At the inlet of the mixing line in the tank there is 1 x 4" pneumatically controlled gate valve. 1 x pneumatically controlled 8" slide valve made of brass at the inlet of the tank suction line * 1 x 6" pneumatic vent valve with brass slide * When unloading with a pump, there is a 6" swivel joint to be able to run the discharge line outlet at the rear of the vehicle from left-right-middle * 2x6" pneumatic slide valve DRIVE: Chassis is made of a special aluminum alloy that offers high quality and high strength * BPW axles 3x9 tons with air suspension and disc brakes * 1st axle can be lifted * Aluminum supports * Tires 385/65 R 22.5" * Aluminum rims * KNORR-ILVL electronic air suspension ECAS OTHER: 1 x bracket suitable for connecting a pump, welded to the frame underrun protection mat in accordance with the regulations COLORS: Color of the chassis MB 7350 Nova gray (glossy) * Color The container RAL 9005 black Painting of the tank in BLACK The photos may show different equipment. The text of the construction description is binding!!! Fpsdpfx Aeun Em Nendei

Condition: used, Year of construction: 2022, operating hours: 289 h, functionality: fully functional, machine/vehicle number: B0201, total width: 2,450 mm, total length: 6,050 mm, total height: 2,700 mm, empty load weight: 9,600 kg, Our FEED VIBRO features a combination of feed hopper, leveling roller, and dosing slide, ensuring consistent material feed. Thanks to the integrated drum magnetic separator with selectable strength, magnetic particles can be sorted. If pure dosing without magnetic separation is required, the magnet system can be deactivated. Fjdpsxrtt Sofx Andopi This module is part of our rental fleet.

Condition: used, maximum load weight: 32,820 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,730 mm, Year of construction: 2024, Equipment: ABS, SCHWARTE-JANSKY stainless steel V2A slurry tanker semi-trailer, 30,000 liters First registration 03/2024 Unladen weight only 6,180 kg BÖRGER rotary lobe pump, output max. 6,000 liters/min., with interchangeable housing shells, design without gearbox Automatic pump shut-off, filling level of the tank can be easily adjusted by the driver Flushing line DN150, with 3 outlets (in front of each baffle and in front of the front floor) 2x baffle plates Manhole cover DN500 Suction funnel 8" at the top rear Hose trays, stainless steel, approx. 6,000 mm long on the left Swivel outlet at the rear in 6" with Perrot coupling Emptying device for the product hose All valves pneumatically operated, including monitoring function Fodpfoy S Npxjx Andepi Valve control with WIRELESS REMOTE CONTROL Complete piping system made of V2A stainless steel SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE 3rd axle: Steerable trailing axle WABCO trailer EBS with RSS stability program Tires 6x 385/65 R 22.5 Saddle height approx. 1,150 to 1,250 mm Crank-operated full-load saddle supports Stainless steel storage box on the left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING; with us, it is also immediately available with a full-service rental.