Underground Loader

GHH LF-6.1

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Hjdpfx Aajt Hw N Hjgsnl Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Hnodpsh Ug Ulofx Aagsl Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Condition: excellent (used), functionality: fully functional, power: 60 kW (81.58 HP), Year of construction: 1988, operating hours: 3,500 h, * 3,500 hours * Caterpillar engine 3204 (60 kW) * Operating weight 11,000 kg * Bucket with teeth 1.15 m³ * Immediately ready for use Hodpfx Ajxz Alcsagsnl

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm Hodpfxjwwzudo Aagenl ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: used, Year of construction: 2004, functionality: fully functional, Amada HFE 220- L Year of construction 2004 Laser height adjustment Hedpjuiwypofx Aagenl Working width 3100mm pressing force 220 tons with many tools

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981 Hnjdpfx Aetycg Seagjl

Condition: good (used), Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine -Manufacturer: Bitzer, Compressor Motor Compressor -Type: BHS 752 -Power: 4 kW / 1450 rpm -Volume flow rate: 28.11 m³/h -Max. operating pressure: 24.5 bar -Dimensions: 640/450/H425 mm Hodpfjguztgox Aagjnl -Weight: 131 kg

Condition: used, Year of construction: 2018, Opportunity to buy an excellent Bystronic ByStar fiber laser with 4000 x 2000 mm working area and 6000W laser output (Dynamix edition F6000). Including: V1 cutting head (first version) NCT zle Changer 64 Pos. Detection Eye Dust extraction system 1 Basic Machine 1.1 ByStar Fiber 4020 Dynamic Edition F6000 1.2 Scope of Delivery 1.3 Safety and Guidelines Hnsdpfjx Tcvnex Aagsl 1.4 Complete Documentation 1.5 Power Cut Fiber 1.6 ByPos Fiber 1.7 Cut Control Fiber 1.8 Scanning 1.9 Swap Table 1.10 Laser Source 1.11 Cooling Unit 1.12 Tank Heater 1.13 Machine Control and User Interface 1.14 Uninterruptible Power Supply 1.15 Condition Messenger 1.16 Maintenance Messenger 1.17 Cutting Plan Editor 1.18 Restart Manager 1.19 System Manager 1.20 Cutting Parameter Assistant 1.21 OPC Interface Cutting 1.22 Handheld Control Unit 1.23 Electrical Connection 1.24 Compressed Air (Machine, Laser Source, Cooling Unit, Dust Extraction System) 1.25 Material Specification 1.26 Cutting Gas 1.27 Environmental conditions 1.28 Structural requirements Immediately available and can be inspected under power upon appointment. Working dimensions: 4000 x 2000 mm Laser output: 6000W Power On hours: 49086h Cutting hours: 18659h

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Hedpfx Asx Dm Dnoagjnl

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Hjdpfxewikn Rs Aagjnl Min. pane size: 250x180mm Gas filling press: Models and triple available