Power Generator PTO Generator 987221

GEKO 30000 ED-S/ZWG mit IT/TN Netzumschaltung

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Gtjdjxcwlaspfx Afnsu Operating hours: 63,000 Including control cabinets Including dry cooler

Condition: good (used), balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Fein, Balancer spring balancer -Load capacity: 1-3 kg -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/200/135 mm Gtjdpfeinwumjx Afnju -Dependent weight: 3 kg/piece

Condition: excellent (used), Year of construction: 1986, Engine lathe, manufacturer VDF HEIDENREICH & HARBECK, type 540 Hamburg, year 1986. In very good original condition, equipped with a 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes, including the top slide. Comes with coolant system, rear chip guard, and machine documentation. Chuck: 315 mm Forkardt Turning diameter: 540 mm Turning length: 1500 mm Spindle bore: 103 mm Spindle speeds: 9–1800 rpm Tool holder: Multifix C Chip protection cover For further details, see technical data sheet. Space requirement: length 3.8 m, width 2 m (with rear wall), height 2 m (with rear wall), weight approx. 3500 kg. Gtsdpfsx Hr Dusx Afnju

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Gtjdjwptfropfx Afnsu Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, overall weight: 22,800 kg, pressing force: 250 t, CNC press brake Manufacturer: Weinbrenner Type: GP250 Machine specification:- Crowning -Matrix displacement -Rear stop type 2 -Front bending aid (removed for transportation) Gtjdpfx Afsr Sxq Rsneu -DNC 900PS control unit All documentation for the machine is available.

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Gtodpelhwr Refx Afnou Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Gtedpfsi Dx Sbsx Afnju

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,990 h, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,900 kg, total length: 7,840 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telehandler Load Centre: 500 mm Mast Type: Telescopic Transmission: Hydrostatic Speed Class: 20 km/h Condition: Operational and fully functional Technical Condition: Good Front Tyres Type: Pneumatic Front Tyres Size: 445/65 R22.5 Front Tyre Condition: 80–100% Rear Tyres Type: Pneumatic Rear Tyres Size: 445/65 R22.5 Rear Tyre Condition: 80–100% Description: The alternative to a mobile crane, wheel loader, or rigid telehandler. The Manitou MRT 2550 Privilege Plus rotating telehandler is the perfect construction machine for the job. It can handle loads of up to 5,000 kg and work at heights up to 25 m. The versatile 3-in-1 machine (telehandler + crane + work platform) provides a wide range of daily applications. Its four-section boom and 360° rotation capability allow for various handling tasks to be completed from a fixed position. Gtsdpex Nz D Nefx Afneu Equipment: - Third hydraulic valve - Work platform pre-installation with radio remote control - Fork carriage PFB/1320 mm - Forks 150 x 50 x 1200 mm - Load backrest - 7'' LCD colour display - Automatic parking brake - Return line - Tyres 445/65 R 22.5 - Reverse warning signal - Rotating beacon - Attachment recognition system - CAN bus control - AdBlue

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Gtodpfx Asw U N Daefnou