AOI

Göpel AdvancedLine

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed Djdpjwp Nv Hefx Adhscn 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m Dcjdpslp Uz Rsfx Adhjn

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Dodpoudk A Hofx Adhscn

Condition: excellent (used), Year of construction: 2013, operating hours: 2,579 h, functionality: fully functional, input voltage: 380 V, We are offering this well-maintained JUKI GKG-GL, KE2070, KE2080, RS800N + Chiller SMT placement line, year of manufacture 2013. The line has low operating hours and was used exclusively for our own products. We are not a service provider; only single-shift operation. The line has been serviced annually by JUKI and is in excellent condition. KE2070 operating hours: 5751 h KE2080 operating hours: 2579 h Due to circumstances, sale only as a complete line, no cherry-picking. Loader and unloader are included, but not the ones shown in the video – instead, units from Rommel will be supplied. Manufacturer: JUKI Model: GKG-GL, KE2070 (5751h), KE2080 (2579h), RS800N + Chiller Year of manufacture: 2013 Machine type: SMT placement line Available from the end of July 2026. We are happy to assist with dismantling and loading by a local specialist company. Dcsdoy Axcvjpfx Adhen If you have any questions or need further information, please do not hesitate to contact us by message or phone.

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg Djdpfx Asyh N Aaodhjcn X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Year of construction: 1991, condition: used, pressure 150 t Dcsdelp U R Djpfx Adhsn passage width 1100 mm stroke 500 mm table surface area 1100x1070 mm ram surface 1100x1070 mm hole in the table 475x450 mm table height 920 mm dayligth 800 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x3600 mm

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Dcjdpfxoylzhlj Adhsn

Condition: ready for operation (used), An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible. Dcjdpfxow Snd He Adhsn

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 410 mm z-travel 520 mm control Siemens type 840 D Tool changer 30 Pos. spindle taper: ISO 40 spindle turning speed range 40-6000 U/min table surface area 840x420 mm Table load 500 kg spindle power 8,5 kW total power requirement 15 KVA weight of the machine ca. 2,7 t Machine has 4 axes The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Dsdpjyqvt Tjfx Adhocn We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm Dsdpfx Aet Hwuiedhjcn total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m