Brush deburring machine

FLOTT BEM 250 Pro (NEU ab Werk)

Condition: excellent (used), Year of construction: 2016, operating hours: 1,395 h, functionality: fully functional, machine/vehicle number: 1400040877,  4-axis (X, Y, Z, A) center,  For economical and efficient machining of aluminum profiles and thin-walled steel profiles,  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and threading take place on a stationary profile,  Smooth machining using all tools,  Simultaneous tool magazine ensures short tool change times and, as a result, optimal machining cycles,  Magazine can be equipped with eight tools, Kfjdpfx Aajuc U S Ns Eja  Windows operating system  Machine equipped with eluCam program  Max. length of machining fields with front machining: 4200 mm  Max. length of machining fields without front machining: 4320 mm  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots),

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. Kfodpfjd Ixbzox Aa Esa OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Kfjdpov Dvhyofx Aa Eoa Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2023, Weight 950 kg Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm Kfsdpfx Ajmdr A Eja Eea diameter knife block 120 mm Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Picture contains special accessories

Year of construction: 1999, condition: good (used), Nail lenght range - 50 - 90mm Kfjdsdmbp Uepfx Aa Eoa Speed - 100 nails/sec. ( frequency regulator ) Management - PLC Simens S5

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg Ksdjfqpxijpfx Aa Ejfa In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: new, Year of construction: 2025, The ERBA EVP-RA 350 vibratory finishing machine features a rising, sloped process bowl floor with integrated separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the built-in drop step. Discharge and separation are carried out via the integrated flap (manual or pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines via its side discharge port. The system can be equipped with a fully automatic PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and long service life, based in part on the hot-cast polyurethane lining of the process bowl. Technical data: - Gross volume: 385 liters - Channel width: 340 mm - Vibration motor power: 2.2 kW - Speed: 1,400 rpm - Inner bowl diameter: 1,200 mm All prices are net, excluding the currently applicable statutory VAT and freight costs. Some images may show the machine with accessories that are available as options and subject to additional charges. If you are interested, please contact us. We would be happy to advise you without obligation. Kjdpfx Aaon Ut Urs Eefa The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, phone, or messaging portal). You will first receive a non-binding offer from us, which will also provide information about our general terms and conditions, legal notice, and your right of withdrawal before any purchase or contract is concluded.

Condition: refurbished (used), Year of construction: 2013, Electrostatic air filter Indusa elstar EL4001 NVAS R/O Kfodpfjfyiqbjx Aa Eoa There are 3 units still available. Air intake is on the lower right, air outlet is on the upper left. The air filters are from 2010–2013 and have seen very little use, as operations switched to a central extraction system in 2014. All filters have been fully overhauled, cleaned, disinfected, and fitted with new internals. The units are in excellent optical and technical condition. Each unit undergoes a 24-hour test run prior to delivery. The elstar series’ thoughtful design, high-quality workmanship, and flexible modular system form the basis of its success among electrostatic air filters. The electrostatic air filter purifies contaminated machine exhaust precisely where it is generated—making the air breathable again! The elstar electrofilter is designed for the separation of oil mist, coolant mist, oil smoke, welding fume, vapors, airborne particulates, oxidized smoke, and aerosols, making it suitable for almost any industrial application.

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Kfodpjd Hmnfofx Aa Esa Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Kodpfx Ajv Dvkzea Eefa Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.