Modular milling cutter hob 7 pieces

Fette Mod.1,75 EW 20°

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Dedpfxsw Rrb He Adhscn Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC Dcodpfjpkyn Rex Adhen

Condition: used, Modular milling cutter Module 8 20 degrees Length 1800 mm Diameter 120 mm Dcedpfx Adodklt Njhsn Inner diameter 40 mm

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Djdpfxjunwd Ts Adhecn Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Documentation for machine Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: new, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for lathes S32. Dsdpfx Adoufgb Iehecn

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine Dodpfxjy A Ngle Adhjcn The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Grinding Machine - 2 machines Max. gear diameter: 800 mm Max. module: 16 Max. gear ring width: 125 mm Number of teeth: 5-150 Spindle speed range: 20-125 rpm Main motor power: 7.5 kW Overall dimensions (LxWxH): 3170x2180x2200 mm Weight: 15 t Video of the machine in operation available! SARATOV 5C276 Straight Bevel Gear Grinding Machine Module, mm: 10 Max. gear wheel diameter, mm: 500 Max. gear wheel cone distance, mm: 250 Max. gear ring width, mm: 80 Min. angle of dividing cone (pitch), degrees: 5 Number of wheel teeth: 10 – 150 Dcedpfx Asum Ez Rodhsn Distance between spindle and machine center, mm: – max. (stock angle 5 degrees) 375 mm; – min. (stock angle 90 degrees) 75 mm Stroke, mm: 100 Slider double stroke, spm: 48 – 400 Motor capacity, kW: 4.0 Machine weight, kg: 8750

Condition: new, The Newpower Generator proudly presents its new NWD110 Soundproof Plus Series. These power units are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. Das Aggregat ist neu, komplett inkl. Steuerung, Dieseltank, Auspuff Batterien, mechanischer Drehzahlregler , AVR, Batterieladegerät , Kühlwasserheizung, Steckdosen, FI Schutz Leistungsschalter. - Verstärkte Schalldämmung - Extra leiser Betrieb - Netzüberwachung, Netz-Einspeisung - Sofort einsatzbereit Technische Daten: Modell: NWD110 Soundproof Plus Notstromaggregat Fawde Motor Newpower Stromaggregat mit Extraschallschutz Motor: Deutz BF4M1013EC G1, 4 Zylinder, Wassergekühlt Generator: Newpower NW/N110 Continuous performance: 80 kW / 100 kVA Maximalleistung: 88 kW / 110 kVA Geräuschpegel (7m): ca. 65 dB Anschluss: 1x5P 125A-, 2x5P 63A -, 2x2P 16A Schuko Steckdosen, FI Schutz Leistungsschalter 5-adriger Anschuss Frequency: 50 Hz Spannung: 400/230 V RPM: 1500 U/min. Steuerung: Comap IL4 AMF8 Baujahr: 2023 (neu) Dimensions (LxWxH): 3070x1130x2150 mm Dodpfx Adenkb Uvohjcn Weight: 2099 Kg Diesel tank: 250 L. (Anschlussmöglichkeit an external Tank) 100% Last l/h 19,4 75% Last l/h 14,6 50% Last l/h 9,9 Additional Kosten 250A automatic switch Shipping: - Ein worldwide Transport incl. Entladung ist gegen Aufpreis möglich - To be able to name an exact freight price, send us a request with your date and your complete address

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm Dcodpfx Adjzc D Enehon No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,9 x 2,5 m dimensions electric cabinet LxWxH: Nr. 1: 1,95 x 0,4 x 1,95 m dimensions electric cabinet LxWxH: Nr. 2: 0,8 x 0,23 x 1,95 m dimensions:: Abluftanlage: 1,4 x 0,7 x 0,55 m Dsdpfx Adjvc An Dehecn Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 69x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *