Low loader semitrailer

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

Condition: used, maximum load weight: 37,575 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 10/2025, total width: 2,540 mm, Equipment: ABS, More vehicles available at Extract from the equipment. Complete equipment details on request. Gooseneck: Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading platform: * Telescopic loading platform with rear bevel approx. 1,000 mm x 8° * Between 1st and 2nd axle, one pair of fixed wheel recesses with covers, approx. 1,610 x 700 x 400 mm (L x W x D) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 4 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs on the external frame for attaching tension straps (LC 2,000 daN) * Incl. 3-piece removable galvanized covers over the wheel recesses – max. point load approx. 3.5 t / piece Axles: * BPW axles and suspension, 2 rigid axles, 3rd axle steering * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tools Tyres: * Tyres 235/75 R 17.5 Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Brake system: * Brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: * HRM metallization (High Resistance Metallisation), complete steel construction blast-cleaned to SA2.5-SA3. Afterwards hot finished with ZINACOR 850 (Zinc 85% - Alu 15%) * High-quality 2-component (2K) single-color top coat in RAL 3002 carmine red Accessories included: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Galvanized extensions, extendable by approx. 230 mm per side * Galvanized folding supports under the rear bevel of the loading platform * A bracket for a beacon at the rear of the trailer * Plug-in aluminium side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H), the rear galvanized stanchions are removable (superstructure length approx. 2,560 mm) * 1 galvanized toolbox, integrated into the beveled gooseneck * Hardwood bumper on the gooseneck rear wall to the loading platform * 3 pairs of WADER container pockets in the loading platform for one 20' (30') or one 40' container * 5 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm on the external frame of the loading platform * Hardwood extension planks, maximum permissible load on an area of approx. 200 x 200 mm up to approx. 3.5 t * One galvanized holder for the extension planks, left and right under the loading platform * Sanded paint layer as anti-slip on the chequer plates, over the kingpin and the loading platform * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light Kodpfoxfx R Asx Aa Eofa * Load pressure gauge for axle load determination including load chart * 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * Storage for max. 7 pairs of plug-in stanchions, approx. 100 x 50 mm, on the front wall * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, incl. approx. 48 mm thick hardwood covering, incl. electro-hydraulic unit. Ramp with hydraulically folding/unfolding ramp sections. Hydraulic lifting gear and hydraulic lateral movement, maximum load

Condition: new, Year of construction: 2023, Sell ​​an alligator shears, metal shears for cables, pipes, profiles Max. cutting force 630 kN Cutting length 600 mm Max opening 280mm hydraulic Pressure 25Mpa full cycles p. minute 7-8×/min. Power consumption 7.5 kW Kjdpfx Aajlhrb Hs Ejfa Weight approx. 1,400 kg Size (L×W×H) 1600×700×1300

Condition: new, maximum load weight: 37,710 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and shortly available vehicles, on our website. Excerpts from the equipment list. Full equipment details are available upon request. Gooseneck: - Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor approx. 30 mm thick Loading Platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Including 3-piece removable galvanized covers over the wheel recesses (W = approx. 670 mm - max. point load 5 t/each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for hooking in tie-down straps (LC 2,000 daN) Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Tyres: - Tyres 235/75 R 17.5 3PMSF – brand of our choice Landing Gear: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake System: - Wabco brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Kfsdpfx Aaew Tpq Rs Eea Electrical System: - Electrical system according to EU regulations - 24 Volt ASPÖCK-NORDIK lighting (ASS3) - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S, and 15-pin sockets in accordance with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Top-quality and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red - Rear section metallized and painted in RAL 9010 (pure white) Accessories Included: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - Spare wheel bracket in front of the front wall - On the galvanized front connection strip, yellow-red air couplings - 4 wheel chocks with holder on the front wall - Mounting for aluminum loading ramps at the rear of the gooseneck - Galvanized folding supports under the rear slope of the loading platform - Bracket for warning beacon at the rear of the trailer - TPMS tire pressure monitoring system in accordance with ECE R 141 - Yellow reflector tape according to EU regulations on the sides, extension, and rear of the trailer - On the gooseneck and rear panel left and right, holder for warning signs each including socket - 1 hardwood bumper on the rear wall from gooseneck to loading platform - Galvanized holder for extension planks left and right under the loading platform - 4 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the rear central beam (LC 10,000 daN) - On the gooseneck, plug-in aluminum side and rear boards, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stanchions are removable (length of the body approx. 2,560 mm) - A tool

Condition: new, maximum load weight: 37,635 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment features. Complete specifications available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length Kfjdpfx Aaoxtc Ubo Eoa Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area * Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each * Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift/lowering valve * Axle tool kit Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data Braking system: * WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with turbine blasting machine after welding * Second blasting treatment with corundum for optimum coating adhesion * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray mist test according to ISO 9227-NSS * Cavity sealing with special wax Including the following extras: * 2-inch kingpin * One

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Year of construction 2008 Power 90KW Main fuse 200A Ksdpfx Aaoq Nyw Ae Esfa Working pressure 285bar flow rate 165L/min Tank 850 litres The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Kfedpfsw Tpq Djx Aa Eja Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, Year of construction: 2024, Price 99000¤ + VAT HMK 102 B Alpha Stage 5, turbo diesel engine 99.8 HP (74.4 kW, 4.4 liters, 4 cylinders Perkins, Road registration possible Luxury glass cabin "Jumbo" of the latest generation, FOPS/ROPS certified with 2 doors Air conditioning and heating CD-MP3 audio device with antenna and speakers Music player ? Bluetooth Street lighting ? 2 front, 2 rear, with flashing light Work lights ? 4 front, 4 rear, independently adjustable Beacon ==> LED reversing alarm Manual mode to activate the gearbox in the event of electronic system failure Tool box, work suit Documentation: user manual, spare parts catalog Servo-assisted, double pedal together or separately, including hydraulic accumulator for effortless braking in engine off Luxurious driver's seat with armrests, headrest, adjustable to the driver's position and weight and seat belt Tilt-mounted steering column TIPshift joystick for front loader 6 forward gears, 3 reverse gears, full automatic/Powershift Two adjustable and tilting panoramic mirrors Windscreen wipers front and rearAutomatic transmission 6 forward gears/3 reverse gears, full Powershift/Autoshift Heavy-duty axles 100% differential lock (rear axle) + limited-slip differential (front axle) Flow-sharing system (enables combined movements)Closed, load-dependent flow-sharing hydraulic system Integrated four-wheel drive (4x4)Front tire 20"Rear tire 16.9-28 12-plyTelescopic arm + Brake line BRAKE LINE VALVE/TELESCOPIC Brake line Double acting hydraulic line MSS (Motion Stabilization System)Auto-locking systemHydraulic joysticks Load control valve (REXROTH-LS (LOAD SENSING)) Variable displacement piston pump With pneumatically suspended seat Retro mechanical displacer Retro hydraulic displacer Price differenceFuel refill pump Selector lever excavator pattern ISO-SAE Rubber pads on stabilizers Safety valves for lifting armSafety valves for loading bucket inclination Safety valves for excavator arm and boom cylinders Overload warning system, EXC. Ksdpewgud Refx Aa Eofa OVERLOAD WARNING SYSTEM, LOADER AUTOMATIC IDLE/STOP Mechanical quick coupler - HMK factory Mechanical quick coupler Hybrid HMK - other brand Mechanical quick coupler Hybrid HMK-JCB Hydraulic quick coupler for 4:1 bucket Standard loader fixed bucket 1.1 m3, 2420 mm width Standard loader 4:1 bucket 1.1 m3, 2420 mm width Forklift forks on the bucket or quick coupler - tiltable Forklift forks on the bucket ==> 6:1 bucket is attached ==> here bucket is attached to forklift Forklift attachment for heavy loads Hydraulic quick coupler cable set (installation costs not included) ==> must be checked Excavator bucket 40cm with teeth and side cutters - HMK Factory Excavator bucket 0.18 m 3 60cm with teeth and side cutters - HMK make Excavator bucket 90cm with teeth and side cutters - HMK make Clearing bucket 150cm without teeth - HMK WestStift (2x pins per bucket) without road approval "Guarantee 1 year or 1,800 hours, whichever comes first, valid for EU area, or subject to confirmation depending on the country of use" CE certificate Subject to prior sale and errors. Images show original consumption data.

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 250 kg, mast type: duplex, Typ: GSR B240PX COMPACT Condition: NEW Year of manufacture: 2025. Working height: max.23.7m Side reach (250 kg): max. 8.25 m Side reach (80 kg): max. 12.3 m Basket load capacity: max. 250 kg Swivel basket: 2 x 70 º Working range: 450 º Aluminum basket dimensions: 1.4m x 0.7m Color: white 4 hydraulic stabilisers Maximum truck load capacity: 3500 kg (B-kat.) All components are exclusively of EU origin. Warranty: 24 months. PRICE 99.500,- € 10% discount TOTAL PRICE 89.550,- € ACTION PROMO PRICE Kfjdpfxsxvx S Uj Aa Eja

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Kjdpoq Nmw Ijfx Aa Esfa

Condition: good (used), Hydraulic clamshell grapple, hydraulic rotary grapple, clamshell grapple, hydraulic grapple, digging grapple -Clamshell grab: bucket width 790 mm -Hydraulic drive: Thumm 708 HZ-4D/SAE -Opening width: 1880 mm -Total height: 2550 mm Ksdjtvb Dqjpfx Aa Eefa -Mounting bolt: Ø 45 mm, dimensions see photos -Transport dimensions: 1880/790/H1800 mm -Weight: 1240 kg