Low loader

Faymonville Multimax F-S43-1AAF

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydr. loading ramps adjustable in width Rsdpfowta Alsx Aa Eol * Air suspension * Extendable * Empty weight: 11,020 kg -----Internal vehicle number: 11010----Subject to errors & prior sale.

Condition: new, axle configuration: 3 axles, Year of construction: 2025, We have all Europe documents!      We can delivery the trailers with FOB-EXW-CPT-CFR-CIF      Redpfx Aoqx Nfgoa Eel If you have an interest please contact with us 

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2025, 3-axle MULTIMAX *PLUS semi-trailer low loader, air-suspended and hydraulically forced steered axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Total weight: 49500 kg 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin turning radius to the rear approx.: 2,100 mm Fifth wheel height when loaded approx.: 1,205 mm Loading area length approx.: 9,600 mm Extendable by approx.: * Loading area width approx.: 2,540 mm Loading height with max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle distance: 1,360 mm *Total weight depends on the fifth wheel load: Yes Special permit required if the country-specific legislation is exceeded: Rodpsizu Ntofx Aa Eel Technical description Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,900 mm, with a bevel at the rear approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading area: Loading area, length approx. 9,600 mm with a bevel at the rear approx. 900 mm x 6°. Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps with a length of approx. 4920 mm and a width of approx. 900 mm. Open grating surface. Ramp tips that can be opened hydraulically. Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load and ramp angle according to technical data sheet: C470319 Maximum incline angle with lowered loading area: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF twin tires. Make of our choice Load index 143/141J (144/144F) Brake system: WABCO EBS-E brake system in accordance with EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Version in accordance with EU regulations. (ASS 3) Metallization Complete HRM metallization (High Resistance Metallization) Complete steel construction shot blasted, then hot-finished with ZINACOR 850 (zinc 85% - aluminum 15%). Paint 6-K final treatment: Complete steel construction shot blasted after welding. 1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-component paint (acrylic) in a single color in RAL colors of your choice, then sealing the cavities with special wax. Rims in silver. Multi-color and special painting for an additional charge. Steel construction: Steel construction made of high-strength fine-grain steel. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welder tested according to DIN-EN 287-1. MAG welding process according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 iFront wall made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM, attached at the height of the outer frame profile. i ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets 24N connection in accordance with ISO-1185 24S connection in accordance with ISO-3731 15-pin connection in accordance with ISO-12098 If your pin assignment differs from the ISO connection standard, please let us know. i "Anderson"

Condition: excellent (used), functionality: fully functional, power: 51.8 kW (70.43 HP), fuel type: diesel, empty load weight: 3,600 kg, maximum load weight: 930 kg, Year of construction: 2012, operating hours: 501 h, Equipment: all wheel drive, cabin, hydraulics, Compact loader Komatsu CK 20-CE specification Year of manufacture: 2012 51.8 kW Komatsu engine 3,600 kg Redpexk Uxyofx Aa Esl - incl. bucket - incl. forks - mechanical quick coupler - cabin - good tracks - immediately operational - original paint - all controls via joystick Sales price: 23,700,-- net

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, Year of construction: 2012, operating hours: 8,895 h, machine/vehicle number: SMC00593, TECHNICAL DETAILS Engine type: Diesel Engine: CAT C9 Engine power: 138 kW Rjdpfx Aaovy A Ths Eel Displacement: 8,800 cm³

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer * First registration: 11/2004 * 3 axles * Air suspension * Gigant axles * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m Rodpfsw Tgl Eox Aa Ejl * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height * Support legs * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 * General inspection valid until: 02/2026

Condition: new, maximum load weight: 40,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles, both immediately and soon available, on our website. Below is an excerpt from the equipment features. The full equipment specification is available upon request. Chassis: * Welded construction made from high-quality steel profiles in lightweight design with through crossmembers * Rear inclined section approx. 630 mm in length and headframe lowered by approx. 100 mm * Excavator arm recess at the rear of the chassis, approx. L 3,750 x W 640 x H 290 mm, between the longitudinal beams with steel floor Wheel recesses: * In the low bed approx. 1,700 mm in front of the first axle a pair of wheel recesses (support/surface under the ramps) approx. H 190 x L 1,550 x W 800 mm, including flat aluminum (climbing aid) * Additionally, between the first and second axle, a pair of wheel recesses approx. H 190 x L 1,080 x W 800 mm, including flat aluminum (climbing aid) * All wheel recesses with aluminum covers and steel checker plate floor Kingpin: * 2-inch kingpin Landing gear: * 2 x 12 t drop legs with aluminium compensating foot Rjdpfx Aasvl N N Hs Esl Rear support: * Two adjustable drop legs Axles: * 3 x 10 t air-suspended axle units, brand SAF, with drum brakes approx. 300 x 200 mm * Automatic slack adjusters * ABS * Centrally-located wheel fixing for twin tyres * Total air suspension lift approx. 200 mm, of which lifting approx. 140 mm and lowering approx. 60 mm, air suspension controlled up/down via air valve with locking function Lifting axle: * 1st axle liftable, operated from the chassis frame Steering: * 3rd axle forced-steered with manual and automatic reverse lock Brake system: * Dual-line compressed air braking system to EC standards with EBS and RSS * Spring actuators as parking brake acting on two axles * Polarity-protected coupling heads mounted firmly on the front crossmember, EC version, without connecting lines to the tractor unit Tyres: * 12 x 235/75 R17.5 – brand of our choice, mounted on 6.75x17.5 rims with offset Mudguards: * As per EC, 1/4 PVC mudguard Floor: * Wooden floor set flush into the outer frame. Above the wheels with steel checker plate cover Load securing high bed: * 4 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Load securing low bed: * 8 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * 4 pairs of folding lashing rings sunken into the chassis frame longitudinal beams, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Stake pockets high bed: * 4 pairs of stake pockets in the outer frame, evenly distributed Stake pockets low bed: * 6 pairs of stake pockets in the outer frame, evenly distributed Removable stakes: * 20 removable stakes made from galvanized tube approx. 80/50 mm, total length approx. 1,000 mm Front wall: * Bolted, fixed steel corner posts filled with approx. 25 mm aluminum hollow sections Plug-in sideboards high bed: * One plug-in board each side in front, made of approx. 400 x 25 mm aluminum hollow section, length approx. 2,400 mm, removable, insertion pocket front in front wall corner post, rear in extra stakes approx. 80/50 mm * Additionally, one plug-in sideboard approx. 400 x 25 mm between the rear extra stakes as rear load securing Ramps: * 2 spring-assisted aluminum ramps, loadable up to approx. 32 t when supported * Ramps secured with

Condition: good (used), Year of construction: 2013, Carrying capacity: 42.000 kg GVW: 10.900 kg Technical condition: good Visual appearance: good Vehicle's outer dimensions: 13,5x2,55x4 Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Euromax Redsxx N Swspfx Aa Ejl Year of build: 2013 Condition: Used Data: First registration: 17.04.2013 Total dimensions LxWxH: 13,50 x 2,55 x 4 m Total permissible weight: 42.000 kg Own weight: 10.900 kg Location: Essen immediately available

Condition: excellent (used), Year of construction: 2008, Year of manufacture: 2008 Empty weight: 13.000 kg Carrying capacity: 35.000 kg Rodpewp N Szsfx Aa Eol GVW: 48.000 kg APK (MOT): tested until 05/2026 Technical condition: very good Visual appearance: very good Please contact Ton for more information Faymonville Multimax STN-3AUB semi-lowloader trailer (2008) Merk: Faymonville Model: Multimax plus Type: STN-3AUB Bouwjaar: 2008 Gewicht: 13.000 KG Totaalgewicht: 48000 KG Special build for platforms and forklifts. Trailer is technically and optically in very good condition. Completely renovated in 2020 Will be sold with Goodyear Kmax T tires (good condition) Trailer is 4 meter extendable Hydraulic ramps and lift deck. Price: € 42.500,- ex VAT

Condition: good (used), Year of construction: 2013, Carrying capacity: 42.000 kg GVW: 10.900 kg Technical condition: good Visual appearance: good Vehicle's outer dimensions: 13,5x2,55x4 Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Euromax Year of build: 2013 Condition: Used Data: First registration: 13.06.2013 Rodpfx Aajxx N S Ds Eol Total dimensions LxWxH: 13,50 x 2,55 x 4 m Total permissible weight: 45.000 kg Own weight: 10.900 kg Location: Essen immediately available