Belt Grinding Machine

FALKEN // CRL Mod. ACO-1, 400 Volt

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm Gbjdoz Dtxcopfx Abiow - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Gedpoittnzjfx Abiebw Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: used, Swiveling aggregate, chain width 10 mm Godovvku Espfx Abiebw Storage location: Nattheim

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Gsdpfspgkmwex Abijbw Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Second-hand machine Second-hand scroll saw from Budget, model BDS 1101 Gbodpfxozk Nv Hs Abijw Motor power: 70 watts Motor speed: 1,440 rpm Availability: at short notice Location: Solingen

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: Gbsdpfx Abexaaf Roijw - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30 - 34 m/sec Gsdpfx Abeirwwpeisbw total power requirement 4 kW weight of the machine ca. 100 Kg dimensions of the machine ca. 1,2 x 0,5 x 0,85 m

Condition: new, Year of construction: 2026, HOFMANN, type AD 635, new surface planer/thicknesser - TERSA cutterhead with 4 knives, - Thickness table adjustment with buttons for rapid or slow feed adjustment, as well as adjustment to within 1/10 mm accuracy, integrated operating hour counter, - Thickness table supported by 4 lead screws and guided on 4 sides - Rubber infeed and outfeed rollers Gedpfxjzyf Tye Abisbw including options: - Motor power 7.5 kW - Continuously variable feed rate of 4-22 m/min, instead of the 2 feed speeds - Positioning control for AD 635 including sensor monitoring via light barrier - Extension table 630 mm, L = 1000 mm - Telescopic push stick

Year of construction: 1994, condition: excellent (used), TECHNICAL DATA: LENGTH OF WORKING ARM: 1600 mm MAX. CUTTING THICKNESS with 130 mm blade: 45 mm MAX. CUTTING THICKNESS with 160 mm blade: 70 mm MOTOR POWER: 0.75 kW – 380 V / 50 Hz NEON LAMP VOLTAGE: 220 V BLOWING DEVICE TO CLEAN THE WORKING AREA: ELECTRONIC, 220 V Gedjr Hmtkspfx Abiebw WORKING TABLE: 1000 x 2000 mm DIMENSIONS: 2400 x 1000 x 1700 mm WEIGHT: 230 kg

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev Gbjdsx Utc Ijpfx Abijw cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Operating manual in English Various turning tools Hand tools The machine can be inspected under power.