Tool and cutter grinder

EWAG WS 11

Condition: ready for operation (used), Ewag WS11 Prsdpfxozwz Ube Adzja

Condition: used, Year of construction: 2013, x-travel 400 mm y-travel 400 mm z-travel 375 mm Prodpfxey Nd U Rs Adzja weight of the machine ca. 7150 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Predpfx Adjw T S Sqszja Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 41 kW (55.74 HP), motor manufacturer: Toyota (1ZS), gearing type: automatic, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 45 mm, tire condition: 100 %, front tire size: 7.00-12, rear tire size: 6.00-9, overall weight: 4,040 kg, color: orange, Equipment: CE marking, full service history, head guard, lighting, pallet forks, sideshift, === MAIN SPECIFICATIONS === Year of manufacture: 2023 Operating hours: 0 h (new) Max. lifting capacity: 2500 kg Max. lift height: 5.0 m (5000 mm) Mast type: Triplex (FSV – Full Free Lift) Free lift: Yes (Full free lift) Fork length: 1000 mm Sideshift fork carriage: Yes (Integrated sideshift, IIA class) Drive: Diesel Transmission: Automatic (Torque converter) Cabin: Open (Overhead guard) Tyres: Solid (SE – Super Elastic) Front tyres: 7.00-12 Rear tyres: 6.00-9 Engine manufacturer: Toyota 1ZS (3-cylinder diesel) Engine power: 41 kW Emission class: Stage IIIA Weight: approx. 4040 kg (with 5m mast) CE certification: Yes === HIGHLIGHTS === Psdpfx Ajynli Sodzsra Triplex mast with full free lift (ideal for indoor use with low ceilings) Integrated sideshift with 3rd hydraulic function Heavy-duty 2.5-ton capacity Solid SE tyres for industrial applications Toyota SAS (System of Active Stability) === CONDITION === Brand new machine – unused. Fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable 2.5-ton diesel forklift equipped with a 5.0 meter Triplex (FSV) mast and full free lift, making it ideal for warehouse operations with limited ceiling height. Powered by the durable Toyota 1ZS diesel engine (41 kW), this model delivers strong performance, high efficiency and long-term reliability. With a rated capacity of 2500 kg at 500 mm load centre and integrated sideshift, the Toyota 52-8FDF25 is perfectly suited for logistics, construction and industrial material handling. Equipped with solid SE tyres and Toyota’s SAS safety system for maximum operational stability and safety. Fully inspected, CE certified and ready for immediate deployment. Spare parts and professional support available upon request. === DELIVERY === Crane loading available upon request. Flexible worldwide shipping options available. Transport professionally handled by Collé Rental & Sales.

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Predpfxexyllvj Adzoa Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: like new (used), Thermoforming machine Stainless steel Compact and easy to use Prsdpfxsxtp I Ie Adzja Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Prsdpfoxrcnljx Adzja

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Psdpewya A Sofx Adzsra Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 - Drive system: Conventional - Grinding diameter [mm]: 315 - X-axis travel [mm]: 800 - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Pedovu U Itjpfx Adzora Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter Prodpfxeq N E U Ae Adzja lifting capacity max. 1 Tonne auf 5,3 Mete Number of working hours 270 h electrical ja