Surface Grinding Machine - Horizontal

ELB-Schliff Super Rubin 020 NC-K

Year of construction: 1993, condition: good (used), Built in: 1993 Size: max 350 x 440 mm min 146 x 103 mm Size trimmed: max 310 x 420 mm min 140 x 100 mm Product thickness: max 70 mm min 3 mm Speed: max 6.600 c/h Equipment: • infeed belt • automatic infeed with integrated pre stacker • electronic counter Bcsdodycmdjpfx Af Esu • external knife changing device • 2 set of knives • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table size extensions • 1 set of quick change cassettes standard size • 3 sets of cutting sticks

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Bcjdpedyah Sefx Af Esu Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Bcsdpfx Afsvx Nmfj Eju Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Forklift is provided.

Year of construction: 1960, condition: used, Surface grinder with magnet 250 x 135 400 Volt power 1,8 kw Bcedpfx Aeiuz Tgef Eou

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Bcedpjt Hwziefx Af Eju Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: good (used), Year of construction: 1992, 1,0 St. gebr. Flachschleifmaschine Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Baujahr: 1992 Verfahrwege: Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Steuerung: UNICON Bsdpei Ra Tyjfx Af Eocu Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Bcedoxv A I Tjpfx Af Eou Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: used, max. grinding length: 300 mm max. grinding width: 150 mm Bcedor Nyatspfx Af Eeu table movement - longitudinal: 2 - 20 m/min grinding plate rotations: 3000 Upm electrical connection: 380 V, 1,1 kW space needed: 1500 x 1100 x 1750 mm weight: 920 kg

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Bodpfxshclffs Af Ejcu Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Bcjdpfx Afjwudhuj Eju Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.