CNC bending machine - order machine

Dr. Hochstrate SBM Typ 6000 x 3

Year of construction: 2020, condition: new, Transport systems Blsdpfofz U S Ejx Afmsp Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t Bodpfx Ashqqnzofmjlp DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bedpfxjgu N Als Afmelp Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1050 x 90 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment Bledpohzq Dbefx Afmop digital display Sheet metal width 1050 mm Sheet metal thickness 3.3 mm max. Sheet metal thickness for pre-bending 3.0 mm Roll length 1050 mm Roll diameter 90 mm Smallest bending diameter 130 mm Weight 475 kg Dimensions L-W-H 1750 x 800 x 1130 mm Motor: 1.1 KW Equipment: Top and bottom rolls, electrically driven Top roll can be pivoted out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center Bedpfjzru Nzsx Afmelp for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Usable length 6400 mm Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Bsdpfx Aoxlcp Nsfmjlp Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Bjdpfxsx Ebzde Afmelp Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Bedpohzcg Nofx Afmslp Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Year of construction: 1980, condition: good (used), strip width: max. 1.650 Boded Ha Hmjpfx Afmelp strip thickness: max. 3 mm blade shaft Ø: 165 mm speed: max. 150 m/min

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: Blodew U U Udepfx Afmop - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller