Transformer

diverse

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Fsdpfx Ajztpxmea Dogf

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules. Fsdpfxowqb Scj Aa Degf

Condition: used, lot (ca. 25 Stück) verschiedener cutters und Fräskombinationen vorwiegend für MEC Vorschub oder ohne Markierung. Fgjdjzryn Ajpfx Aa Dsf Technical data: - Markierung: Ohne oder MEC - Bore: 40 mm - Weight: ~100 kg

Condition: used, Lot of 10 Used Industrial Pumps – Various Brands & Sizes We offer a complete lot of 10 used industrial centrifugal pumps, available from our warehouse in Rotterdam, The Netherlands. The lot consists of various pump configurations and sizes, including several pumps with stainless steel pump housings, large flange connections, and heavy-duty electric motors. The pumps come from an industrial environment and are offered as one complete lot. Lot details: Quantity: 10 pumps Condition: Used Various sizes and capacities Various electric motor sizes Several stainless steel pump housings Flanged inlet/outlet connections Complete pump/motor assemblies mounted on base frames Suitable for industrial applications The pumps have not been individually tested by us and are therefore offered in their current condition. Location: Rotterdam, The Netherlands Delivery: Ex Works Rotterdam, loaded onto buyer’s truck Payment: 100% payment in advance Fgsdpsztraaefx Aa Djf Terms of sale: The complete lot is sold “as is, where is”, without warranty or guarantee. No claims or returns will be accepted. Additional photographs and individual pump/nameplate information can be provided upon request. Preferably sold as one complete lot.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Fgsdpfx Aaod Nw Tto Dof Main motor power 15 Cv

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Complete container system consisting of 24 units (20ft), manufactured in 2023 and in very good, well-maintained condition. The system was purchased in 2023 and is ideally suited for construction sites, accommodation, office, or social spaces. Composition of the 24 containers: • 1 × sanitary container • 1 × utility container with 2 showers and 2 partitions • 7 × living double containers (total of 14 units) each with its own wet room • 10 × office containers, most recently used as an open-plan office Fgsdpfx Aeza Ahvea Def Dimensions per container: 6,063 × 2,450 mm, interior height 2,500 mm. Location: Bad Dietzenbach. Collection or transport from the location. We will gladly provide you with further photos and detailed information – a sale in smaller quantities is also possible upon request. Technical data: Number of containers: 24 units (20ft) Sanitary container: 1 unit Utility container: 1 unit (2 showers, 2 partitions) Living containers: 7 double containers (14 units) with wet room Office containers: 10 units (most recently used as an open-plan office) External dimensions (per container): 6,063 × 2,450 mm Interior height: 2,500 mm Year of manufacture: 2023 Condition: very well maintained Location: Bad Dietzenbach

Condition: good (used), Various suction manifolds, suction distributors Fgedpfxotp Hpbe Aa Def Only suction bell C is currently available; details can be found in the photos. Suction bell C: 140 euros The parts can be viewed on-site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse; see "other offers from this seller."

Condition: good (used), Year of construction: 1993, ELB surface grinding machine Year: 1993 Magnetic table size: 1500x550 mm Fgsdjygtiwjpfx Aa Def With automatic downfeed With wheel dresser Paper band type coolant tank Lots of grinding wheels

Condition: good (used), Our Services: - Repair factory for transformers to 63 MVA / 110 kV Fjde Swr Eopfx Aa Dsgf - New transformers Oil / cast resin - Newly reconditioned warehouse transformers / - Rental of transformers and stations - 24 h emergency service - Recycling / Disposal of Transformers - Accessories for transformers - Training / Expertise - Conversion of Oeltrafos on environmentally compatible Esterfilled - Certification: ISO 9001, OHSAS

Condition: used, Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt systems for bottles and crates Additional title: Reusable bottles; manufactured between approx. 1971 and 2016 Fgsdszhl Hpspfx Aa Djf Nominal capacity appr.: 12000 Fl/h Formats: 0.5 l Euro and NRW, 0.33 l Giesinger; crown caps Features: Uncorker; Unpacker; Crate washer; Bottle washing machine; Empty bottle inspector; Filler and capper; Labelling machine; Date coding; Fill level/label/cap inspector; Packer; Palletising system

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Fgjdpsur H I Njfx Aa Dsf Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, Bolts, hex bolts, flange nuts, hex nuts, collar nuts, washers, washers -Washers: Washers, various sizes 276 kg -Sizes/number: Ø10.5 to Ø31.5 mm see photo parts list -Price: complete Fsdpfsirnwxox Aa Dogf -Total weight: 276 kg

Condition: used, Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, screw-on filter -Filter elements: hydraulic oil filter, fuel filter 478 pcs. -Type: Different types from different manufacturers Fgodpfx Aen R Tnaoa Djf -Price/tax: complete -Transport dimensions: 1200/800/H780 mm -Total weight: 236 kg

Condition: good (used), Year of construction: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U: the universal switchgear for industry and utilities Modular medium-voltage switchgear for solar power distribution Switchgear: Manufacturer: Horlemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Fsdpfx Aenfu Dyea Dogf Busbar: AL 50 x 10 mm Weight: approx. 620 kg Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV IP: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1 s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast Resin High Voltage: 10 kV Low Voltage: 400-230 V Circuit: Dyn5 Year of Construction: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The switchgear is pressure-relieved via a pressure-relief chamber in the lower part of the switchgear panel. Documents: Test Report Circuit Diagram Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Air filter, filter element, filter cartridge, screw-on filter, engine air filter, compressor filter, air filter element, air filter insert -Filter elements: air filter 120 pieces -Type: Different types from different manufacturers -Price/tax: complete Fgjdpfxspbig Aj Aa Dsf -Transport dimensions: 1200/800/H900 mm -Total weight: 151 kg