Lathes - CNC

DAEWOO PUMA 2000 LSY

Year of construction: 2002, condition: excellent (used), GILDEMEISTER LATHE CTX 420 V6 SIEMENS 840 MATR. 2260000551 YEAR OF CONSTRUCTION 2002 SIEMENS 840 NUMERICAL CONTROL Gedpfemv H Dxsx Admjtt C- and Y-axis WITH 12-POSITION MOTORIZED TURRET RADIAL VDI 40 EQUIPPED WITH: 1) THROUGH CYLINDER DIAMENTRO 66 2) SELF-CENTERING CHUCK AUTOBLOK MOD. 250-66 BHD ON THE MAIN 1) AUTOBLOK SELF-CENTERING CHUCK MOD. 175/52 BHD ON THE COUNTER SPINDLE 1) CHIP CONVEYOR 1) 5-BAR COOLANT PUMP 1) WORKPIECE UNLOADING ARM TRUNCATED FROM BAR

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Gtedpfsv Drigox Admst Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: good (used), Year of construction: 2019, Machine has 1500 spindle hours DMG Mori CLX 350 V 4, year of manufacture 2019, control DMG Mori Slim Line / Siemens Shoptrun, travel X/Z 185/540 mm, Gtjdpfx Aexy Hyzjdmjt Y-axis travel 80 mm, 12-position turret, live tooling, C axis, Tooleye tool measurement, three-jaw chuck KNCS 225/66, collet chuck, VDI 30 tool holder, high-pressure cooling 12 bar, tailstock, chip conveyor, prepared for bar feeder,

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Gtedour Hfzepfx Admot Fanuc 310is controller

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, Gtedpfsxv Svmox Admjt sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: used, Year of construction: 2016, 1000 mm 550 mm 500 mm Gtsdpfx Adst Abwyomet Siemens828D 36/36/30 m/min 24000 mm/min 1100 x 502 mm 12000 U/min 24 Stück BT 40 6,5 t - Commissioning: January 2017! - with Siemens828D including Shopmill - Flat top chip conveyor - Spindle with 12,000 rpm, SK 40 - Internal coolant supply up to 30 bar - Tool magazine with 24 places

Condition: good (used), Year of construction: 2008, HWACHEON HI- TECH 200B CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B YEAR 2008 CONTROL FANUC O i-TB SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS Gjdjt Urwhopfx Admett MACHINE WEIGHT 4,500 kgs PLUS RENISHAW PROBE PARTS CATCHER TAILSTOCK SWARF CONVEYOR MACHINE MANUALS MACHINE IN GOOD WORKING ORDER

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Gjdpfefu Ivzox Admjtt Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: Gtodpjxx Tcmefx Admjt 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Speed 5,000 min-1 2 x 12-way turret with driven tool Turret 1 with Y-axis Part collection device Belt filter system Chip conveyor Gsdpswh U D Hefx Admett Bar loading magazine IRCO Profimat