Vertical CNC working centre

CMS Ypsos

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm Bsdpfswu Tu Dex Aa Uscw 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: excellent (used), Year of construction: 2008, The condition of the machine is excellent, it has performed only 14078 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time He works in a welding and cleaning line It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: dehydration vents, grooves venting, holes in colored profiles drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) The center has its own transport of frames from the welder to the cleaner PLC control, NC User-friendly visualization Bsdpjm Ak R Usfx Aa Uecw

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. Bcsdpfx Aaetvpilj Uew We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). We also have a number of single point welding machines for steel wires.

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Bcodpfjf Ncadsx Aa Uew Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table

Condition: used, Year of construction: 2013, operating hours: 1,631 h, Equipment: * Operating hours: 1,631 * Cab * Ditching bucket * 1 shovel * Well-maintained machine * Immediately ready for operation Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! Bcedpjundr Djfx Aa Usw We continually offer attractive financing options at special low rates. If interested, we are happy to prepare an individual offer for you! Trade-in of your commercial vehicle or construction machine is welcome. If a new TÜV inspection is desired, we will gladly provide an offer through our partner workshops. Please note: our offer does not generally include a new TÜV inspection. Delivery of your “new” commercial vehicle is possible via our external partners for an additional fee. The information provided in advertisements, online, price tags, and images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment may need separate verification. Subject to prior sale and errors.

Year of construction: 2020, condition: excellent (used), 2 cats EK DMR Bcjdpfxstu Nmdo Aa Uew

Condition: excellent (used), Knuth UFM 2 universal milling machine Technical data X-axis travel (manual) 800 mm X-axis traverse path 750 mm Traverse path Bedpfx Aajnfu Rij Ujcw Y-axis 300 mm travel Z-axis 400 mm table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45 Cone of horizontal spindle SK 50 Drive Main motor power 4 kW motor power in Z axis 0,75 kW feed motor power 0,55 kW cooling pump motor power 0,09 kW Coolant pump capacity 25 l/min Dimensions and weight dimensions 1900x1720x1750 mm weight 2100 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2000, For Sale: AXYZ 4010 CNC Router (Year 2000) – Made in Canada, Reliable & Versatile We are offering a pre-owned AXYZ 4010 CNC Router, manufactured in Canada, from the year 2000. Known for its durability, precision, and versatility, this CNC router is ideal for various cutting, engraving, and milling applications. It has been well-maintained and remains in good working condition, making it a cost-effective choice for businesses looking to enhance their machining capabilities. Specifications & Features: Work Area: 1220mm x 2540mm (48" x 100") Table: vacuum table Spindle Type: 2x High-speed router spindle Control System: AXYZ proprietary CNC control Drive System: Stepper motor-driven for precision movement Material Compatibility: Suitable for cutting wood, plastics, aluminum, composite materials, and more Software Compatibility: Works with standard CAD/CAM software Manufactured In: Canada Condition: Used, in good working order Key Benefits: Canadian Quality: Built to high manufacturing standards for reliability and longevity. Precision & Efficiency: Capable of intricate cuts and engravings with high accuracy. Versatile Applications: Ideal for signage, woodworking, prototyping, and light metalwork. Cost-Effective Investment: A budget-friendly alternative to purchasing a new CNC router. Bcsdpjvzagusfx Aa Usw This AXYZ 4010 CNC Router is an excellent addition for workshops, sign-making businesses, and fabrication shops seeking a dependable machine at an affordable price.

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable Bsdpfx Ast Ea Tfsa Uecw - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Bcsdpepcibmofx Aa Ujw