Surface grinding machine, precision surface grinding machine, surface grinder

BRAND (Schweiz) FS 735

Condition: good (used), Year of construction: 1982, functionality: fully functional, type of input current: three-phase, MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Ffodpfx Aefqmx Tsfnsu Additives tank.

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Ffjdpfx Ast Hwziefneu Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Ffedpfsh Eulgox Afnsu

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Fedew T S Sqjpfx Afnefu Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Tools Ffjdownd Dpspfx Afneu 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Fedpfx Aerz Nfljfnsfu Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Fsdpfx Aewcfgbefnofu Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Fodpsd Ev Upsfx Afnefu Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 663015, Walter Helitronic Mini Power Production 5 Axis CNC Tool & Cutter Grinder Universal tool and cutter grinder (CNC controlled) Made by Walter, model Helitronic Mini Power Production, s/n663015, year 2000 Description: Suitable to manufacture and regrind metal and woodworking tools of all kinds. Run with 1 micron filtration system, so the machine is very clean. Specifications: • Longitudinal traverse (X-axis) 350 mm, • Vertical traverse (Y-axis) 200 mm, • Cross traverse (Z-axis) 470 mm, • Rotary table swiveling range (C-axis) +/- 200°, • Work head ISO 50, center height (with / without worktable) 145 / 190 mm, • Max. diameter of workpiece 100 mm • Max. length of workpiece 270 mm • Max. dia. of grinding wheel 150 mm • Peak performance 11,5 kW, grinding spindle motor 9kW,speed 0 - 9500 rpm, • Connected load approx. 25 kW (460 volts 3ph / 60 Hz), • Dimensions w x d x h = 2600 x 2550 x 1970 mm, weight approx. 3950 kg, color grey RAL 7035 / grey RAL 7043. Accessories: • Control HMC 500 Windows XP Upgrade • Includes: 2021 Ebbco Filtration & Chiller unit Model PMF-MWF5-623-P-40K capable of filtering & chilling up to 2 grinders. 40,000 BTU Chiller & filtration up to 1 Micron. • Booster Box Upgrade option along with a spare Booster Box as well that could be used as a backup or for up to 3 other Walter machines. Value of each booster box is $10,000 a piece. • Stepless speed control, probe, pneumatic workpiece clamping • Fire extinguishing system • Mist Extractor • Oil collecting pan, 2 grinding wheel flanges • Complete set of Manuals Software: • Tool Studio Version 2.1 Standard & Steptools • WWM Software Condition: • New Y axis Motor & Ball screw Installed 2021 • New Spindle Installed 2021 • New Electrical cabinet air conditioner Installed 2021 • All new encoder & motor cables for A, C, X, Y & Z axis Installed 2021 Fsdpfeu Ez Husx Afnofu • Currently in production producing very accurate & consistent tools. Can be viewed under power • We have all of the shipping bracket, so the machine will be safely secured for shipping. • We can load onto a flatdeck for shipping for $900. We can also provide shipping & crating quotes if you would like.

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm turning speeds:9-6750 1/min table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U Fsdpfst U Rm Iox Afnofu bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min spindle cone:SK 40 column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)