Second-hand machinery for sale (2,431)

Condition: used, Year of construction: 2004, DMG DMC 1035V Vertical Machining Centre with Heidenhain iTNC-530 Control. Serial No. 28860011522 (2004), Table Size 1200 x 600mm, 24 Position ATC, Spindle Taper CAT40 Dksb Eowakmnob S T Rel Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: reconditioned (used), Year of construction: 2011, operating hours: 59,693 h, Functionality: fully functional, laser power: 2,700 W, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, controller model: Sinumerik 840D, TECHNICAL DETAILS X-travel: 2,585 mm Y-travel: 1,280 mm Control: Sinumerik 840D Power and Capacities Laser power: 2,700 W Max. sheet thickness: 8 mm Max. punching force: 180 kN Max. workpiece weight: 230 kg Dkjb Eb Sowhpu Hj T Rol Travel speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X+Y): 108 m/min Stroke sequences Punching (E = 1 mm): 1,000 rpm Marking: 2,800 rpm C-axis (punching / tapping): 330 rpm Tool technology Linear magazine: 21 tools with 2 clamps MultiTool: 5/10-station (max. 230 Tools) Tool change time: 0.3 – 3.2 s Mounting: hydraulic Mono-tool holder, 360° rotation for all tools Laser technology Laser source: TLF 2700, RF-excited (CO₂) Laser control: DIAS 3 Cutting head: 5" lens + 7.5" lens Features: APC distance control, lens monitoring, programmable cutting gas pressure Functions: HI-LAS, SprintLas, ContourLas, AutoLas Plus, MultiTool, thread forming, marking/fast beading Punching technology Punching head: hydraulic, 360° rotation Length compensation/lubrication: automatic MACHINE DETAILS Space requirement (L x W): 8,000 x 7,165 mm Height: 2,710 mm Weight: 16,000 kg Operating hours On-time: 64,320 h Laser operating hours: 59,693 h Beam operating hours: 21,394 h EQUIPMENT - 3 clamps - Cooling unit - Extraction system - Part chutes / ejection cylinders (500 x 500 mm, sensor-monitored) - MultiTool - Multi-beam light barriers - Hydraulic quick-release system - Extraction system and compact dust protection device against scattered radiation on the cutting head

Condition: used, Functionality: fully functional, loading space length: 9,120 mm, Former container hall, floor space approximately 150 m², consisting of seven container shells, lined with sandwich panels on the inside and partially equipped with electrical installations. Already dismantled into individual containers with the following scope of delivery: five 30-foot high-cube shipping containers without side walls, dimensions: LxWxH approx. 912 x 245 x 290 cm, one 30-foot high-cube shipping container with one side wall, dimensions LxWxH approx. 912 x 245 x 290 cm, and one 30-foot high-cube shipping container halved with one side wall, dimensions LxWxH approx. 912 x 120 x 290 cm. Dob Eb S Tjv Invws Rekl

Condition: used, X/Y/Z 800/800/1,000mm, B-axis 360degrees / support circle 900mm, A-axis 270degrees, clamping plate 460x460mm, spindle 18,000rpm, feed X/Y/Z 60m/min, max. tool weight 12kg, 52-pos tool magazine, CNC SIEMENS SINUMERIK 840D sl, 400V 50Hz 31kVA, LxWxH, approx. 6,100x2,000x3,500mm, weight, approx. 12to the indicated price corresponds to the starting bid! hammer price plus 18% buyer's premium, plus 20% VAT, plus handling fee Dkob Ebevf En Eo S T Rsl

Condition: used, 30A, 3x230V, cables included Dsb Eb S Towdh H Te Rekl

Condition: used, Daycare container facility consisting of a total of 65 containers on two levels, each with approximately 500 square meters of floor space, with a staircase, external stairs, kitchen and sanitary facilities, and a gas tank outside. Frame: Welded steel construction made of wood and rolled profiles 2-component zinc phosphate primer, primed Dkjb Eb Sov N D Sqo T Rol 8 container corners for transport, assembly, and coupling Stackable design Roof structure: Roof skin made of galvanized profiled sheet metal, 0.75 mm thick, 35 mm rib depth, ventilated Storage on profiled steel girders (welded to the frame structure) Gutters with 4 downpipes, NW 60, internal Roof load capacity: 150 kg Floor structure: Floor crossbeams with inserted subfloor made of galvanized flat sheet metal, 0.55 mm thick Cement-bonded particle board, waterproof, laid and screwed onto profiled steel longitudinal girders Exterior cladding: Galvanized profiled sheet metal, 0.55 mm thick, 10 mm rib depth Riveted to a galvanized support structure Insulation: Thermal insulation according to the Workplace Ordinance, fire protection class A2 according to DIN 4102 Roof: 80 mm thick mineral wool, thermal conductivity 0.40, U = 0.527 W/m²K Exterior walls: 60 mm thick mineral wool, thermal conductivity 0.40, U = 0.632 W/m²K Floor: 80 mm thick mineral wool, thermal conductivity 0.40, U = 0.450 W/m²K Ground floor: 22 containers type FC 605 3 containers type FC 635 1 container type FC 5435 3 containers type FC 7335 1 container type FC 7835 1 container type FC 5405 1 container type FC 3805 1 container type FC 3835 Upper floor 23 containers type FC 605 4 containers type FC 635 1 container type FC 5435 3 containers type FC 7335 1 container type FC 7835 Please follow the link to see the current bid and participate in the auction.

Condition: used, Year of construction: 2007, DMG DMC 1035V Vertical Machining Centre. Serial No. 15425021864 (2007), Table Size 1200 x 560mm, 20 Position ATC, Spindle Taper CAT40 Dkeb Eowakhxjb S T Rjl Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 54,710 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS X-axis working range: max. 2,550 mm Y-axis working range: max. 1,250 mm Control: Rexroth IndraMotion MTX Travel speeds X-axis: 100 m/min Y-axis: 60 m/min Simultaneous (X and Y): 116 m/min C-axis and stroke sequences C-axis punching: 330 rpm C-axis tapping: 330 rpm Max. stroke sequence punching (E = 1 mm): 1,200 rpm Max. stroke sequence marking: 2,800 rpm Tool technology Linear magazine: 22 tools with 3 clamps Number of tools when using MultiTool: 22 – 220 Tool change time: 0.3 – 2.8 s Laser Laser power: 4,000 W Laser type: CO₂ laser TruFlow 4000 Lens: 170 mm C-axis rotation: 360° Laser control: TASC Dkjb Eb Sswhpbte T Rol Functions: Thread forming, MultiBend, MultiTool, deburring, and rolling technology Punching Punching force: 220 kN Punching head: electro-hydraulic Tool rotation: 360° Pressure clamp: programmable (active / passive / repositioning) MACHINE DETAILS Dimensions (L x W): 8,000 x 6,700 mm Height: 2,500 mm Weight: 24,100 kg Operating times Control operating time: 58,842 h Laser operating time: 54,710 h Beam operating time: 15,518 h EQUIPMENT - 3 Clamping clamps - Slag cone detection - Flap for laser parts 500 x 500 mm with sensor - 2 good part containers for punched and laser parts - Chip container - Ejection cylinder for laser parts - Quick-change device for cutting head - Punch slug extraction - Adaptive stroke calibration - Programmable hold-down device (active/passive/repositioning) - Tool length compensation - Active die - Parts conveyor belt at punching and laser station - Chip conveyor with tilting container - Blow-out device for small parts - SheetMaster with suction frame (36 suction cups, Y-axis 400 mm, V-axis 170 mm) - Skiving suction cup with vacuum sensor - Automatic clamp closing - Sheet thickness gauge for double sheet control - GripMaster with scrap skeleton tilting pallet (2,500 x 1,250 mm) - Double unloading cart - Parts conveyor belt Punching station - Parts conveyor belt, laser station - Storage interface - Table extension - Brush tables - Various safety devices

Condition: used, type: Ariane 8060, built: 2003, mobile, total length: 3m Dob Eb Sjwdh H Ho T Rekl

Condition: used, Year of construction: 2011, GF Agie CHarmilles Mikron VCE 600 Pro Vertical Machining Centre with Heidenhain iTNC-530 Control. Serial No. 1033618 (2011), Table Size 700 x 500mm, Spindle Taper CAT40, 24 Position ATC, 10,000rpm Spindle Djb Eb Sewai Drs T Rskl Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, total length: 6m Dsb Ebewdh Hyj S T Rokl

Condition: used, Year of construction: 2012, GF Agie CHarmilles Mikron VCE 1000 Pro Vertical Machining Centre with Heidenhain iTNC-530 Control. Serial No. 1033618 (2012), Table Size 1000 x 560mm, Spindle Taper CAT40, 24 Position ATC, 10,000rpm Spindle Dkebswaiytj Eb S T Rel Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, total length: 6m Deb Eowdh Htob S T Rskl

Condition: used, Year of construction: 2013, Mazak Quick Turn Nexus 250-II MY CNC Lathe with Mazatrol Matrix Nexus 2 Control. Serial No. 247344 (2013), Tooleye, Parts Catcher, Tailstock, Swarf Conveyor, Kitagawa B120 3-Jaw Chuck, Cleanmist CM500 Filtration Dkob Eb S Tewaixij Rel Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, total length: 6m Dkob Ejwdh Hmsb S T Rol

Condition: used, Year of construction: 2008, GF Agie Charmilles Mikron UCP 600 Vario 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. TBC (2008), 10 Pallet Changer System, 30 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dkob Eb Sewaaf Tj T Rjl

Condition: used, total length: 6m Dkobewdh Hge Eb S T Rol

Condition: used, Year of construction: 2015, GF Agie Charmilles Mikron HPM-450U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.37.00.587 (2015), 10 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Dksb Eswaafaob S T Rel Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, total length: 6m Dkob Eb Sswdh Hae T Rel

Condition: used, Year of construction: 2016, GF Agie Charmilles Mikron HPM-450U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.37.00.619 (2016), 10 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Dsb Eewaabujb S T Rekl

Condition: used, type: 700A, 380v Dkjb Eewdh E Njb S T Rjl

Condition: used, Year of construction: 2017, GF Agie Charmilles Mikron Mill E 500U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.125.00.0011 (2017), 7 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe Dkob Ebewaaa Dj S T Rel Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, type: 45-2, built in: 1991, total dimensions: 10.5m x 1.50m Dksb Eb Sowdh E Ao T Rjl

Condition: used, type: CE1000-2, built in: 2020, total dimensions: 3.5m x 2m Dksb Eb Sowdh Eve T Rel

Condition: used, type: Commercial 106, including Full space punching plates and metal racks, platform and 2 metal cabinets accessories. (incl. automatic waste removal via conveyor belt), 6mx2.5m (without platform), 400V, year of manufacture: 2008 Dkobewdh Epo Eb S T Rol