Second-hand machinery for sale (2,363)

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: FN587504, Year of construction: 2018, operating hours: 8,085 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, Full functionality according to FEM-4.004 Serviceable tires with at least 70 % tread depth Forks and lifting chains with a maximum wear limit of 30% Driver's seat and seat belt as good as new New paintwork in original colors and with original stickers TECHNICAL DETAILS Drive type: Gas Lifting capacity: 2,500 kg Lifting height: 4,700 mm Load center of gravity: 500 mm Mast type: Triplex Fork length: 1,150 mm Dsbjt Dah Hsvara Tsut MACHINE DETAILS Operating hours: 8,085 h Overall height: 2,200 mm Dead weight: 4,111 kg Front tires: Solid rubber - non-marking Rear tires: Solid rubber - non-marking EQUIPMENT - Sideshift - Load protection grille - Front work lights - Rear rotating warning light

Year of construction: 2016, operating hours: 11,480 h, Condition: excellent (used), Functionality: fully functional, fuel type: gas, machine/vehicle number: FN524842, Conversion to sideshift or other attachments possible. - repaired and tested according to FEM4.004: UVV inspection up to date - workshop tested - optically professionally refurbished, as good as new - charger included TECHNICAL DETAILS type of drive: gas load capacity: 4500 kg load center: 500mm Operating hours: 11480 h Mast type: Duplex Lifting height: 3500 mm Fork length: 2000 mm MACHINE DETAILS overall height: 2500 mm Djbvaei Hlrmsra Tout dead weight: 6845kg Driving power: 59,0 kW EQUIPMENT Attachments: sideshift Special equipment: working lights front & rear , StVZO Front tires: Solid rubber Rear tires: Solid rubber

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,529 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, workpiece length (max.): 1,280 mm, workpiece width (max.): 2,585 mm, sheet thickness (max.): 8 mm, TECHNICAL DETAILS Dsbjum Udbevara Tjut Control: Siemens Sinumerik 840 D Laser power: 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching force: 220 kN Compressed air connection: 7 ± 1 bar MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Machine operating time: 38,585 h Laser switch-on time: 21,529 Cutting time: 3,547 h

Condition: refurbished (used), Year of construction: 2017, operating hours: 100 h, Functionality: fully functional, feed length X-axis: 294 mm, feed length Y-axis: 211 mm, feed length Z-axis: 144 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Condition: Refurbished in 2022, with new print head Operating hours since refurbishment: approx. 100 h Certification: CE certified Print specifications Build space: 294 x 211 x 144 mm (X, Y, Z axis) Layer thickness: 0.032 mm Resolution: 800 x 900 x 790 dpi (X, Y, Z axis) Print modes: HD / UHD Material options VisiJet® M2 Armor M2G-CL: clear, flexible, ABS-like (HD + UHD) VisiJet® M2 ProFlex M2G-DUR: clear, flexible, polypropylene-like (HD + UHD) VisiJet® M2R-GRY: opaque, gray, rigid (HD + UHD) VisiJet® M2R-WT: white, rigid (HD + UHD) VisiJet® M2R-BK: black, rigid (HD + UHD) VisiJet® M2R-CL: clear, rigid (HD + UHD) VisiJet® M2R-TN: high contrast, rigid, dental (HD + UHD) VisiJet® M2 EBK: opaque, black, elastomer (HD) VisiJet® M2 ENT: transparent, amber, elastomer (HD) VisiJet® M2E-BK70: opaque, black, elastomer A73 (UHD) VisiJet® M2S-HT90: transparent, heat-resistant up to 90 °C, biocompatible (UHD) VisiJet® M2S-HT250: translucent, amber, heat-resistant up to 250 °C (UHD) VisiJet® M2 SUP: Support material MACHINE DETAILS Duebvaevtl Nxjra Tst Weight: approx. 211 kg Power connection: 230 V, 16 A, 50 Hz Data connection: Ethernet TCP-IP, USB port EQUIPMENT - Refurbished with new print head - Easy Clean System from 3D Systems - Additional build platform - CE-certified

Condition: good (used), Year of construction: 2007, Functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 864 mm, turning diameter: 432 mm, spindle bore: 76 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Turning diameter over cross slide: 762 mm Turning length: 864 mm Turning diameter: 432 mm Tool turret: 12-position, VDI40 Spindle bore: 76 mm Spindle speed: max. 3,400 rpm Djbeul Uvhjvara Teut Spindle speed: min. 30 rpm MACHINE DETAILS Total height: 1,900 mm Total length: 2,200 mm Total width: 3,300 mm EQUIPMENT Tool probe Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, operating hours: 12,000 h, Functionality: fully functional, machine/vehicle number: 044238, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, 3D coordinate measuring machine TECHNICAL DETAILS X-axis: 800 mm Y-axis: 1000 mm Duebvasvmxywera Tst Z-axis: 700 mm Accuracy: 0.8 + L /450 Control: WPC2030 Software: WM, Quartis X3 FREEFORM Hand control: Wenzel HT400 with table and PC Probe head: PH10M Probe system type: TP20

Condition: ready for operation (used), Year of construction: 1972, Functionality: fully functional, turning diameter over cross slide: 620 mm, spindle bore: 85 mm, center width: 5,000 mm, spindle speed (max.): 1,800 rpm, TECHNICAL DETAILS Speed range: 9 – 1,800 rpm Motor power: 15 kW Spindle bore: 85 mm Chuck diameter: 500 mm Working area Turnover over bed: 620 mm Turnover over support: 320 mm Center distance: 5,000 mm MACHINE DETAILS Machine weight: approx. 10 t EQUIPMENT - 2 axes digital display Dsbvevurinoara Tout - Face plate - 2 lynettes - Steel holder - Rapid traverse - 3 lattice boxes Accessories

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, feed length Y-axis: 200 mm, feed length Z-axis: 335 mm, travel distance X-axis: 400 mm, spindle speed (max.): 1,890 rpm, TECHNICAL DETAILS Drilling and milling head Milling head swivel range: ± 90° Drilling and milling capacity Cutter head size max.: 100 mm Drilling capacity steel (S235JR): 30 mm Continuous drilling capacity steel (S235JR): 26 mm Shank cutter size max.: 25 mm Electrical data Drive motor power: 2.2 kW Supply voltage: 400 V Mains frequency: 50 Hz Horizontal milling table Length: 750 mm Width: 320 mm Distance vertical spindle - horizontal milling table min.: 75 mm Distance vertical spindle - horizontal milling table max.: 410 mm T-slot size: 14 mm Number of T-slots: 5 T-slot distance: 63 mm Distance horizontal spindle - horizontal milling table min.: 70 mm Distance horizontal spindle - horizontal milling table max.: 400 mm Max. load capacity: 285 kg Vertical milling table Length: 830 mm Width: 250 mm T-slot size: 14 mm Number of T-slots: 2 T-slot spacing: 63 mm Djbvou Nh Dnoara Tjut Coolant system Coolant pump Drive power: 95 W Travel (manual) X-axis: 400 mm Y-axis: 200 mm Z-axis: 335 mm Travel (automatic) X-axis: approx. 310 mm Y-axis: approx. 160 mm Z-axis: 295 mm Vertical spindle Projection: 100 mm Spindle holder: ISO 40 DIN 2080 Speed range: 50 - 1,890 min-¹ Number of speed ranges: 12 steps Tightening bar: M 16 Quill stroke: 120 mm Max. load: 1,100 Nm Feed speeds X-axis: 10 - 600 mm/min Y-axis: 10 - 600 mm/min Z-axis: 10 - 600 mm/min Electrical connection Total connected load: 4 kW Motor(s) Rapid traverse X-axis Drive motor power: 0.375 kW Rapid traverse Y-axis Drive motor power: 0.375 kW Rapid traverse Z-axis Drive motor power: 0.375 kW Dimensions and weights Length: approx. 1,239 mm Width/depth: approx. 1,168 mm Height: approx. 1,900 mm Weight: approx. 1,400 kg EQUIPMENT With digital 3-axis position display DP 700 from NEWALL, inverter drive of the feed axes, control panel with integrated joystick for feed settings, electric feed limit switch-off, ball screw in all axes, central control panel with digital position and speed display, solid cross table with 5 T-slots, coolant device, machine lamp, manual central lubrication.

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 181612, Machine with high torsional rigidity for heavy-duty machining of steel and cast parts TECHNICAL DETAILS Control system: MAZATROL 640M NEXUS Travel X / Y / Z: 800 / 800 / 800 mm Rapid traverse: 60 m/min C-axis rotary table: 3,600,000 positions Spindle speed: 10,000 rpm Distance spindle nose to table: 150 - 950 mm Table size: 500 x 500 mm Load capacity: 1 t Tool length: 500 mm Number of tool positions: 60 Tool holder: SK-50 Tool weight: 30 kg Tool diameter: 125 / 250 mm Tool change time: 3.5 s MACHINE DETAILS Space requirement: approx. 7 x 3 x 3.5 m Weight: 14.6 t Nominal connected load: 76.68 kVA High-pressure cooling IKZ: 70 bar Chip conveyor: Mayfran Consep 2000 Dujbvarajufigaj Tot

Condition: good (used), Year of construction: 1999, operating hours: 9,188 h, Functionality: fully functional, machine/vehicle number: 1092 000010 3, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 6,000 rpm, The bid obliges the buyer to pick up the machine on time on March 4, 2025! TECHNICAL DETAILS Control: MillPlus Dusbvarjvxrazoa Tjt X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Spindle speed: 6,000 rpm Tool holder: SK 40 Operating hours: 50,819 h Spindle hours: 9,188 h MACHINE DETAILS Machine weight: approx. 5,500 kg Floor space: 3,500 x 2,500 mm Cooling lubricant: KSS

Condition: good (used), Year of construction: 2005, operating hours: 13,917 h, Functionality: fully functional, machine/vehicle number: 11590000083, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Bidding obliges the buyer to pick up the machine on time by the end of February. The machine can be viewed under operating conditions until February 6, 2025.  TECHNICAL DETAILS x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Control type: Heidenhain iTNC 530 Spindle Max. spindle speed: 12,000 rpm Tool holder: SK40 Tool changer Available: yes Tool positions: 32 MACHINE DETAILS Space requirement: 25 m² Duobvaraevu A S Hj Tst Loading dimensions (L x W x H): 3.2 x 2.3 x 2.7 m Weight: 9.6 t Operating hours (as of week 45/2023): 45,746 h Spindle hours (as of week 45/2023): 13,917 h EQUIPMENT - Chip conveyor - External coolant system - 50 x SK40 tool holders

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 97-X1286, travel distance X-axis: 850 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Control CNC system: FANUC 160M X-axis: 850 mm Y-axis: 650 mm Z-axis: 700 mm Spindle Spindle mount: BT50 Spindle speed: 10,000 rpm Spindle cooling: High pressure 30 bar (1/2 spindle cooling) Tool storage capacity: 80 places Table & pallets Table size (working arch diameter): 850 mm Pallet size: 600 x 600 mm Parting angle: Continuous B-axis Maximum load capacity: 1,200 kg Pallet changer: 6 stations Rapid traverses Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min MACHINE DETAILS Total weight: 19,000 kg EQUIPMENT - Chip conveyor Dujbvarsv Dhq Tsa Tet - Smoke extractor - CE marking

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Sheet thickness - max.: 6.4 mm Pressing force: 220 kN Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis travel: 2,000 mm Y-axis travel: 1,250 mm Positioning speeds Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Simulation positioning speed: 108 m/min Positioning speed rotary axis: 360 °/s Duobsvura Hsvara Tjt Smallest programmable path dimension: 0.01 mm or 0.01° Tools Tool stations: 15 tools Tool change time: 1.5 - 6.5 s MACHINE DETAILS Machine dimensions: 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,080 h, Functionality: fully functional, machine/vehicle number: 2390012, travel distance X-axis: 200 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 425 mm, spindle speed (max.): 17,500 rpm, number of slots in tool magazine: 184, tool length: 300 mm, tool weight: 10,000 g, Equipment: chip conveyor, System consists of the main machine SW BA 442 and 2 robots (M-10iA + M-20iD)! Including equipped tool magazine with extended capacity! TECHNICAL DETAILS Control: Siemens 840D SL Axes: 4 axes Change pallet: 2 swivel axes with 4 mounts each Spindle distance: 200 mm X-axis: 200 mm Y-axis (change position): 500 mm (775 mm) Z-axis: 425 mm Feed drive Design: three-phase synchronous motors Distance measurement (X, Y, Z): direct, absolute Rapid traverse speed X / Y / Z: 55 / 70 / 70 m/min Acceleration X / Y / Z: 8 / 8 / 12 m/s² Forces Peak force (X, Y): 15,000 N Peak force (Z): 12,000 N Nominal force (X, Y): 10,000 N Nominal force (Z): 7,000 N Accuracy Position tolerance (X, Y, Z): Tp = 0.008 mm Workpiece holder Design: Double swivel carrier (Q axis) with two directly driven NC rotary axes (A/U axis) Swivel time (0/180 degrees): 3.5 s Maximum asymmetrical load: 500 Nm Repeatability (at Ø 500 mm): < 0.006 mm Rotary axes (A/U axis) Maximum dimensions of fixture and workpiece: Ø 550 mm x 1,030 mm Maximum fixture and workpiece weight: 450 kg Peak torque: 870 Nm Nominal torque: 440 Nm Maximum speed: 50 rpm Angular acceleration: 3 / 6 / 12 U/s² Parting accuracy: ± 5'' Tangential moment: 3,000 Nm Spindle Arrangement: horizontal, side by side Design: motor spindle, liquid-cooled, AC synchronous technology Main spindle Ø: 40 mm Spindle lubrication: oil minimum quantity lubrication Tool system Interface: HSK-A63 Tool clamp nominal pull-in force: mechanically operated, > 18 kN Wear limit: 16 kN Setting dimension: 10.5 ± 0.1 mm Pneumatics: cleaning air, planar contact control Cooling lubricant: central, emulsion, oil, < 80 bar Minimum quantity cooling lubricant: aerosol, < 5 bar Speed and power Speed range: 1 - 17,500 rpm Ramp-up time: 1.2 s Power: 4 x 32 kW at 4,200 rpm or 40% ED Nominal power: 4 x 25 kW at 4,200 rpm Torque: 4 x 72 Nm at 40% ED Nominal torque: 4 x 55 Nm Tool magazine Change system: pick-up Tool management: fixed location coded Capacity: 182 tools (4 x 46) Tool diameter with/without free neighbor: 150 / 80 mm Tool length: 300 mm Tool weight: 10 kg Maximum total tool load: 720 kg Average chip-to-chip time (n < 10,000 min⁻¹): 3.0 s MACHINE DETAILS Installation space (W x H x D): 4.38 x 5.00 x 7.00 m Machine weight in operation: 22,000 kg Debvajvt Tyrsra Tout Transport weight: 14,500 kg Measuring surface sound pressure level (DIN EN 12417:2007): ≤ 75 dB(A) Switch-on time: 34,823 h Spindle time: 14,080 h Electrical connection data Connection voltage: 3 x 400 V, 50 Hz (earthed) Connection type: TN-S or TN-C network Total connected load: 123 kVA Rated load factor (RDF): 0.6 Back-up fuse: 160 A gG (5 s) Coolant supply Chip conveyor: Knoll make Coolant supply/filter system: Knoll make, type 800K-1, year of manufacture 2016

Condition: good (used), Year of construction: 2000, Functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 1,500 mm, turning diameter: 400 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, number of slots in tool magazine: 40, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! TECHNICAL DETAILS Control: Mazak Fusion 640 MT Mazak Turning diameter: 400 mm turning length: 1500 mm Turning diameter over bed slide: 390 mm Turning diameter over bed: 610 mm Spindle speed: 35 - 3500 rpm Spindle bore: 88 mm Tool holder: KM 63 Tool magazine: 40 positions Chuck: 3 jaws, Kitagawa B -15 (400 mm) MACHINE DETAILS Total power requirement: 48 kW Dobvjucty Seara Teut Space requirement: approx. 5.4 x 2.0 x 2.9 m Weight: approx. 9600 kg EQUIPMENT - Chip conveyor - Tailstock

Condition: good (used), Year of construction: 2000, operating hours: 50,542 h, Functionality: fully functional, machine/vehicle number: 01160005891, spindle speed (max.): 5,000 rpm, travel distance X-axis: 600 mm, travel distance Z-axis: 212 mm, The bid obliges the buyer to pick up the machine on time on March 4, 2025! TECHNICAL DETAILS Control: Heidenhain X-axis: 600 mm Z-axis: 212 mm Spindle speed: 5,000 rpm Tool holder: VDI Tool magazine positions: 12 MACHINE DETAILS Machine weight: approx. 5,500 kg Floor area: 5,000 x 2,500 mm Connected load: 44 kVA Dobjvxq R Eevara Tjut Voltage: 400 V, 50 Hz Cooling lubricant: KSS

Year of construction: 2013, operating hours: 63,326 h, Condition: used, Functionality: fully functional, Fully automatic MICROFINISH machine for machining camshafts with max. Ø 60 mm and a total length of 700 mm. Year of manufacture 2000/2013 converted to pass bearing machine. TECHNICAL DETAILS workpiece length: 700 mm swing diameter: 60 mm center height: 1050 mm Dusbvaraopxl Uho Tot spindle stroke: 42 mm tailstock stroke: 250 mm number of spindles: 1 number of fiducial bearing machining stations: 1 piece Control: CNC Speed: 25 - 250 rpm (infinitely variable) oscillation stroke: 0 - 6,5 mm Oscillation frequency workpiece (axial): 100 - 1000 DH/min MACHINE DETAILS total power requirement: 61 kW machine weight: approx. 9 t (without additional aggregates) space requirement: approx. 4 x 2.5 x 2.4 m

Condition: excellent (used), Year of construction: 1979, Functionality: fully functional, workpiece weight (max.): 800 kg, workpiece length (max.): 2,000 mm, workpiece width (max.): 400 mm, module thread tooth pitch (max.): 10, TECHNICAL DETAILS Workpiece width: 400 mm Workpiece length: 2000 mm Module: max. 8 / 10 Processing length: 1850 x 160 mm Stroke: 180 mm Table surface: 360 x 2200 mm Cutting wheel diameter: 5 " Workpiece weight: 800 kg Cutting wheel mounting diameter: 1 3/4 " MACHINE DETAILS Total power requirement: 12 kW Machine weight: approx. 7.2 t Space requirement: approx. 5.5 x 2.3 x 2.4 m Duobvaret R Sw Tsa Tst

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Dsbvovuq Uveara Tsut Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: KU 4165M, travel distance X-axis: 572 mm, travel distance Y-axis: 322 mm, travel distance Z-axis: 265 mm, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Loading modules: 1 module Processing modules: 3 modules Number of spindles: 6 Control System: Bosch Rexroth MTX Part program size: unlimited Remote diagnosis: available Programming: ISO code, simulation using CAM software EdgeCAM Workpiece transport and loading system Loading system: parallel to machining time, manual, with 3-axis handling or robot Part feed: Paternoster / stacking magazine Workpiece change (chip-to-chip time): approx. 6 s Axes Travel path X: 572 mm Travel path Y1/Y2: 322 mm Travel path Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed force X: 1,100 N Feed force Y1/Y2: 1,100 N Feed force Z: 2,500 N B-axis speed: 1,000 rpm Dusbvajvt Tw Rsra Tjt C-axis speed: 500 rpm B-axis acceleration: 52 rad/s² C-axis acceleration: 90 rad/s² B-axis torque clamped: 1,000 Nm B-axis torque unclamped: 287 Nm C-axis torque clamped: 300 Nm C-axis torque unclamped: 187 Nm Work spindle Tool holder: HSK 40-A Outer diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% ED): 85 Nm Power (S6 45% ED): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece clamping Clamping system: EROWA clamping system Activation: pneumatic, 6 bar Tool changer Tool disks: can be externally pre-equipped with location coding, diameter: Ø 290 mm Tools (2 disks with 12 spaces) per machining module: 22 Weight of tool disk: 5 kg Max. tool weight: 2.5 kg Max. free tool length: 186 mm Max. Tool diameter: 63 mm Max. tool diameter with free space: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. weight of tools on the disk: 15 kg Positioning time per tool step: 250 ms Tool holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Dimensions of the machine (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per processing module: approx. 4.5 t Weight per loading module: approx. 2.5 t Safety system Doors: Locking switches on all doors to the work area Axis control: Control of all axes with one controller CNC and PLC: integrated on one module Interfaces: sercos 16 Mbaud, Profibus DP, Ethernet Transformation: 5/6-axis transformation Tool correction: 3D tool path correction Look-ahead: up to 1,000 sets Connection values Current consumption: 60 A Power: 40 kVA Compressed air: min. 6 bar Voltage: 3 AC, 400 V Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,487 h, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 18,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Number of axes: 3 Control: HEIDENHAIN iTNC530 X-travel: 1,200 mm Y-travel: 800 mm Z-travel: 560 mm Table size: 1,200 x 850 mm Max. weight on the table: 1,800 kg Spindle Spindle speed: max. 18,000 rpm Spindle holder: HSK63 Feed rate Rapid traverse speed: 90 m/min Tool changer Dsbeu U Egzevara Teut Tool changer (ATC): 30 positions MACHINE DETAILS Hours under power: 30,790 h Hours in production: 19,487 h EQUIPMENT - Chip conveyor - Approx. 50 HSK63 tool holders - Complete documentation

Condition: good (used), Year of construction: 2001, Functionality: fully functional, pressing force: 225 t, working length: 6,050 mm, TECHNICAL DETAILS Axes controlled: Y1, Y2, X, R, Z1, Z2 Pressure: 225 t Bending length: 6050 mm Control: CYBELEC DNC 1200 PS Dimensions: 6,050 x 2,150 x 3,167 mm Total power requirement: 18.5 kW EQUIPMENT - 2 bending aids in front of the machine - 2 support arms in front of the machine - pneumatic tool clamping at the top - crowning, die shifting - foot switch Tool holder: Dujbvarajvuq Naj Tjt - top: 26 mm EHT - bottom: 55 mm EHT Please note: This machine is an underfloor machine

Condition: ready for operation (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle Dujbsvt Tu Nevara Tjt TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: good (used), Year of construction: 2005, operating hours: 25,217 h, Functionality: fully functional, machine/vehicle number: R7AT0601, turning length: 744 mm, turning diameter: 600 mm, rotational speed (max.): 7,000 rpm, bar passage: 65 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Specification: 7 axes, 2 spindles, 2 turrets Control: SIEMENS 840D Turning diameter: max. 600 mm Length of the workpiece: max. 744 mm Turning diameter on the slide: 500 mm Dobvarajt S T U Nj Tjut Distance between spindle noses: 975 mm Turning diameter: 430 mm Diameter of bar passage: 65 mm Travel distance X/X2 axis: 280/205 mm Z/Z2/Z3 axis travel: 900/750/750 mm Y-axis travel: 100 (upper turret) ± 50 mm Main spindle speed: 0 - 5000 rpm Torque: max. 250 Nm Main spindle power: 29 kW Counter spindle speed: 0 - 7000 rpm Torque: max. 130 Nm Power of the counter spindle: 22 KW C-axis indexing: 0.001 ° Rapid traverse of the C-axis: 1000 rpm Upper turret: 12 motorized VDI40 stations Turret indexing time: 0.2 s Lower turret: 12 motorized VDI40 stations Switching time of the turret: 0.2 sec. Drive power of the motorized tools 6.7 kW MACHINE DETAILS Switch-on hours: 52,581 h Spindle hours: 25,217 h Machine dimensions: 3,400 x 2,550 x 2,300 mm Total weight: approx. 9,500 kg Connected load: 46 kVA EQUIPMENT - LNS MOVE bar feeder - 2 collet chucks - Various tool holders, including motorized axial and radial holders - Pneumatic parts reloader with conveyor belt - 300-liter high-pressure coolant system 2 pumps, 2.2 kW - Oil cooler for spindle - Air-conditioned cabinet - Complete manual and diagrams

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, pressing force: 225 t, bending length: 4,100 mm, controller manufacturer: Cybelec, TECHNICAL DETAILS Pressure: max. 225 t Folding length: max. 4,100 mm Stroke: max. 265 mm Total output: 18.5 kW Control: Cybelec Machine weight: approx. 21,500 kg Debevuq Ehjvara Teut EQUIPMENT - Lower beam crowning for precise bending processes. - 2 manual support arms - 2-hand foot switch