Second-hand machinery for sale (2,431)

Condition: good (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 00216, HIGHLIGHTS - Measuring device for inspecting cutting edge preparation - Compact design - Low weight and high rigidity thanks to carbon - High level of work safety - Results in a workshop environment TECHNICAL DETAILS Max. Z-axis: 300 mm Lateral resolution: 1.2 µm Height resolution: 0.1 µm Dkob Hovurzqoc Ircol Measuring volume: 1.6 x 1.2 x 1.0 mm³ Measuring points: 1.3 million Data acquisition: 2 s Smallest measurable working distance: 30 mm Measuring cutting edge rounding: 2D/3D evaluation Maintenance: Full-service maintenance is carried out until 06/24. EQUIPMENT - Zoller pomSKpGO pilot 3.0 - Software pomSKpGo 3.0/4.0, current program version 1.17.0.21166 - Universal holder pomPrisma swiveling (holder for drills, milling cutters) - Indexable insert holder pomSKpGonio 2A - Calibration gauge pom R13µm including wooden box - pomSKpGo transport case with wheels and pull handle

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,743 h, Functionality: fully functional, machine/vehicle number: 28830006172, The machine is equipped with a chain magazine, pallet turntable and loading station. MAINTENANCE - Motor and pump for the hydraulic system replaced - Replaced the hoses - LI module replaced in the control cabinet - Drum on the Knoll system replaced TECHNICAL DETAILS X-travel: 600 mm Y-travel: 560 mm Z-travel: 560 mm B-axis: 360° Control: SINUMERIK 840D powerline Infinitely variable speed: 0 - 8000 rpm Tool magazine: Chain magazine Number of tool positions: 90 / max. 450 kg Circular pallet storage: "compact" Rotation speed PSA axis: 3 rpm Positioning time 1 x 90°: 3 s Pallet change time: 6 s Number of storage locations: 4 Pallet size: 400 x 500 mm Loading height: 1100 mm Load with 1/2 loaded pallets: max. 350/600 kg/pallet Maximum workpiece weight with one-sided load: 350 kg Workpiece height: 770 mm Torque 100 % / 40 % ED: max. 124 / 191 Nm Motor power 100 % / 40 % ED: max. 13 / 20 kW Feed rate: 60,000 mm/min Deb Hcotrdrns Ircskl Rapid traverse: 60 m/min Set-up mode: 2,000 mm/min Feed force X,Z / Y: 9600 / 8000 N Position measuring system Resolution: 0.001 mm (position tolerance according to VDU DGQ 3441) MACHINE DETAILS Machine dimensions L x W x H: 4.5 x 2.4 x 2.4 m Installation area: 7 x 5 m Transport weight incl. cladding: 3,400 kg Transport dimensions DMC 60 H L x W x H: 2.9 x 2.0 x 2.4 m Connected load DMC 60: 80 kVA EQUIPMENT - Chip conveyor - Technical documents and installation plan available

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, travel distance X-axis: 2,500 mm, CNC punching machine with fully automatic loading system TECHNICAL DETAILS Control: CNC AMADAN 04 P-C Automation & Safety Loading system: LKI L III 250 automatic loader Unloading system: PR III automatic unloader Sorting: Automatic part sorting on pallets possible Noise protection: Noise protection hood Safety equipment: SICK photoelectric sensors, original safety fences Processing capacity Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table system Table type: Brush table for quiet operation and scratch-free processing Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Punching Pneumatic punches: 2 pieces MACHINE DETAILS Power supply: Three-phase Overall length: 15,000 mm Total width: 5,000 mm Total height: 2,000 mm Punching machine weight: 16 t Loader weight: 2.3 t EQUIPMENT - Automatic loader LKI L III 250, built in 2011 - Automatic unloader PR III Dkeb Hcjwc S R Hs Ircol - Noise protection hood - SICK photoelectric sensors - Original safety fences - Brush table - Automatic sheet repositioning - Air blow lubrication - Two pneumatic punches Further technical details according to the manufacturer - without guarantee Ram stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction) Stroke length: 8.0 mm – Pitch: 25.4 mm – Stroke frequency: 300 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 25.4 mm – Stroke rate: 375 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 2.0 mm – Stroke rate: 600 / 600 strokes/min Tool turret Tool type: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 of which are auto-indexable) Accuracies Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeat accuracy: ± 0.025 mm

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 120K587, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,300 rpm, Equipment: chip conveyor, documentation/manual, Machine comes from the test laboratory of a marine gearbox manufacturer and has not been a production machine, therefore it has few operating hours. An exact reading is not possible as the machine is not under power TECHNICAL DETAILS Control: Heidenhain TNC426M/410M Travel X / Y / Z: 1020 / 600 / 560 mm Spindle speed: max. 10,300 rpm Spindle torque: max. 252 Nm Milling table size: 635 x 1,200 mm Workpiece weight: max. 1,000 kg T-slots: 6 x 18 mm H8 Feed rate per axis: 32 m/min Tool holder: BT40 Tool magazine size: 24 slots Tool diameter / length: 88 - 125 / 300 mm Tool change time: 2.5 s Chip-to-chip time: 6 s Dksb Hot Tdyloc Ircsl MACHINE DETAILS Height: 2,825 mm Width: 2,650 mm Length: 2,200 mm Weight: 7,500 kg Drive power: 39 kW Lubricant tank volume: 4L Coolant tank volume: 400L EQUIPMENT - Fully encapsulated work area with roof - Chip conveyor - Central oil lubrication - 3D probe - Handwheel

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, TECHNICAL DETAILS Measuring field X x Y: 500 x 380 mm Camera: 2x 2MP GigE CCD cameras Resolution: 1624 x 1236 pixels Software: ATOS measurement software + GOM Inspect V8 evaluation software Rotation table (motorized) Diameter: 640 mm Load: max. 150 kg Control unit Screen diagonal: 19" Manual control: via joystick Automatic control: via ATOS software Column stand Height: 1.8 m Boom: 0.9 m Details: swivel/swivel head, adapter available MACHINE DETAILS Dimensions: approx. 340 x 130 x 230 mm Weight: approx. 3.9 kg EQUIPMENT - LED lighting Djbettky As Hc Ircskl - Laser pointer for distance adjustment - Integrated control unit - 10m cable - Lenses for the above measuring field - Calibration object for the above measuring field with calibration certificate - Transport case - Notebook with docking station: 64-bit Intel Core i5 processor, 2.66 GHz (DualCore) 8 GByte main memory NVIDIA Quadro OpenGL graphics card 15.4" display:1920 x 1050 pixels 500 GB hard disk DVD+/-RW / CD-RW burner Cardbus-Firewire card Gigabit Ethernet network Operating system: Windows (64 bit)

Condition: good (used), Year of construction: 2005, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 60 rpm, TECHNICAL DETAILS Travel X/Y/Z axes: 500 x 350 x 500 mm Max. workpiece dimensions (width x depth x height): 880 x 680 x 350 mm Max. workpiece weight: 800 kg Workpiece area Work tank type: Automatic lowering tank Internal tank dimensions: 1,090 x 730 x 490 mm Dkjb Hovuqxbsc Ircsl Bath height: 0 - 390 mm Machine table Clamping surface: Grid plate with 50 mm hole grid Programmed brake position: yes Dimensions: 800 x 600 Integrated C-axis Indexing and rotation: Interpolation with X, Y and Z as well as spiral machining Speed: 60 rpm Max. working current: 72 A Electrode changer Automatic: integrated Electrode weight: 100 kg Generator Type: AGIE IPG "Intelligent Power Generation" Best surface roughness Ra: 0.1 µm Dielectric unit Loading volume: 620 l Filter quality: 4 cartridges with 8 filter elements Cooling system: water/air heat exchanger Temperature control: ± 1 °C automatic MACHINE DETAILS System dimensions: 2,855 x 2,135 x 2,965 mm Distance floor - clamping height: 884 mm Net weight: approx. 3,900 kg Gross weight: approx. 5,500 kg Cooling System: water/air cooler for generator, control and dielectric Norms and guidelines Standards: Directive 89/336/CEE Electromagnetic compatibility

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 26489, Year of construction: 2014, operating hours: 20,875 h, load capacity: 1,600 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviced & tested (C5 test) battery for electrical devices (min. 75% capacity) - Serviceable tires according to FEM-4.004 (min. 80% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Load capacity: 1,600 kg Lifting height: 4,500 mm Load center: 500 mm Operating hours: 20,875 h Mast type: Triplex Fork length: 1,150 mm Dkjb Hcsvn R D Rs Ircsl Height: 2,100 mm Own weight: approx. 3,000 kg Battery capacity (C5): 75% (protocol is enclosed with delivery) Tires Front: solid rubber, 80% Rear: solid rubber, 80% EQUIPMENT - Side shift - Fork adjuster - Work lights - Charger on request

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 26291, Year of construction: 2018, operating hours: 17,369 h, load capacity: 1,500 kg, lifting height: 5,200 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviced & tested (C5 test) battery for electric devices (81% capacity) - Serviceable tires according to FEM-4.004 (min. 70% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Load capacity: 1,500 kg Lifting height: 5,200 mm Load center: 500 mm Operating hours: 17,369 h Mast type: Triplex Fork length: 1,150 mm Height: 2,400 mm Own weight: 3,018 kg Dksbovn R Atj Hc Ircol Battery capacity (C5): 81% (protocol is included with delivery) Front tires: solid rubber Rear tires: solid rubber EQUIPMENT - Side shifter - Charger on request

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 27744, Year of construction: 2019, operating hours: 7,036 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,270 mm, Equipment: sideshift, Checked and guaranteed by the seller: - Full functionality according to FEM-4.004 - Serviceable tires according to FEM-4.004 (min. 70% tread depth) - Lifting frame, fork carriage, attachments and hydraulic system, hoses checked - Steering axle checked for safety - Forks and lifting chains checked Dksbevn Rq Re Hc Ircsl - Driver's seat and seat belt as good as new - New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Gas (LPG) Load capacity: 2,500 kg Lifting height: 4,700 mm Operating hours: 7,036h Mast type: Triplex Fork length: 1,150 mm Height: 2,270 mm Own weight: 3,965 kg Tires Front: solid rubber Rear: solid rubber

Condition: good (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 0127(009), turning length: 205 mm, spindle speed (max.): 12,000 rpm, turning diameter: 13 mm, drilling capacity: 8 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control system: FANUC 16i-T Number of axes: 9 (X, C1, Y, E, B, A, X, C2) Machining range Max. bar diameter: 13 mm Max. turning length: 205 mm Main spindle Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Counter spindle Collet: available Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Tool equipment Tool holder: 4-way Cross drilling devices: 3 pieces Drilling capacity: 8 mm Turret: with 8 stations Speed of driven tools: 5,750 rpm Additional tool holders: various available Quills: available MACHINE DETAILS Connected load: 9 kVA Tank capacity: 170 l Coolant: oil Dimensions and weight Machine (L x W x H): 2,700 x 1,400 x 1,700 mm Weight of machine: approx. 1,700 kg Loading magazine (L x W x H): 4,300 x 600 x 1,800 mm Weight of loading magazine: approx. 700 kg Peripherals & accessories (L x W x H): 1,200 x 800 x 1,000 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Manuals  - Machine operating tools - Tool holder - Loading magazine FMB Turbo 2-16 (Ø2 - Ø20 mm, length: 3,200 mm, variant "A") - Parts conveyor belt - Extinguishing system Kraft und Bauer - Manuals and operating tools for the machine Dksb Hc Ijvuza Aorcol

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 530008, Coordinate measuring machine with probe change system Optional external programming station can be purchased additionally TECHNICAL DETAILS Measuring range X / Y / Z: 700 / 1000 / 600 mm Probe head: VAST XT gold #001RHOPF Measuring software: CALYPSO 5.6 including curve option Control: C99 with control panel BP26_SE EQUIPMENT - 7-fold probe changing system - Push-button plate - Probe accessories - Calibration sphere: #G00559-b r=14.9999 HP - Workstation with monitor - Documentation Further accessories Djb Hc Irjttkgmecekl - OPTIONAL: with external programming station CALYPSO 5.6 Last calibration 08/2023

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Dkjb Hovuqtfsc Ircsl Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0422300345, working width: 1,350 mm, grinding height: 160 mm, working height: 900 mm, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, TECHNICAL DETAILS Operating side: left Working width: 1,350 mm Workpiece thickness: 3-160 mm Belt speed: 4-20 m/min Rollers: 2 steel rollers and 1 rubber roller Rollers and motors 1st motor power: 37 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 2nd motor power: 30 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 3. motor power: 22 kW, rubber contact roller Ø 240 mm, 70 Shore, sanding belt 1,370 x 2,620 mm Transport motor: 7 kW with inverter Brush motor: 0.75 kW Vacuum fan motor: 7.5 kW Extraction Dust extraction requirement: 13,490 m³/h Display and control Dob Heukq I Rjc Ircekl Display: 10" touchscreen Program memory: 1,024 Resolution: 640 x 480 pixels MACHINE DETAILS Length of the machine: 2,970 mm Width of the machine: 2,050 mm Height of the machine: min. 2,255 mm - max. 2,415 mm Working height: 900 mm Amperage: 200 A Voltage: 400 V SCCR: 18 kA, 50 Hz Total connected load: 105 kW Max. Air pressure: 8 bar EQUIPMENT Equipped with 2 steel and 1 rubber roller

Condition: excellent (used), Year of construction: 2015, operating hours: 6,609 h, Functionality: fully functional, machine/vehicle number: SL600Q-A0256, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, workpiece height (max.): 340 mm, workpiece width (max.): 800 mm, workpiece length (max.): 570 mm, TECHNICAL DETAILS Workpiece dimensions flushing: 800 mm x 570 mm x 340 mm Workpiece dimensions submerged: 800 mm x 570 mm x 280 mm Maximum workpiece weight: 1,000 kg Work table dimensions: 1,050 mm x 850 mm X-axis: 600 mm Y-axis: 400 mm Z-axis: 320 mm UV-axis: 120 mm x 120 mm Maximum cone angle: ±25° (for workpiece thickness 130 mm) Wire diameter: 0.1 - 0.3 mm Maximum wire speed: 420 mm/s Wire tension: 3 - 23 N Weight of wire spool: 8 kg Processing method: flushing, submerged Table height: 995 mm Dielectric tank External dimensions (W x D): 825 mm x 2,400 mm Weight (empty): 500 kg Tank capacity: 850 l Filtration method: 3 replaceable paper filters Ion exchanger: Ion exchange resin (18 liter type) MACHINE DETAILS Without accessories: 2,635 mm x 2,865 mm x 2,300 mm With accessories: 3,920 mm x 4,215 mm Machine weight: 4,500 kg Transport dimensions: 2,635 x 2,865 x 2,200 mm Operating hours: 67,181 h Cutting time: 6,609 h Air pressure: 0.5 MPa Air flow: 30 NL/min Power consumption: 13 kVA Dkeb Hevw Ag Aec Ircel EQUIPMENT - Wire chopper (L-Cut) - Taper Flex 3D Optional extension: Solidworks and DemaCut can be purchased for an additional EUR 5,000.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: A 0204/6707, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 600 mm, TECHNICAL DETAILS Workpiece length: 120 - 2,500 mm Workpiece width: 50 - 600 mm Workpiece thickness: 12 - 40 mm Control: KOCH Numeric with Windows 2000 Sawing station Sawing station part length: up to 560 mm Saw guide: in measuring rail Measuring stop: tear-free cuts Thickness measurement: bar encoder Separate Z-adjustment: for manual and machine operation Frequency converter: for saw motor Saw blade take-off: available Horizontal drilling station Drilling spindles: 5 spindles per side Dowel tool: 1 x type 3B for dowels 10 x 40 mm Dowel spacing: 7-14 mm Electronic glue monitoring: KOCH ELC Vertical drilling station Empty station: between horizontal and vertical processing Top support: 1 x with 2 guide tracks Vertical drilling support: 1 piece, NC in X + 2 x Y + Z Dob Hcovcm Uuo Ircskl Vertical drilling support: 2 separately adjustable drilling spindles in Y Drilling head: 28 drilling spindles (14 spindles each for X and Y) Suction and clamping shoes: 2 pieces Horizontal drilling spindles: 2 pieces for longitudinal drilling on the front and rear side Grooving head: 0°/90° swiveling Carrier: with linear guides for center support Workpiece center support: (automatically lowerable) with NC adjustment in X Workpiece support Workpiece stop: for processing strips Workpiece width: max. 140 mm Clamping of strips: via back gauge MACHINE DETAILS Height: 2,300 mm Length: 5,600 mm Width: 6,000 mm Basic equipment - NC width adjustment - 1 support with NC axis in Y on each side - 1 horizontal drilling station with 1 drilling spindle per side - 1 doweling tool with ELC glue monitoring per side - 1 vibratory conveyor with control mirror per side - Central axis with 1:1 glue pump - 2 NC height adjusters (Z-axis) - Belt infeed with NC-adjustable belt pulley - Workpiece transport with toothed belt and spring-loaded cams - Central lubrication - Telephone modem for remote diagnosis

Condition: excellent (used), Year of construction: 2016, operating hours: 44,682 h, Functionality: fully functional, turning diameter: 20 mm, spindle bore: 24 mm, rotational speed (max.): 10,000 rpm, feed length Z-axis: 210 mm, product length (max.): 80 mm, TECHNICAL DETAILS Control system: FANUC 32i-B Number of axes: 8 Main spindle Max. turning diameter: 20 mm Max. spindle bore diameter: 24 mm Max. speed: 10,000 rpm Max. power: 3.7 kW C-axis: 0.001° Z1 stroke: 210 mm Guide bush unit - synchronously rotating Type of guide bush: 22,001 / T223 Type of collet: 145E / F25 Counter spindle Max. speed: 8,000 rpm Max. power: 3.7 kW Max. gripping diameter: 20 mm Max. part length (forward ejection): 80 mm C-axis: 0.001° Z2 stroke: 210 mm Type of collet: 145E / F25 Tool slide X1, Y1 Tool holder plate: for 6 external turning tools 12 x 12 mm Cross drilling/milling device Number: 5 driven drilling/milling spindles modular Tool sizes: 2 x ER16, 3 x ER11 Power: 1.0 kW (S6000) Front drilling device: for 5 drilling spindles Rear machining with Y2 axis Tool carrier: for 8 tools 4 driven drilling/milling spindles: ER16 modular 4 fixed drilling/milling spindles: ER16 modular Speeds Dkebovuy N As Hc Ircsl Rapid traverse: 40 m/min (X1, Z1, C1, Y1, Z2, C2, X2, Y2) MACHINE DETAILS Operating hours: 44,682 h Connected load: 15 kVA Bar loading magazine: FMB Turbo 2-20, 2-23 mm/3,200 mm, attachment variant "A" Dimensions and weight Machine (L x W x H): 2,460 x 1,380 x 1,730 mm Weight of machine: approx. 2,900 kg Loading magazine (L x W x H): 4,220 x 620 x 1,800 mm Weight of loading magazine: approx. 600 kg Peripherals & accessories (L x W x H): 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Alignment shoes with leveling elements - Service tool set - Work area light - 3-color signal lamp - Safety door switch with lock - Maintenance and central lubrication unit with 1.8 l lubricating oil - Pneumatic blow-out device for the Pick-up spindle collet - Color monitor LCD/MDI - Parts conveyor belt with drip tray - Chip conveyor with coolant pump - Small fire extinguishing system Kraft und Bauer with CO₂ extinguishing agent container - Manual and documentation - Automatic shutdown function PowerOff - Program check function: test run possible via handwheel - Continuous thread cutting cycle - Runtime display/part counter - CF card interface - Tool radius compensation - Absolute reference point - Self-diagnosis function - Interface for JBS - Parts conveyor belt with drip tray - 1° indexing on pick-up spindle - Chip conveyor with coolant pump - Coolant oil

Condition: used, Year of construction: 2011, operating hours: 4,433 h, Functionality: fully functional, machine/vehicle number: 0163000561, TECHNICAL DETAILS Turning length: 1200 mm turning diameter: 600 mm Speed: 3000 rpm C-axis and spindle brake (hydraulic): Automatic tailstock Control: Siemens 840D SL with ShopTurn Drive power 100/40% ED: 27.5 / 38.7 kW Tool turret: 12-position (disk turret) Number of driven tools: 12 Tool holder: VDI 40 MACHINE DETAILS Switch-on time: 17,831 h Spindle hours: 4,433 h Weight: 5.3 tons Connected load: 42 kVA Deb Hcetr D Spo Ircskl EQUIPMENT Reinforced coolant pump max 10 bar, 20 l/min Hydraulic chuck 315-91 ROTA NCK plus, Schunk Operating mode 4 - manual intervention with open work area doors Electrostatic air filter LTA Series 3000, AC 3001-R Year of manufacture 2015 Documentation Extensive additional accessories, e.g. 90 tool holders VDI40, 5 driven tools, Coromant Capto system, tool cabinets, tool trolleys, etc

Condition: good (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, table width: 400 mm, table length: 600 mm, TECHNICAL DETAILS Travel paths of axes X / Y / Z: 400 x 300 x 350 mm Positioning speed of axes X / Y / Z: 6 / 6 / 15 m/min Positioning speed in manual mode of axes X / Y / Z: 2 m/min Acceleration of axis Z: 10.0 m/s² Resolution of axes X / Y / Z: 0.1 µm Laser correction of axes X / Y / Z: linearity / angle / spindle pitch Integrated C-axis Max. electrode weight: 50 kg Rotational speed: 0 -100 g/min Max. mass moment of inertia: 5,000 kg cm² Max. working current: 140 A (in rotation mode) Max. working current: 140 A (static) Positioning accuracy according to ISO 230-2: 0.007° Resolution: 0.0005° Dielectric unit Capacity: 490 l Filter type: 4 cartridges Cooling system: Heat exchanger dielectric / water Temperature control: ±1 °C automatic Generator Generator type: ISPG (Intelligent Speed Power Generator) Pulse current: 80 A Best surface roughness Ra: 0.1 µm IQ module (graphite, copper): integrated Control Operating system: Windows XP Data input: 15" LCD screen, mouse or touchscreen, keyboard and remote control User interface: Vision 5 Work area Clamping plate with hole pattern: Hole spacing 50 mm Distance table - chuck: 170 - 520 mm Distance floor - clamping level: 1,000 mm Max. table size: 600 x 400 mm Max. work basin dimensions: 900 x 630 x 350 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Bath level: 0–290 mm Compressed air Pressure: 6 - 8 bar Average consumption: 100 ± 10 % m³/h Max. consumption: 270 l/min at a pressure of 6 bar while filling the work tank (duration approx. 40 s) Connection: hose coupling Ø 13 mm Cooling water Temperature: room temperature - 7 °C Quantity: approx. 20 l/min Dkeb Hcsvuqmfj Ircol Pressure: 1.5–3 bar Cooling and environment Heat exchanger for control cabinet: integrated Heat exchanger for dielectric: integrated Ambient temperature: recommended 20 °C - 25 °C MACHINES DETAILS Machine dimensions: 2,460 x 1,410 x 2,600 mm Dimensions with electrode changer: 2,460 x 2,100 x 2,600 mm Dimensions with pallet changer: 2,460 x 2,630 x 2,600 mm Weight Total weight: 3,830 kg Dielectric weight: 400 kg EQUIPMENT 1 heat exchanger for control cabinet, integrated. 1 heat exchanger for dielectric, integrated.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 34938, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, cutting depth: 80 mm, rotational speed (max.): 4,750 rpm, TECHNICAL DETAILS Swivel adjustment: 0 - 90° (manual) Cutting area: 4300 x 2200 x 80 mm Speed: 4750 rpm Dsb Hcoub Tr Ej Ircokl Feed: manual Design: automatically deflecting slatted frame Saw carriage lock: manual Saw unit immersion: manual MACHINE DETAILS Motor power : 4,4 kW Space requirement L x H x W: 5400 x 2900 x 1600 mm Type of installation: wall-mounted or free-standing

Condition: excellent (used), Year of construction: 2016, operating hours: 7,460 h, Functionality: fully functional, machine/vehicle number: 24627, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 150 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 55, swivel angle A-axis (min.): 135 °, swivel angle A-axis (max.): 135 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, 5-axis machining center with workpiece storage AUTOMATION Eco-Compact 20 workpiece storage and handling system: 20 workpiece storage spaces / Handling system for automatic loading / Integrated, pneumatic interface for Quick-Point clamping towers Swivel device: Easy swiveling of the system to a fixed point Quick-Point automation clamping tower 96: Height: 80 mm / Plate: Ø 176 mm / Body: Ø 246 mm Quick-Point round plate 96: Without holes / Ø 246 x 27 mm / Bolt spacing: 96 mm Macro-Grip automation clamp 77: Length: 170 mm / Clamping range: 0-160 mm TECHNICAL DETAILS X-axis travel: 450 mm Y-axis travel: 600 mm Z-axis travel: 330 mm Control type: Heidenhain TNC 640 Functions: Dynamic Efficiency (ACC, AFC, trochoidal milling), Dynamic Precision (CTC, AVD), HIMS (Hermle Information and Monitoring Software) Workpiece capacity Maximum jaw width: 470 mm Maximum workpiece diameter: Ø 450 mm Maximum workpiece height: 370 mm Interference circle (A-axis) in 0° position: Ø 610 mm Spindle Speed: 18,000 rpm Tool holder: HSK-A63 Power/torque at 20% duty cycle: 31 kW / 35Nm Tool magazine Interface: SK 40 / HSK A63 Magazine locations: 55 Chip-to-chip time: approx. 4.5 s Maximum tool length: 250 mm Maximum tool diameter with corresponding adjacent location occupancy: Ø 125 mm Maximum tool diameter: Ø 80 mm Maximum tool weight: 8 kg Maximum magazine load: 220 kg Rapid traverse and acceleration Rapid traverse linear (dynamic) X-Y-Z: 30 (50) m/min Acceleration linear (dynamic) X-Y-Z: 8 (15) m/s² Feed force linear X-Y-Z: 4,500 N Table Swivel rotary table: Ø 320 mm Clamping surface: Ø 320 mm Swivel range: +/- 135° Drive type C-axis: Torque Speed of swivel axis A (single-sided drive): 25 rpm Speed of swivel axis A (tandem drive): 55 rpm Speed of rotary axis C: 80 rpm Maximum table load: 150 kg Djb Hc Irovtmhpocskl Star-shaped T-slots: 4 pieces / 14 H7 Positioning uncertainty Positioning uncertainty (X-Y-Z axis according to ISO 230-2): ≤ 0.006 mm Chip management Chip chute: Space-saving installation on the left or right Capacity of chip chute: 210 l Chip conveyor: Scraper belt conveyor MACHINE DETAILS Switch-on time: 21,883 h Control switch-on time: 23,157 h Program run: 10,584 h Spindle hours: 7,460 h Power consumption: 46 kVA Net weight: 9000 kg Coolant supply Internal coolant supply: 80 bar Additionally required options: Bed flushing paper belt filter or internal coolant supply 80 bar Internal coolant supply 80 bar includes: - Paper belt filter including police filter - Standard coolant device - Flushing air for scales and bed flushing - Production cabin Safety and additional functions Vario valve: available Blow-off device: blown air through the spindle center Chip flushing gun: available Emulsion mist extraction: including post-filter Manual cabin roof: available Polycarbonate safety window: available Electronic equipment Electrical heat compensation: Heidenhain Electrical manual control module: Heidenhain Measuring probe: Renishaw including preparation BLUM tool breakage/measurement A2: available

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Suitable for facing, internal and external chamfering - machine in very good condition and with lots of accessories! Dkeb Hjvpgtqoc Ircel TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Workpiece weight (max.): 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of the milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Total power requirement: 26 kW Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 workstation - 2 spindle units. - Feed belt - Discharge belt - Fully automatic process flow

Condition: good (used), Year of construction: 1999, Functionality: fully functional, turning length: 205 mm, rotational speed (max.): 10,000 rpm, bar diameter: 20 mm, number of slots in tool magazine: 18, TECHNICAL DETAILS Control system: Cincom Mitsubishi Meldas Number of axes: 7 (X1, Z1, Y1, C1, X2, Z2, C2) Machining range Max. bar diameter: 20 mm Max. turning length: 205 mm Spindle Main spindle speed: max. 10,000 rpm Djb Hc Irsvuyf Rjcekl Main spindle C-axis: 0.001° Counter spindle speed: max. 10,000 rpm Counter spindle C-axis: 0.001° Tool capacity Tool holder: for a total of 18 tools (linear tool holder, front attachment, rear machining) MACHINE DETAILS Machine (L x W x H): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Loading magazine (L x W x H): 3,900 x 900 x 1,450 mm Weight of loading magazine: 850 kg EQUIPMENT - Parts conveyor belt - Loading magazine FMB Turbo 3-26

Condition: used, Year of construction: 2015, operating hours: 7,947 h, Functionality: fully functional, machine/vehicle number: 12710000163, Maho DMU 95 monoBLOCK lid with comprehensive equipment TECHNICAL DETAILS X / Y / Z travel: 950 / 850 / 650 mm C-axis: 360° Speed: motor spindle 18,000 1/min Clamping surface C-axis table: 850 x 750 mm Clamping surface fixed table: 1,000 x 750 mm Control: CELOS® with Siemens 840D sl Operate Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool clamping: according to DIN 69872 Magazine slots: 60 (chain magazine) MACHINE DETAILS Weight: 13.7 t Connected load: 50 kVA Switch-on time: 23,422 h Spindle hours: 7,947 IKZ: 40 bar / 23 l/min through spindle center (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - 21.5 ERGOline® Control with multi-touch screen Dkjb Hcotr D H Se Ircjl - 3D path control - Scraper belt chip conveyor with coolant system 600 liters, paper belt filter - Infrared measuring probe Renishaw PP60 optical (OMP 60) - 3D quickSET toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle center, selectable via M function - Operating mode 4 - manual intervention with open work area doors - Double switchover filter from Mahle on the coolant tank - Electrostatic air filter LTA 3000 BASIC Line 3002 year of construction 2015 - Documentation - Extensive additional accessories, e.g. 240 HSK-A 63 tool holders, long zero-point clamping system, extensive spindle tools (including - spindle tools (including Wohlhaupter), Coromant Capto system, tool cabinets, tool trolleys, etc.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0-201-08-7963, TECHNICAL DETAILS Traversing speed in X-direction: Max. 60 m/min. Traversing speed in Y-direction: Max. 60 m/min. Travel speed in Z direction: Max. 30 m/min. Workpiece length X-direction: max. 3440 mm with single loading Workpiece length Y-direction: max. 3710 mm for milling with tool diameter 25 mm Workpiece thickness: max. 300 mm incl. clamping device Z-axis for main spindle travel: 800 mm & second Z-axis for drilling head Vacuum pumps: 4 pcs. Clamping table grid Raster groove exit tables: 2 pcs. Working height of grid table: 850 mm Grid dimension: 30 mm Groove width: 7 mm Groove depth: 7 mm Distance between vacuum holes: 120 mm Dkeb Hjtt R E Njc Ircol EQUIPMENT 5-axis main spindle 15 KW " DRIVE 5+" with vibration sensor Unit interface DRIVE 5+ Disk changer 18-FACH Drilling head 17 spindles horizontal + saw 0/90° Pick-up space for saw blade 350 mm Climbing conveyor Chip and offcut disposal Power Control PC 85 with PLC control Software: Windows XP operating system, WOODWOP-PAKET AV-PC Feeding portal HOMAG Profi TBA370/40/16 Turning and alignment station

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle speed (max.): 24,000 rpm, Provision: FCA - loading equipment must be provided by the buyer - can be borrowed from Homag TECHNICAL DETAILS Workpiece lengths: max. 6,000 mm (single), max. 2,375 mm (pendulum) Workpiece lengths for workpiece Ø 25 mm: max. 6,175 mm (single), max. 2,550 mm (pendulum) Front workpiece width: max. 1,150 mm (all units) Workpiece width at the front for routing with 25 mm diameter: max. 1,220 mm Front workpiece width for gluing: max. 1,220 mm Workpiece width at the rear: max. 1,400 mm (all units) Workpiece width at the rear for routing with 25 mm diameter: max. 1,550 mm Debou Sz Nyj Hc Ircjkl Rear workpiece width for gluing: max. 1,475 mm Rear workpiece width with standard flush trimming and gluing: max. 1,500 mm Workpiece thickness: max. 300 mm including clamping device (router) Workpiece thickness with standard clamp: max. 60 mm Workpiece thickness: min. 12 mm (chamfer milling) Workpiece thickness: min. 16 mm (radius milling or min. 2 x radius + 10 mm) Spindle and tool changer Main spindle: 15 kW, HSK F63 Spindle speed: 24,000 rpm C-axis: with unit interface Plate changer: 18-position, D = 130 mm Tool weight: max. 6 kg Tool weight incl. holder for units: max. 10 kg Drilling head Spindles: 30 (V20 / H10 / S360° "MPU") Drill head motor: 2.7 kW, frequency-controlled Speed: max. 7,500 1/min Vertical spindles: 20, high-speed, arranged in a U-shape (3 rows with 11, 3 and 6 spindles) Horizontal spindles: 10, arranged in pairs (4 pairs with 32 mm pitch, 1 pair 320 mm apart) Sawing and routing Grooving and cutting saw: saw blade Ø max. 200 mm Attachment milling spindle for drilling head: 6 kW (for S6 operation) FLEX-5 FLEX-5 sawing, milling and drilling unit: for tool changer C-axis extension for FLEX-5 unit: Coupling element for C-axis Gluing unit POWER EDGE gluing unit: For gluing edge material to straight workpiece edges Edge height: max. 105 mm (gluing unit BAZ222/322) Workpiece thickness during edging: max. 100 mm Further units Flush trimming unit: for tool changer Combined flush trimming and scraper unit: WD 100 mm Combination snipping and corner rounding unit: traced Lock case trimming unit: 2 spindles, D = 16/20 mm EQUIPMENT - with gluing unit - with FLEX-5 unit - Chip conveyor belt: for B200/52-72 - LED position indicator: Console 1,300-1,600 mm - LED position indicator for precise workpiece handling - Extended workpiece processing options thanks to flexible unit system - without tools The technical data and descriptions are taken from a copy of the order confirmation at the time. Data is for information only and is not binding.