Second-hand machinery for sale (2,405)

Year of construction: 2007, Condition: good (used), Functionality: fully functional, fuel type: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity/load: 4,99 t load center: 500 mm load distance: 535 mm Wheelbase: 2078 mm Lifting speed: 0.49 / 0.53 m/s Lowering speed: 0.54 / 0.51 m/s Axle load with load front/rear: 10355 / 1215 kg Axle load without load front/rear: 2880 / 3700 kg Tires: SE Tire size front: 315 / 70-15 (300-15) Tire size rear: 250 / 70-15 (250-15) Track width front: 1190 mm Track width rear: 1122 mm Turning radius: 2745 mm Inclination mast / fork carriage: 5,0 / 9,0°. Height of mast retracted: 2421 mm Height of mast when extended: 3916 mm Height above protective roof: 2416 mm Free stroke: 150 mm Lift: 3000 mm MACHINE DETAILS weight: 6580 length: 4116 mm width: 1448 mm Engine: VW CPYA; 55 kW Consumption: 4,6 l/h Driving speed: 24 km/h Tractive force with/without load: 25285 / 22375 N Dkeb Hmhdopq R Hlsxjl

Condition: good (used), Year of construction: 2003, Functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, injection pressure: 1.632 bar, overall weight: 76,500 kg, TECHNICAL DETAILS Closing side Drive type: fully hydraulic Closing type: Fully hydraulic Construction: four-bar Closing force: 10,000 kN Panel size (h x v): 1,960 mm x 1,690 mm Beam dimensions (h x v): 1,120 mm x 1,400 mm Installation height: 550 mm / 1,020 mm Djb Hsu R Nttomhdxokl Opening travel: 1,000 mm Panel spacing: 2,120 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering D movable plate: 250 mm Centering D fixed platen: 315 mm Threaded hole for clamping plates: M24 Dimensions (LxWxH): 11.60 m x 2.90 m x 2.50 m Total weight: 76,500 kg Injection side Screw diameter: 120 mm Stroke volume: 5,655 cm³ Injection pressure: 1,632 bar L/D ratio: 22 Screw geometry: 9 L/D Screw stroke: 500 mm Screw speed: 130 1/min Plasticizing flow: 144 g/s PS Injection flow into the atmosphere: 1,144 cm³/s Number of heating zones: 8 Nozzle delivery force: 226 Pump drive power: 110 kW Heating power: 81 kW Oil tank capacity: 1,520 l EQUIPMENT On-screen text in German Compact flash drive Hydraulic core pull 4x Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler mold heating 16x

Year of construction: 2007, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 282395-6570 002, No minimum price - guaranteed sale at the highest bid! Fully automatic cutting and processing of aluminum profiles in throughfeed for building elements, facades, furniture and industrial applications. Machine was overhauled in 2022 - in-transport plastics renewed, Schüco service done and adjusted, new circular saw blade purchased, and more TECHNICAL DETAILS Processing length: max. 7,500 mm Profile cross-section: max. 160 x 270 mm height Working height feed magazine/machine: 950 / 1,120 mm Pneumatic operating pressure: 6 ± 1.5 bar X-axis travel: 246 mm Y-axis travel: 250 mm Speed: max. 170 m/min Positioning accuracy: ± 0.1 mm / 1,000 mm Angle of rotation B-axis: max. ± 45° Saw motor power: 3 kW Dob Hmhju U Hf Eodxjkl Saw blade speed: max. 3,000 rpm Tools Saw blade diameter: 550 mm Condition: new in 2022 MACHINE DETAILS Rated voltage/frequency: 400 V / 50 Hz Number of phases/neutral conductor/protective earth conductor: 3 NPE Rated current consumption: 35 A Machine weight: 1,700 kg Note: The machine's take-off has been shortened, but can be extended again

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 81066, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 60 kg, table width: 254 mm, table length: 254 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Equipment: documentation/manual, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Work surface: 254 x 254 mm Table holes: M14 x 8 pieces Table indexing (4th axis): 0.001° Max. pallet load: 60 kg Max. tool loading capacity: 350 x 400 mm Travel paths X-axis: 305 mm Y-axis: 305 mm Z-axis: 330 mm B-axis: 0.001° - 360,000° Distance table top edge - spindle center: 60 - 365 mm Dob Hmevvktnohdxjkl Distance table center line - spindle head: 60 - 390 mm Spindle Spindle cone: NST No. 30 Speed: 80 - 8,000 rpm Drive: 1-stage C.O.G. Belt drive (no V-belt/no slippage) Cooling: IKZ Feed Rapid traverse (X, Y, Z axis): 40,000 mm/min B-axis feed: 8,000°/min (22.2 rpm) Milling feed (X, Y, Z): 0 - 15,000 mm/min Delay at this rapid traverse: 0.012 s Tools Tool storage: 24 Tool changing method: direct control (fixed holder location-AI2VW) Tool holder: MAS BT30 Max. tool dimensions (d x l): Ø 50 x 200 mm Max. tool weight: 2 kg Tool changing time: 1.2 s Chip-to-chip time: 3.0 s Motor Spindle motor (30 min./continuous operation): AC 3.7/2.2 kW Motor for tool changer: AC 400 V Motor for cooling system: AC 1,210 W Lubrication: Grease lubrication Mains connection: 8 kVA MACHINE DETAILS Machine height: 2,284 mm Floor area: 1,650 x 2,850 mm Machine weight: 4,090 kg Operating hours: No recording possible, used since 1999 in a mix of one to three shift operation No extraction is supplied and the system is currently prepared for a minimum quantity lubrication AM4000 from Knoll.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 66586, grinding length: 650 mm, grinding width: 323 mm, grinding height: 450 mm, table length: 600 mm, table load: 420 kg, table width: 400 mm, TECHNICAL DETAILS X-axis: 600 mm Z-axis: 450 mm Y-axis: 323 mm Magnetic clamping plate Type: Electro-permanent magnetic clamping plate Size: 600 x 400 mm Table load: 420 kg Area of application: High-precision machining Features: Electronic demagnetization and holding force coding Pole pitch: 18 mm (transverse parallel pole) Air hole set: 2 x 3 holes, central locking device Dressing system Type: Hydraulic straight dresser Automatic: Automatic dressing with compensation of the dressing amount, grinding wheel wear, intermediate dressing and grinding head reset Dksb Hmhovw Su Aodxol MACHINE DETAILS Installation dimensions: 4,350 x 3,700 x 2,300 mm Machine dimensions: 3,425 x 2,263 mm Weight: 3,200 kg Connection power: 9.5 kVA EQUIPMENT - Microcomputer control group for magnetic clamping plate - Electro-permanent magnetic clamping plate (600 x 400 mm) with demagnetization and holding force coding - Belt filter machine SBF 30 Complete with 150 l tank, pump, supply lines, fittings and 1 roll of filter fleece - Replacement disk flange (Ø 127 mm). - Automatic dressing with hydraulic dresser

Condition: used, Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 130XX, travel distance X-axis: 20,000 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,400 mm, spindle speed (max.): 795 rpm, drilling depth: 1,400 mm, spindle motor power: 51,000 W, General overhaul in 2000 TECHNICAL DETAILS Support sleeve diameter: 390 mm X-travel: 20000 mm Drill spindle diameter: 150 mm Work spindle diameter: 1400 mm Milling spindle diameter: 240 mm Deb Hmhjvw Atcsdxjkl Speed range - stepless: 2 - 795 rpm Stepless feed: 3 - 1800 mm/min Rapid traverse X-axis: 1800 m/min Rapid traverse Y-axis: 1400 m/min Creep speed: 75 mm/min Drive power - spindle motor: 51 kW Machine weight: approx. 100 t Drilling depth: 1400 mm

Condition: good (used), Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: FAGOR, controller model: 8055i/Plus MC, rotational speed (max.): 10,000 rpm, overall weight: 8,100 kg, TECHNICAL DETAILS Control unit Control unit: Fagor 8055i/PLUS MC Spindle Spindle holder: BT40 Spindle speed: 10,000 1/min Dkjb Hmeu Ni Nxjhdxjl Table size Table size: 1,500 x 660 mm Traverse paths Travel X: 1,300 mm Travel Y: 710 mm Travel Z: 710 mm Machine weight Machine weight: approx. 8,100 kg EQUIPMENT Increased drive power 15/18 kW Chip conveyor with chip cart, ejection height 1,250 mm "Wash down" chip flushing system 32-slot tool changer Spindle oil cooling HBO-250 Internal cooling with 20 bar high-pressure pump Hydraulics for clamping device Oil mist separator (see picture)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 60,240 h, Functionality: fully functional, turning length: 1,000 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 88 mm, travel distance X-axis: 340 mm, travel distance Y-axis: 70 mm, TECHNICAL DETAILS Control unit: Fusion 640 MT Turning diameter: 610 mm Turning length: 1,000 mm Spindle bore diameter: 88 mm Spindle speed: 0-3,500 1/min Spindle drive: 32 kW Face travel (X): 340 mm Y-travel: ±70 mm Longitudinal travel (Z): 1,000 mm Minimum indexing of the main spindle (C-axis): 0.001° Tool data Tool positions: 40 Spindle speed driven tools: 4,000 1/min Spindle motor driven tools: 4 kW Tool type: KM 63 MACHINE DETAILS Required floor space: 4 x 2.4 x 2.2 m Weight: 9.6 tons Operating hours spindle 1: 60,240 h Spindle 2 operating hours: 2,791 h Dkjbevi H E Ts Hmhdxol EQUIPMENT - Chip conveyor - Jaw chuck with 315 mm diameter - Tailstock

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, roll diameter: 500 mm, belt width: 62 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Conveyor technology from the manufacturer Overbeck & Baving: a total of 400 m roller conveyor and 100 m belt or ascending conveyor are available. The height of all system stands can be variably adjusted. The entire system has always been under maintenance contract and is therefore in very good condition. All documents from the manufacturers for the system are available. All controls and sensors are available. The bidding obliges to binding collection in the period: 09.09.24 - 13.09.24 between 8 - 16 o'clock. TECHNICAL DETAILS Inside track dimension: 82 cm Outer track dimension: 92 cm Roller diameter: 500 mm Height: 80 cm Belt width: 62 cm Belt conveyor track width: 72 cm Number of 90° curves: 10 pieces Number of 45° curves: 2 pieces Conveyor belt element length: mostly 1.9 - 2.9 m Operating voltage: 3/PEN, 50 Hz, 400/230 V ± 5 % Deboucuvbo Hmhdxjkl Control voltages: 24 V DC Shipping possible throughout Europe for an additional charge.

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece height (max.): 40 mm, working width: 200 mm, working length: 3,200 mm, TECHNICAL DETAILS Machinable length: 200 - 3,200 mm Machinable width: 40 - 200 mm Workpiece height: max. 130 mm Depth with maximum mortise Ø 320 mm: 105 mm Tenoning carriage speed: 0 - 100 m/min Profiling speed: 3 - 15 m/min Tenoning 1st cross-cut saw: Power: 5.5 HP (4 kW) Saw Ø: 400 mm 2nd tenon cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available 3rd tenoning cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available Vertical positioning: With continuous axis 4th digital angle adjustment bracket: Available 5. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Double direction of rotation: Available Positioning: Vertical and horizontal with continuous axis Intervention (calibration): Time-delayed against vibrations 6. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Positioning: Vertical and horizontal with continuous axis 7. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Positioning: Vertical and horizontal with continuous axis 8th restoration group Positioning: Vertical and horizontal with continuous axis Device: For pulling out the lock 9. lower horizontal shaft (groove) Positioning: Vertical and horizontal with continuous axis Power: 88.5 HP (66.4 kW) Dkeb Hmhdovit E Hexel 10. digital guidance: available 11. return of the parts: To the operator

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 280 kg, TECHNICAL DETAILS X-axis: 400 mm Y-axis: 500 mm Z-axis: 350 mm Workpiece weight: max. 280 kg Table data size: 855 x 680 mm Control software: U-Soft Solid ultra Dsb Hjvw Skwomhdxskl Control: Dr. Schneider MACHINE DETAILS Total weight: 400 kg Dimensions (L x D x H): 1,100 x 1,100 x 2,000 mm

Condition: refurbished (used), Year of construction: 1990, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 2,000 mm, spindle diameter: 110 mm, spindle speed (max.): 1,120 rpm, drilling depth: 800 mm, Retrofit took place in 2001 TECHNICAL DETAILS Control: Heidenhain control TNC 310 X-travel: 2,000 mm Y-travel: 1,600 mm Z-travel: 2,000 mm Drilling depth: 800 mm Table height: 1,050 mm Spindle diameter: 110 mm Dsb Hmovwmc Uehdxskl Spindle mount: ISO 50 Table dimensions (LxW): 1,400 x 16.00 mm Faceplate speed: 5.6 - 224 rpm Spindle speed: 5.6 - 1,120 rpm Metric thread feeds: 1.25 - 56 mm Drive power - spindle motor: 40 kW MACHINE DETAILS Machine weight: approx. 25 t Machine length: 6,950 mm Machine width: 4,685 mm Machine height: 3,885 mm EQUIPMENT - Facing slide - 13 inch thread feeds 1 1/8 - 28 Gg/1“

Condition: good (used), Year of construction: 1998, operating hours: 16,455 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, Application by CW02/25 at the latest - submission of bids obligates timely application. Dkeb Hmeu Ni Ibehdxjl TECHNICAL DETAILS Operating hours: 16,454.39 h Control system: SINUMERIK 840D Drives: SIMODRIVE 611D Working range X-axis travel: 3,000 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Spindle Spindle holder: HSK 63 Spindle speed: max. 16,000 1/min Tool magazine Number of tool positions: 90 Internal cooling Coolant pressure: 40 bar Transportation Transport weight: 22,000 kg The machine has an oil mist separator. The machine comes with a new X-axis spindle with ball nut, newly manufactured in 2024 for €20,000

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rotational speed (max.): 12,000 rpm, The main spindle was replaced in 2022! Dkeb Hsukhlyemhdxjl TECHNICAL DETAILS x-travel: 550 mm y-travel: 400 mm z-path: 425 mm Control: Siemens SINUMERIK 840D Spindle speeds: 12,000 rpm Table size (2x): 660 x 400 mm Spindle diameter: 70 mm Tool holder: HSK 63 Tool changer: 20-fold Feed rates: 1- 60,000 mm/min Rapid feeds: 60,000 mm/min Spindle motor: 14 kW MACHINE DETAILS electr. version - voltage/frequency: 400 / 50 V/Hz Connected load: 32 kVA Machine weight: approx. 7.4 t Space requirement: approx. 4.5 x 2.3 x 2.5 m EQUIPMENT - 20-position tool changer and two work tables in alternation

Year of construction: 2006, Condition: good (used), Functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS pressure: 160 t folding length: 4100 mm column width: 3100 mm Control: DELEM DA66W table width: 120 mm Stroke: max. 800 mm Speed downwards: 80 mm/sec Speed upwards: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS oil capacity: 185 l total power requirement: 24 kW Dksbjlp Iq Ro Hmhdxsl machine weight: approx. 13 t space requirement: approx. 4.8 x 2.2 x 2.2 m

Year of construction: 2005, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 70161, TECHNICAL DETAILS turning diameter: 760 mm turning length: 864 mm turning diameter over bed slide: 450 mm longitudinal travel: 864 mm cross slide travel: 287 mm Dkjb Hmheizwwmsdxjl spindle speed (infinitely variable): 0 - 3,400 rpm spindle bore: 105 mm MACHINE DETAILS operating voltage: 400 V Connected load: 28 kVA Space requirement approx. 3.2 x 2 x 2 m EQUIPMENT - 12-fold turret - power chuck - large spindle bore - tool presetting

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun Djb Hmhovw Sdqodxskl - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: good (used), Year of construction: 2018, Functionality: fully functional, working height: 1,115 mm, workpiece weight (max.): 400 kg, worktable width: 1,200 mm, worktable length: 750 mm, Set of 5 assembly tables! New price is €160,000 No reserve price - guaranteed sale at the highest bid! Dkob Hmhdevwcidsxol TECHNICAL DETAILS per table Dimensions (WxDxH): 1,200 x 750 x 2,478 mm Working height: 815 - 1,115 mm Material: aluminum profiles Flexible feet: 4 pieces Fixation: 4 aluminum plates for fixing the assistance system in height and depth Worktop: 1 melamine-coated chipboard with PVC edge banding, 1,200 x 600 x 25 mm, attached to mounting brackets Lifting columns: electrically height-adjustable Load: max. 400 kg Lift: 300 mm Control: incl. hand switch and control EQUIPMENT per table - Ulixes Assistant A600 work assistance system - Ulixes Assistant A500 work assistance system

Condition: good (used), Year of construction: 2000, Functionality: fully functional, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, rotational speed (max.): 16,000 rpm, coolant supply: 40 bar, Application by CW02/25 at the latest - submission of bids obligates timely application. TECHNICAL DETAILS Model: HS500 Year of construction: 2000 Working area Number of working areas: 2 X-axis travel: 500 mm each Y-axis travel: 500 mm each Z-axis travel: 500 mm each Spindle Spindle holder: HSK 63 Spindle speed: max. 16,000 1/min Tool magazine Number of tool magazines: 3 Tool slots per magazine: 90 Total number of tool positions: 270 Djb Hmhdou Ni Hkjxokl Internal cooling Coolant pressure: 40 bar EQUIPMENT 7-fold pallet changer Radio measuring probe Oil mist separator Extended tool breakage monitoring (load cell) Control system: SINUMERIK 840D

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,161 h, Functionality: fully functional, travel distance X-axis: 1,625 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, table width: 1,680 mm, table length: 890 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-travel: 1,625 mm Y-travel: 860 mm Z-travel: 760 mm Table size: 1,680 x 890 mm Control system: Hurco Ultimax Spindle Dob Hjvahtgomhdxjkl Spindle diameter: 80 mm Tool holder: SK40 Spindle speed (infinitely variable): 80 - 10,000 rpm Spindle motor power: 15 kW Number of positions in the tool changer: 40 Feed rates and rapid feeds Feed rates: 1 - 18,000 mm/min Rapid traverse: 18,000 mm/min MACHINE DETAILS Connected load: 33 kVA Machine weight: approx. 14 t Space requirement: approx. 6 x 4 x 3 m Spindle hours: 21,161 h

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,821 h, Functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 1,500 mm, table length: 660 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, With horizontal axis of rotation TECHNICAL DETAILS X-travel: 1,270 mm Y-travel: 660 mm Z-travel: 610 mm Table size: 1,500 x 660 mm Control system: Hurco Ultimax Additional axis: Horizontal rotary axis Spindle Spindle diameter: 80 mm Tool holder: SK40 Spindle speed (infinitely variable): 10 - 10,000 rpm Spindle motor power: 15 kW Number of positions in the tool changer: 24 Feed rates and rapid feeds Feed rates: 1 - 30,000 mm/min Rapid traverse: 30,000 mm/min Dksb Hmhjvag Snsdxel MACHINE DETAILS Connected load: 30 kVA Machine weight: approx. 10 t Space requirement: approx. 5 x 3 x 3 m

Condition: good (used), Year of construction: 2001, Functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 1.943 bar, overall weight: 12,400 kg, pressure: 1.943 bar, TECHNICAL DETAILS Closing side Drive type: fully hydraulic Closing type: fully hydraulic Construction: four-bar Closing force: 2,700 kN Panel size (h x v): 900 mm x 1,000 mm Beam dimensions (h x v): 630 mm x 630 mm Installation height: 250 mm / 620 mm Opening travel: 550 mm Panel distance: 1,270 mm Ejector stroke: 160 mm Ejector force: 67 Nm Centering D movable plate: 160 mm Centering D fixed platen: 160 mm Threaded hole for clamping plates: M20 Dimensions (LxWxH): 6,400 mm x 2,010 mm x 2,300 mm Djbou R Nage Hmhdxjkl Total weight: 12,400 kg Injection side Screw diameter: 55 mm Stroke volume: 522 cm³ Injection pressure: 1,943 bar L/D ratio: 20 Screw stroke: 220 mm Screw speed: 285 1/min Screw torque: 1,620 Nm Plasticizing flow: 49 g/s PS Injection flow into the atmosphere: 262 cm³/s Number of heating zones: 4 Nozzle delivery force: 106 kN Pump drive power: 45 kW Voltage: 400 V / 50 Hz Oil tank capacity: 630 l EQUIPMENT On-screen text in German CEE socket 16A Hydraulic core pull 4x Machine without material hopper Leveling elements Interface for material conveyor Schuko socket 16A Two-component injection molding machine

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 4,710 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 3,000 kg Load center: 500 mm Length: 2,665 mm Width: 1,290 mm Weight: 4,400 kg Lift mast Mast type: Triplex Lifting height: max. 4,710 mm Overall height: max. 2,160 mm Free lift: max. 940 mm Fork carrier: FEM2A Fork length: 1,200 mm Fork dimensions: 45 x 122 x 1,200 mm MACHINE DETAILS Front: Superelastic 28x9-15-14PR Rear: Superelastic 6.50-10-10PR Drive type: LPG Engine: Hyundai G424IE Gearbox: Automatic/converter Dksb Hovmn Nzomhdxsl Operating hours: 0 EQUIPMENT - Side shift: fork carriage 1,130 mm, side stroke: +/- 100 mm - Strobe light - Rear grab handle with horn button

Condition: reconditioned (used), Year of construction: 2007, operating hours: 23,000 h, Functionality: fully functional, laser power: 4,000 W, laser hours: 48,382 h, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, The machine is in very good condition General overhaul was carried out 3 months before dismantling: mirrors, electrodes, vacuum pump TECHNICAL DETAILS Control: LC20BP2 Deflection type (X-/Y-axis): Flying optics Travel path (X): 3,100 mm Travel path (Y): 1,550 mm Vertical movement (Z): 120 mm Speed & precision Cutting speed: 0 - 30 m/min Travel speed X-/Y-axis: 85 m/min Travel speed Z-axis: 25 m/min Position tolerance X-/Y-axis: 0.005 mm / 500 mm Position tolerance Z-axis: 0.1 mm / 100 mm Workpiece capacity Workpiece dimensions (L x W x H): 3,150 x 1,525 x 19 mm Weight approval: 690 kg Cutting capacity steel: up to 20 mm Cutting capacity stainless steel: 15 mm (Oxygen Cut), 12 mm (Clean Cut) Cutting capacity aluminum: up to 12 mm Dob Hsvzqfzjmhdxekl Pallet changer Number of pallets: 2 Pallet change time: approx. 25 s Laser Manufacturer: Mitsubishi Model: ML40CFX Rated power: 4 kW Maximum power: 5 kW Stability: ± 1 % Frequency range: 10 - 3,000 Hz Laser type: CO₂ laser Operating hours (discharge): 23,000 h MACHINE DETAILS Laser cutting system (L x W x H): 6,670 x 3,260 x 2,100 mm Pallet changer (L x W x H): 3,430 x 2,310 x 850 mm Weight of laser cutting machine: 9,900 kg Weight of pallet changer: 1,800 kg Power consumption (machine + resonator): 71 kVA

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, edge thickness (max.): 5 mm, product height (max.): 60 mm, product height (min.): 8 mm, product length (min.): 140 mm, product width (min.): 70 mm, TECHNICAL DETAILS Control panel: LCD display with keypad Edge thickness: 0.4 - 5 mm Workpiece height: 8 - 60 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Milling and processing units Joining unit: With 2 counter-rotating diamond cutters Edge feed: For roll and strip material Glue application: With glue roller and glue unit Pre-cutting: From the roll Printing unit: Available Cutting unit: With pulling cut Flush and radius milling unit: Available Corner rounding unit: For front edges Unit adjustment: Manual Radius scraper unit: Available Surface scraper: Available Dkeb Hmevzygbjhdxol Polishing unit: Available Feed & extraction Feed speed: 11 m/min Extraction connection: 120 mm + 2 x 80 mm MACHINE DETAILS Length x width x height: 4,550 x 1,550 x 1,100 mm Weight: approx. 990 kg EQUIPMENT - Joining unit with 2 counter-rotating diamond cutters - Edge feed for roll and strip material - Glue roller and glue unit - Pre-cutting from the roll - Printing unit - Cutting unit with pulling cutting cut - Flush and radius milling unit - Corner rounding unit for front edges - Manual unit adjustment - Radius scraper unit - Surface scraper - Polishing unit - Extendable workpiece support