Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, sheet thickness (max.): 6 mm, total width: 31,900 mm, TECHNICAL DETAILS Sheet width: 3,190 mm Sheet thickness: 6.3 mm Stand width: 3,200 mm Deb Hlkjt Ahl Rjz Rjut Stop depth: 5 - 1,000 mm Stroke rate: 30 - 50 1/min Cutting angle: 1.2° Control system: RAS System 2005 Space requirement: approx. 3.83 x 3.82 m EQUIPMENT - Small parts diverter - Automatic cutting gap adjustment - Scrap separation - Return-to-sender - Cutting technology: oscillating cut - Documentation

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Heidenhain iTNC 426 Dob Hlkzeurudre Rsut X-axis travel: 1,200 mm Y-axis travel: 620 mm Z-axis travel: 600 mm Tool holder: SK 40 Tool magazine: 30-fold EQUIPMENT - High-pressure filter system with IKZ - Chip tray - handwheel - run in oil only - Machine hood Can be picked up with normal semi-trailer

Condition: excellent (used), Year of construction: 2018, operating hours: 15,569 h, Functionality: fully functional, drill diameter: 11 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 DSL / 27-300 / Sinamics, slide length: 400 mm, Bidders are obliged to collect the machine by the deadline at the beginning of August. The machine can be shipped within Germany. Shipping price on request! Operating hours: 13,237 h (as of 25.07.2023) TECHNICAL DETAILS Possible cycle time: 6 s Station 1: Loading Station 2: Alignment and clamping Station 3: Drilling unit SP125/45 Station 3 Drilling diameter: 10.8 mm Tool holder: HSK 50 (IKZ) Carriage width / length: 250 / 400 mm Stroke: 250 mm Station 4: Milling unit SP 63/20 Station 4 face milling diameter: 3.18 mm (2x in succession) Tool holder: HSK 32 Z-stroke - slide dimension / stroke: 320 x 630 mm / 250 mm Y-stroke - slide dimension / stroke: 320 x 400 mm / 120 mm X-stroke - slide dimension / stroke: 580 x 360 mm / 120 mm Station 5: Turning unit SP 200/70 Station 5 Grooving diameter: 12.9 mm (IKZ) Slide dimension: 250 x 400 mm Stroke: 250 mm Station 6: Drilling unit SP 125/45 Station 6 Drilling diameter: 6.35 and 11.1 mm Tool holder: HSK50 (IKZ) Dusb Hjum T Ewelkz Ret Carriage dimensions: 250 x 400 mm Stroke: 250 mm Station 7: Drilling unit SP 125/45 Station 7 Countersink diameter: 11.15 mm Tool holder: HSK50 (IKZ) Slide dimensions: 464 x 800 mm Stroke: 400 mm Station 8: Unloading Control: Siemens Sinumerik 840 DSL / 27-300 / Sinamics Positioning rotary indexing table: Hirth face gearing EQUIPMENT Coolant supply 25 bar (paper band filter) Chip conveyor Loading and unloading belts Extensive documentation

Year of construction: 2018, Condition: like new (used), Functionality: fully functional, little used round cycle plant with 8 stations TECHNICAL DETAILS diameter machine bed: approx. 5000 mm weight: approx. 42 t Machine color: RAL 7035 light gray / base RAL 7016 anthracite Documentation: according to SEMA standard in German incl. CE marking on CD Hinged belt conveyor / cutter pump: built into base frame with hopper Lifting pump: 550 l/ min make KNOLL Coolant: 2500 I, 500 l/min (4 bar) EQUIPMENT - complete machine base frame - rotary table RTT 1200 NC controlled - rotary feed-through for the hydraulic supply - 8 x triple clamping devices externally mounted: 2 hydraulic three-jaw chucks each with integrated cylinder (clamping force: 40 kN/ 40 bar) - coolant tank system with pump for flushing - 14 lubrication points, piping and valves (lubricant: emulsion) - paper belt filter make KNOLL STATIONS Station 1: Feeding and unloading by robot - The part is clamped on the shaft. Station 2: Turning of the head contour (2-fold) - NC- feed slide SL 45-NC z-direction - 2 x facing unit SEMA PDE (without tools) spindle distance: 300 mm - 2 x facing head LAT-160-2-32 Station 3: Turning station via handling gripper (2-fold) - Part is now clamped at the machined head Station 4: Thread rolling (2-fold) - part is clamped at the head and supported in the hexagon - NC- feed slide SL 45-NC z-direction - 2 x spindle unit SEMA SE 100 (without rolling head and rollers) - 2 x torque support by hexagon socket - counterpart is inserted, turned to stop and disconnected Station 5: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 6: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 7: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) Dusb Hlkzjnfvymo Rst - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 8: Thread deburring with deburring ring - 2 x spindle unit SEMA SE 55 (without tools) - NC- feed slide SL -NC z-direction - complete pneumatics make FESTO incl. piping - complete hydraulics make BOSCH/Rexroth or Parker incl. piping - central lubrication system make SKF incl. piping - swivel control panel with control panel front OP010C/PCU50 and keyboard - Control panel with control make SIEMENS 840 D-S7/ 24 NC axes - NC program for one workpiece - Complete cover with sliding doors (partially transparent) - pedestal

Condition: good (used), Year of construction: 2021, operating hours: 1,176 h, Functionality: fully functional, machine/vehicle number: 00583/0421/226923, High precision, compact, rigid, high performance, with direct drive, for production Machine already professionally dismantled and no longer under power. TECHNICAL DETAILS - (according to manufacturer's brochure) Spindle orientation: vertical Structure: with mobile table, columns Number of tools: 40 tools Area of application: for cutting X-stroke: 820 mm Y-stroke: 510 mm Z-stroke: 510 mm Rotation speed: 10,000 rpm Power: 14.3 kW Advance speed X-axis: 24,000 mm/min Y-axis advance speed: 24,000 mm/min Advance speed Z-axis: 24,000 mm/min Maximum table load: 500 kg Tool weight (max.): 7 kg Positioning accuracy: 0.01 mm Repeatability: 0.003 mm MACHINE DETAILS Total weight: 5,800 kg Total width: 4,390 mm Total height: 2,900 mm Operating hours: 1176 h (as of November/December) EQUIPMENT Djb Hletx Uvcskz Rjut Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,549 h, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, laser power: 3,200 W, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function Djb Hlkzsvzrb Ds Rsut - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, injection pressure: 2.387 bar, overall weight: 15,000 kg, TECHNICAL DETAILS Closing side Drive type: fully electric Closing type: Fully hydraulic Construction: four-bar Closing force: 2,500 kN Panel size (h x v): 995 mm x 1,050 mm Beam dimensions (h x v): 630 mm x 630 mm Installation height: min. 330 mm, max. 0 mm Opening travel: 820 mm Plate distance: max. 1,150 mm Rotary table size D: 0 mm Ejector stroke: 200 mm Ejector force: 58 kN Centering D moving platen: 160 mm Centering D fixed platen: 160 mm Threaded hole for clamping platens: M20 Mold weight: 3,430 kg Dimensions (LxWxH): 6.50 m x 2.20 m x 2.30 m Total weight: 15,000 kg Spray side Screw diameter: 55 mm Stroke volume: 570 cm³ Injection pressure: 2,387 bar L/D ratio: 22 Screw geometry: 9 L/D Screw diameter: 55 mm Screw speed: 260 1/min Screw torque: 82.4 Nm Plasticizing flow: 49 g/s PS Injection flow into the atmosphere: 126 cm³/s Number of heating zones: 6 Nozzle contact force: 60 kN Nozzle travel: 82.4 mm Pump drive power: 45 kW Heating power: 23 kW Voltage: 400 V / 50 Hz Oil tank capacity: 720 l EQUIPMENT 2x temperature control point for hot runner On-screen text in German CEE socket 16A Pressure accumulator for increased injection performance Ejector or core pull parallel Core pull hydraulic 1x Air valve 4x Machine with material straightener Dueb Hlkzju R Nuwe Rot Machine with water battery Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Low-wear plasticizing unit

Condition: ready for operation (used), Year of construction: 2001, operating hours: 50,162 h, Functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control Heidenhain TNC 430 x-travel: 600 mm y-path: 700 mm z-path: 600 mm NC swivel rotary table: 630x500 with pallet carrier Pallet changing device: 2-fold Pallet size: 2 x 630 x 500 mm Tool changing device: 60 places MACHINE DETAILS Switch-on time: 99,556 h Spindle hours: 55,162 h EQUIPMENT Dsb Hsuhyycjlkz Rjut - Coolant system - Cooling: IKZ - Rotary pallet changer - Chip conveyor - Measuring probe - 2 vices - 2 interchangeable pallets

Condition: excellent (used), Year of construction: 2021, operating hours: 505 h, Functionality: fully functional, machine/vehicle number: DW126K - 42, The multitool - breaking, crushing, feeding, dosing, cutting, bag opening, dissolving HIGHLIGHTS - Universal single-shaft shredder for smaller volume flows and special batches - Flexibly adaptable and unrivaled versatility - BROADEST APPLICATION SPECTRUM IN ITS CLASS Dueb Hlovgwbyjkz Rjt - Hydraulic direct drive for on-demand performance and interference-resistant operation - Economical and ecological diesel engine - Robust, durable components - Low operating costs - The entire shredding system can be changed directly on site in just 45 minutes - Bolt-on tools for quick tool replacement using the patented Dopp-Lock® system - HydraulicDirect Drive for demand-oriented performance and highly interference-resistant operation - smart handling throughout - impressive simplicity in design, maintenance and operation TECHNICAL DETAILS Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 hp) Emission standard: Stage V Tank capacity: 300 l Roller Diameter: 600 mm (L) Speed: 33 rpm Number of teeth: 8 Feed hopper Loading height: 3,124 mm Rear conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: Adjustable from 1 m/s to 4 m/s MACHINE DETAILS Total weight: 16,300 kg Chassis: crawler chassis, 2 speeds, 400mm 3-web Working position Length: 11,293 mm Width: 2,545 mm Height: 4,184 mm Transport dimensions Length: 7,820 mm Width: 2,545 mm Height: 3,231 mm EQUIPMENT - Electro-hydraulic pump, for operation when the engine is at a standstill - Auxiliary hydraulics 70 l/min - Size L shredding package - Overbelt magnet - Large radio remote control - Maintenance-friendly engine compartment with LED light - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange - Quick roller change system on the roller - Quick-change roller system on the machine

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, injection pressure: 1.441 bar, TECHNICAL DETAILS Dueb Hlkzou R Npuj Rot Closing side Drive type: fully hydraulic Closing type: Fully hydraulic Construction: tie-bar-less Closing force: 3,500 kN Panel size (h x v): 1,050 mm x 980 mm Tie bar dimension (h x v): 0 mm x 0 mm Installation height: 350 mm / 0 mm Opening travel: 950 mm Plate spacing: 1,300 mm Rotary table size D: - Ejector stroke: 250 mm Ejector force: 83 kN Mold weight: 2,500 kg Dimensions (LxWxH): 7.98 m x 2.22 m x 2.57 m Total weight: 30,750 kg Injection side Screw diameter: 70 mm Stroke volume: 1,039 cm³ Injection pressure: 1,441 bar L/D ratio: 20 Screw geometry: 9 Screw stroke: 270 mm Screw speed: 226 1/min Injection flow into the atmosphere: 386 cm³/s Number of heating zones: 5 Pump drive power: 45 kW Heating output: 29 kW EQUIPMENT On-screen text in German Machine including conveyor belt Machine including handling Machine including protective housing Machine without material leveler Leveling elements

Year of construction: 2019, Condition: good (used), Functionality: fully functional, OFC 09 Clad Degassing System, Dual, Weight in kg: 5,400; Attention. NH bearing - seaworthy packed Dsbjvwlhps Hlkz Rjut

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, pressing force: 170 t, working length: 4,050 mm, stroke distance: 215 mm, TECHNICAL DETAILS Pressure: 170 t folding length: 4,050 mm Stroke: 215 mm Control: Delem Dsb Hsvzragolkz Reut MACHINE DETAILS Machine weight: approx. 16,500 k

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, injection pressure: 1.904 bar, overall weight: 10,900 kg, pressure: 1.904 bar, TECHNICAL DETAILS Operating hours Operating hours: 9,585 h Closing side Drive type: Hybrid Closing type: Toggle lever Construction: four-bar Closing force: 1,600 kN Panel size (h x v): 710 mm x 660 mm Rail dimensions (h x v): 520 mm x 470 mm Installation height: 200 mm / 600 mm Opening stroke: 1,050 mm Ejector stroke: 150 mm Ejector force: 33 Nm Centering D movable plate: 120 mm Centering D fixed plate: 120 mm Dimensions (LxWxH): 6,700 mm x 1,600 mm x 2,300 mm Total weight: 10,900 kg Injection side Screw diameter: 55 mm Stroke volume: 523 cm³ Injection pressure: 1,904 bar L/D ratio: 18 Screw geometry: 9 Screw speed: 243 1/min Screw torque: 827 Nm Plasticizing system: 43 g/s PS Injection flow into the atmosphere: 297 cm³/s Number of heating zones: 6 Nozzle delivery force: 50 kN Voltage: 400 V / 50 Hz EQUIPMENT On-screen text in German CEE socket outlet 16A Deb Hou R I N Tslkz Reut CEE socket 32A Pressure accumulator for increased injection capacity 3 freely programmable inputs and outputs each Core pull pneumatic 2x Machine with water battery Machine without material hopper Leveling elements Interface for deaerator Interface for temperature control unit USB interface Schuko socket 10A Low-wear plasticizing unit mold heating 24x

Condition: ready for operation (used), Year of construction: 2018, operating hours: 12,246 h, Functionality: fully functional, turning length: 400 mm, turning diameter: 460 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Control system: Fanuc 32 iTB Turning length: 400 mm Turning diameter: 460 mm Swing diameter over slide: 460 mm Tool holder: direct Tool turret size: 12 positions Switch-on time: 12,246 h (counter reading) EQUIPMENT - Rear chip conveyor with double chain - Electronic handwheel - High-pressure coolant pump (6 bar 55 l/min) - High-pressure coolant pump (15 bar 55l/min) - 3-jaw power chuck in main spindle Dueb Hlsuf T Hkjkz Rjt - Hydraulic hollow clamping cylinder - Special gantry housing - GL6 - 2 axis CNC gantry loader with a capacity of 2 x 3 kg (travel to the right side) - Electric 2x180° triple swivel gripper - Workstocker WS-280 x 400 x 14 - 14 individual pallets with 13 auto-centering holding bars each Can be collected with a normal semi-trailer

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,300 h, Functionality: fully functional, machine/vehicle number: W09268227L2D380007, Mobile shredding plant as a semi-trailer chassis HIGHLIGHTS - SMART HOPPER - Extended feed range and automatic adjustment of the material feed to the performance of the shredding system. - VARIODIRECT DRIVE - The newly developed and patented VarioDirect Drive ensures stepless and variable power transmission directly to the shredding drum. - MULTI TOOL CONCEPT - Use of the shredding tools with the Dopp-Lock® system from the other slow-speed machines in sizes M and L, including the new limiter generation. - INNOVATIVE HOUSING CONCEPT - All doors open upwards for optimum accessibility. The GRP doors with their large air intakes ensure optimum ventilation and also reduce noise emissions. - EASY ACCESS CONCEPT - The comb flap, which opens up to 90°, makes it much easier to access the entire shredding chamber. This increases occupational safety and availability, even after service work. TECHNICAL DETAILS Area of application: Waste wood processing, mixed construction site waste, commercial waste Main areas of application due to roller size: Green waste / waste wood / waste / roots Drive type: Diesel Roller drum length: 2,200 mm Roller diameter: 600 mm Roller speed: 2 - 28 rpm Number of teeth/comb teeth: 20 / 14 Tooth height: 174 mm Lower belt dimensions: 0.8 x 2.9 m Underbelt speed: 1.3 - 2.9 m/s Rear belt dimensions: 1.0 x 4.9 m Tail conveyor speed: 1.25 x 3.0 m/s Discharge height: 3,162 mm Loading height: 3,390 mm MACHINE DETAILS Permissible total mass: 27 t Tare weight: 18 t Transport dimensions: 7673 x 2530 x 3604 mm Maximum working dimensions: 11.5 x 2.5 x 6.6 m Track width: 2090 mm Collision protection: 2500 mm Maximum driving speed: 80 km/h Dsb Hletu Tv Uekz Rjut Engine: MTU-DM 6R1000 Daimler OM 936 Rated power: 260 kW Emission standard: EuroMot V Displacement: 7,700 cm³ Tank size: 500 l EQUIPMENT - 2-axle semi-trailer chassis unit - Neodymium overband magnet - Irrigation - Size L shredding system

Condition: good (used), Year of construction: 2003, operating hours: 47,000 h, Functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, injection pressure: 2.05 bar, overall weight: 4,410 kg, TECHNICAL DETAILS Operating hours Operating hours: 47,000 h Dobou R Igxj Hlkz Rsut Closing side Drive type: Fully hydraulic Closing type: Fully hydraulic Construction: four-bar Closing force: 1,500 kN Panel size (h x v): 650 mm x 650 mm Beam dimensions (h x v): 470 mm x 470 mm Installation height: 250 mm / 0 mm Opening path: 500 mm Plate spacing: 750 mm Rotary table size D: 0 mm Ejector stroke: 225 mm Ejector force: 66 kN Centering D moving platen: 125 mm Centering D fixed platen: 125 mm Threaded hole for clamping platens: M12 Mold weight: - Dimensions (LxWxH): 4,470 mm x 1,670 mm x 2,180 mm Total weight: 4,410 kg Injection side Screw diameter: 40 mm Stroke volume: 182 cm³ Injection pressure: 2,050 bar L/D ratio: 20 Screw geometry: 9 Screw stroke: 145 mm Number of heating zones: 4 Nozzle delivery force: 45 kN Nozzle travel: 400 mm Pump drive power: 22 kW Oil tank capacity: 250 l EQUIPMENT On-screen text in German Machine without material hopper Leveling elements

Year of construction: 2019, Condition: good (used), Functionality: fully functional, The item consists of two OFC 08 Clad Sintering System, Dual, Weight in kg: 13,330; Debjvwlg So Hlkz Rjut Attention. NH bearing - seaworthy packed, certified accordingly; properly shut down, according to the applicable protocols, professionally dismantled, ready for container transport.

Condition: good (used), Year of construction: 2004, Functionality: fully functional, back gauge: 600 mm, pressing force: 100 t, bending length: 3,000 mm, working stroke: 200 mm, Bending cell/press brake with bending robot and automatic loading and unloading TECHNICAL DETAILS Control system: AMNC II PC Pressure: 100 t Folding length: 3,000 mm Stroke: 200 mm Control system: AMNC II PC Projection: 415 mm Installation height: 500 mm Adjustment range: Back gauge: 600 mm Weight: 10 tons Dob Hlksvzraaez Reut EQUIPMENT - Automatic loading and unloading by robot - Bending robot to support the bending process

Condition: excellent (used), Year of construction: 2014, operating hours: 8,500 h, Functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 150 mm, turning diameter: 250 mm, TECHNICAL DETAILS Machine type Vertical turning machine with 2 moving turning spindles and 2 tool turrets Operating hours Operating hours: approx. 8,500 h Machine cycles: 497,000 Control system Siemens 840D Dusb Hlsu Nhc Rekz Rot Spindle Spindle nose size: A6 DIN55026 with Schunk D260 mm Max. Speed: 4,500 rpm Drive power: 12.5 kW Working range Max. Turning length: 150 mm Max. turning diameter: 250 mm Cross slide Axes: X and Z-axis Tool holder: VDI40 according to DIN69880 Number of stations per turret: 8 Workpiece feed Conveyor belt type: Rectangular table for approx. 30 flanges, diameter 200 mm, approx. 150 kg Workpiece handling: Servo-pneumatic lifting axis for feeding and returning the workpieces to the clamping device Special functions Production of identical workpieces on both spindles or of two different workpieces possible Turning device with gripper diameter 250 mm, installed between 1st and 2nd spindle Finished part storage Type: Rotary table with diameter 1,500 mm for approx. 30 flanges, diameter 200 mm, approx. 150 kg EQUIPMENT Chip conveyor with coolant tank

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rotational speed (min.): 35 rpm, rotational speed (max.): 6,000 rpm, number of slots in tool magazine: 60, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Travel distance - x: 1,000 mm Travel - y: 850 mm Dueb Hsuf Tprelkz Rjt Travel - z: 750 mm Spindle speed: 35 - 6,000 rpm Number of places in the tool changer: 60 Table dimensions - longitudinal: 630 x 630 mm Control: FANUC16i EQUIPMENT - with IKZ - chip conveyor. - NC rotary table 360,000 x 0.001°

Condition: ready for operation (used), Year of construction: 2004, operating hours: 14,354 h, Functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,170 mm, number of slots in tool magazine: 84, swivel angle B-axis (max.): 210 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Swing diameter over bed: 550 mm Swing diameter over cross slide: 530 mm Control system: OKUMA OSP-U100L Travel distance - x1: 475 mm Travel distance - x2: 160 mm Travel path - z1: 1,170 mm Travel distance - z2: 1,155 mm Travel path - y: 160 mm C-axis: 360° B-axis: 210° Number of positions in the tool changer: 84 Number of holders in the turret head: 12 MACHINE DETAILS Dsb Heuf Tlgjlkz Rsut Dimensions: 4,320 x 2,645 x 2,900 mm Machine weight: 12,500 kg Spindle hours: 14,354 h Switch-on time: 70,794 h EQUIPMENT - with palletizing system and robot handling

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 710 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel distance - x: 140 mm Travel - z: 710 mm Control: Siemens C 200-4 Main spindle speed: 5,000 rpm Passage diameter: 65 mm Number of slots in the tool changer: 2 x 12 slots MACHINE DETAILS Rated power: 47 kW Operating voltage: 400 V, 50 Hz Mass of cabinet: 610 kg Machine mass: 6550 kg EQUIPMENT - 2 turrets Dusb Hlkeuf Tdpsz Ret - Tailstock - Bar loader: Index MBL 65 - Passive tool holder

Year of construction: 2019, Condition: good (used), Functionality: fully functional, The item consists of two OFC 08 Clad Sintering System, Dual; Weight in kg: 13,330; Dusb Hlkzevwlfhs Ret Attention. NH bearing - seaworthy packed, certified accordingly; properly shut down, according to the applicable protocols, professionally dismantled, ready for container transport.

Year of construction: 2019, Condition: good (used), Functionality: fully functional, OFC 08 Clad Sintering System, Single, Weight in kg: 9,780 Attention. NH bearings - seaworthy packed, appropriately certified; properly decommissioned, according to applicable protocols, professionally dismantled, ready for container transport. Duob Hlevwlddskz Rst

Year of construction: 2020, Condition: good (used), Functionality: fully functional, The article consists of two OFC 05 Horizontal OVD Clad Deposition System, Dual Spindle; Weight in kg: 13,700; Attention. NH bearings - seaworthy packed, suitably certified; properly decommissioned, according to the applicable protocols, professionally dismantled, ready for container transport. Dusb Hlkjvwlbcoz Rot