Second-hand machinery for sale (2,398)

Condition: used, Year of construction: 1992, Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. Cgslq Nkqjwhpc Ro Set Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Mix ET121/101 Horizontal Mixer V: 1120L ATEX 20 (i),22 (22) Cslq Nkowf Ixlsq Segt SS304 Electrical: 380V - 50Hz Dimension: l 2700mmx w 1000mm x h 200mm Condition: Very Good

Condition: like new (used), Year of construction: 2003, Functionality: fully functional, cutting length (max.): 6,000 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 500 mm, saw blade diameter: 550 mm, pivoting range: 45 °, Brand new machine - never used! TECHNICAL DETAILS Maximum cutting length: 6,000 mm Minimum cutting length at 90°: 375 mm Minimum cutting length at 45° (inclined): 375 mm Saw blade diameter: 550 mm Saw blade speed: 2,250 rpm Inward tilt range (pneumatic): 90° - 45° Manual tilt range: up to 22.5° inward and up to 140° outward (with digital display) Inward tilt range (pneumatic): 90° - 45° Feed and connections Celqev Rf Uvo Nkq Sjgt X-axis feed length: 5,000 mm Y-axis feed length: 500 mm Input voltage: 400 V Compressed air connection: 7 bar Motor power per unit: 4 kW MACHINES DETAILS Total width: 1,350 mm Total height: 1,550 mm Total weight: 1,850 kg EQUIPMENT - 2 additional heads included (4 heads included in total) - Bottom cutting possible for precise cuts - Pivoting and tilting saw units; intermediate angle manually adjustable - Includes cutting/excess length module, protective covers, and pulsed coolant system

Condition: good (used), Year of construction: 1971, General overhaul 2021, 6 rollers, pipe diameter 5 – 45mm, straightening speed 37.5-75 m/min (3-speed manual transmission), drive power 2x 4 KW Colq Newg Hfyskq Segt

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Colq Neu R N Hyskq Sogt Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: used, Year of construction: 1996, Bridgeport VMC 760/22 Vertical Machining Centre with Heidenhain TNC 370 Control, 3 Axis, 22 Tool ATC, 1000 x 500mm Bed, Airbench Oil Mist Filter System. S/No. 21108 (1996) Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Cgslq Nkewhpbgoq Sst

Condition: used, Bauermeister TB910/101 Grinding Station UMT 3.3 max flowrate:2000kg/h air pipe (i) diam.204mm, air pipe (o):204mm Cgjlqjwf Ivdo Nkq Sst filter DCE, Elektror fan SS304L total h.:2029, l.2240,w.1190 Condition: Very Good

Condition: good (used), Year of construction: 2009, 3 ZF 180, switch and control cabinets Cslq Nkqewg Hd Ae Sogt

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm Colq Nkqeu Egags Sogt - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Celq Nkqewhpaie Sjgt

Condition: used, Arodo Total Bag Handling Bag Filling Machine Bag input bag filling bag closing serial 060892, bag cap. Max 50 kg, pressure 6-9 bar, 400 vol Actemum ADS Tec touch screen control Outfeed powered conveyor Outfeed powered belt conveyor Cslq Njwd Sgwskq Sogt

Condition: good (used), Year of construction: 1975, Pressure max. 50t, press control with display Siemens Simatic HMI, safety device Sick Cgslswg Hdcoq Nkq Sot

Condition: good (used), Year of construction: 2016, Hosokawa Mikron dual-chamber unloading glove box/isolator, fully refurbished in 2016 by Concept Containment Designs, 316 stainless steel, ATEX compliant. Includes CO.RA dosing valve, exhaust fan, and Mettler-Toledo scale. Alloy: 316 stainless steel Colq Nev Rxaxjkq Sogt

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Cgslq Njwhn Uxjkq Sjt Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, 5x Van Aarsen PM4000 Stainless Steel Multi Mix Single Shaft Paddle Mixers Colqswd Sgke Nkq Ssgt Volume 4000 litre, with electro motor, 400 volt, 75 kW, with in and output, for minerals

Condition: good (used), Year of construction: 2011, Serial No. A11006-01, max. press force 75 t, stroke rate 50-150 strokes/min., throat 330 mm, ram adjustment 80 mm, stroke 120 mm, connected load 16 kW, hydraulic clamping station, Roemheld Cjljwg Hcrjq Nkq Sogt

Condition: good (used), Year of construction: 2021, with autosampler 7693A/G4513A (model year 2020). GC is model G3540 Cgelq Nkqjv Rw Nlo Sjt

Condition: used, Year of construction: 2006, Homag Optimat KAL310/6/A3/S2 Edgebanding Machine, 6-Position Tape Cart, Quickmelt glueing unit QA3, Approx 1100mm Wide Machine Roller width conveyor, Tilting outfeed conveyor to return belt conveyor. Windows based control. Serial No. 0-200-15-4533 (2006) Colq Nkqewcyzmj Sjgt Please Note: This lot is located in Exeter, UK. Unfortunately there are no loading facilities on-site. Dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2012, Serial No. A11005-01, max. pressure 600 t, press control with display, Siemens, type Multi Panel Touch, stroke rate 15-50 strokes/min., ram adjustment 15 mm, stroke 250 mm, connected load 60 KW, weight 45.5 t, Skako feed station, continuous heating furnace, conveyor belt, workpiece automation, MSG, extraction, URS, type Smog-Hog SH 40m T3, inspection system, tech 3D, built in 2012, Serial No. 096951199, Cognex camera, Epson robot, PLC system control with Siemens Simatic Multi Panel Touch display, switch and control cabinets, operator panels, safety devices Cgolq Njwg Hbuokq Set

Condition: good (used), last calibration Aug 2024 Colsv Rw Eyjq Nkq Segt

Condition: good (used), Year of construction: 2022, Serial No. 8413, for cylindrical components (polishing, deburring) PLC control with display, Siemens, type HMI Touch, coolant system with belt filter, Stevens, type PF90, oil mist extraction, LTA, type E 120 X-1-H, 1 inventory of accessories and spare parts Colq Nkqowg Hade Segt

Condition: good (used), Year of construction: 1994, Serial No. 5-5, control, Siemens, type 3T, 2 horizontal spindles, 2 cross slides, swivel arm for workpiece loading and unloading, workpiece automation Celq Nowg E Uaekq Sogt

Condition: good (used), Year of construction: 2012, Serial No. 68180, control, Siemens, type 840D solution line, 2x3 axes (X/Z/C), 2 spindles, 2x 12-station turrets, driven tool stations, max. speed 4,000 rpm, 2x face chucks, Hydac 170S spindle cooling, workpiece automation, remote diagnostics for NC/MMC Colq Nswg E Tpjkq Sjgt

Year of construction: 2014, Condition: good (used), Serial No. 2.930, wire-link belt, throughput width 250 mm, throughput height 100 mm, spray cleaning with flat jet nozzles, multi-tank system (500 l rinse tank + 800 l wash tank), heating, Siemens PLC control with touch display, switch and control cabinets, stainless steel collecting tray Cgslq Nkqjwg E Nws Sjt

Condition: good (used), Year of construction: 2014, operating hours: 33,703 h, Serial no. 200167, control, make Siemens, type 840 Dsl (index C200-4D SL), bar capacity 40 mm, 6 work spindles, 10 slide units with X/Z NC axis, 2 synchronous spindles (swivel axis and Z axis NC controlled in positions 5.2 and 6.1), 2x three-jaw chucks Röhm KFD-HS 110, 1x boring device for three-jaw chuck, rear machining device on L 6.2, 1 set of driven tool carriers, bundle loader, make IEMCA, type SIR MS40F, model 33, year 2014, serial no. 02143 MB03, with tapping unit and minimum quantity lubrication, 6 material slides/rotary sleeves for D18 mm, 2 sets of internal clamping sleeves D18/D32 mm, drill breakage detection, coolant system, oil mist extraction, Büchel, CO2 extinguishing system, Kraft and Bauer, Operating hours: 33,703 Cslq Nkqowg E Hpo Ssgt