Compressor

Atlas Copco XAS 67 DDG

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,608 h, Atlas Copco XAS 67 DDG compressor, manufactured in 2011, with 1608 operating hours, a flow rate of 3.5 m³, emergency power output of 12.5 kVA, and connections for 1 x 230 volts and 2 x 400 volts. Serial number: YA3062565B0165591. Approval documentation is available. Tedpfozbiivjx Aa Ioc

Condition: used, Technical details: bending angle max.: 0 - 225 ° Tedpfx Aaex Adbne Ijc working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 2011, operating hours: 1,192 h, Equipment: soot filter, Compressor Atlas Copco XAS 67 DDG, built in 2011, 1192 operating hours, volume flow 3.5 m³, emergency power 12.5 kVA, connections 1 x 230 volts, 2 x 400 volts, serial number YA3062566B0165583, approval available, the fuse blows when the emergency power is switched on, downstream soot filter SMF-MR Tedpfx Ajv Rbufsa Ijc

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Tsdpfx Aexlngaoa Ioc Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: good (used), overall weight: 5,100 kg, fuel type: diesel, fuel: diesel, Year of construction: 2005, PROD - ATLASCOPCO TYPE - XAS426 S/N - YA3-062854-50542371 YEAR - 2005 POWER (kW) - 166 PUMP. (m3/min) - 25 CIS (bar) - 7 Tedjt Srw Aepfx Aa Isc

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Delivery rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW Todpfxsrzuwms Aa Iec with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2009 Condition: In good used condition.

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - throat depth 210 mm - Machine table 480 x 420 mm Tjderwmbgspfx Aa Iec - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: new, Year of construction: 2025, General information Field of application: Construction Reference number: 2 Weights Empty weight: 500 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Tsdpoq Ixunofx Aa Iec Other information Fits to following machines: 5-12ton Delivery terms: EXW Working pressure: 190-210 bar Production country: KR Additional information Please contact Ö. Inalkac for more information ASH-52H is a Mini Scrap/ Metal Shear with hydraulic rotation and double cylinder. This model is suitable for excavator 5~12 ton. ASH-52H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló ножици ψαλίδια nůžky saks tesouras foarfece Schere žirklės ножницы forbici sax

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Technical data: Tedpfx Ajrwl Nnoa Iec - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: used, Year of construction: 2003, MONTABERT DA370ME year 2003, weight kg 2100, caterpillar quick release Todpfoqwcl Hsx Aa Ijc