Precision chuck (B2)

Albrecht APC 14-S

Condition: not inspected (used), Working length max. 400 mm Working width max. 150 mm Wood thickness max. 25 mm Hydraulic motor 2,2 kW 2 milling motors à 2,2 kW Spindle speed 12.000 rpm. Frequency converter 8 kVA, 200 Hz Lodok Tyrwspfx Aa Eehr Weight ab. 1200 kg

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Lsdpfx Aogwt S Tsa Ejhr

Year of construction: 1970, condition: not inspected (used), Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Lodpfxehikdwj Aa Ejhr Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: Lodpjdt Rgvjfx Aa Ejhr VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and screen CTP systems. Inspected and tested. Lhjdpfx Aedtr A Tsa Esr

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10 Lhedpscggy Ssfx Aa Esr

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. Lhedpfxjiryyae Aa Eor TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Ledohpqquopfx Aa Eohr Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Condition: excellent (used), Year of construction: 2018, CNC controller: HEIDENHAIN TNC 640 Axes X-axis travel mm: 2.200 Y-axis travel mm: 2.200 Z-axis travel mm: 1.610 A-axis degrees: +185° Worktable Lhedjw Rmplspfx Aa Ejr Number of pallets: 4 Table dimensions mm: ø1.800x1.400 Maximum workpiece size (D x H) mm: ø2.850x2000 Max. workpiece weight kg: 4.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 63/73 (100/40%ED) Spindle torque Nm: 300/348 (100/40%ED) Cooling Cooling through the Spindle Center bar: 80 (Form A) Tank capacity: 2.500 Tool system Tool holder: HSK-100A Tool magazine slots: 304

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Lodpfjh Tm Dujx Aa Eehr Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Z-stroke: 530 mm POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.