AJCE ASG300H Atlas Scap Grapple Poliepgrijper

AJCE ASG300H Atlas Scap Grapple Poliepgrijper

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Djdoua Tbwopfx Aqvecp Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, Year of construction: 2023, functionality: fully functional, total width: 1,800 mm, total height: 2,000 mm, total length: 1,600 mm, overall weight: 3,000 kg, This is a new brand new machine available immediately. Dcedpfx Aqoukfvpjvep

Condition: used, Aluminum silo (plastic granulate silo) resting on a base ring – used – designed for a bulk density of 0.8 kg/dm³ Volume: 50,000 liters Manufacturer: EVS Available quantity: 1 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Angle of the upper base: 15° Angle of the cone: 90° Equipment and connections: In the upper base: 1 x access hatch DN 600 with hinged cover 1 x vent 1 x roof edge railing with handrail 2 x crane lugs 1 x flange for filling line Dodpfx Aqjww Em Djvocp 1 x block flange for measuring and control technology On the shell: 1 x access door approx. 870 x 1,960 mm Various pipe support brackets for the filling pipe 1 x filling pipe DN 80 1 x nozzle for level indicator Otherwise, as per the images and drawing.

Condition: used, first registration: 06/2025, fuel type: gasoline, empty load weight: 3 kg, color: grey-black, gearing type: mechanical, Year of construction: 2025, TITLE: USED ROLL-OFF CONTAINER FOR BULKY WASTE WITH HYDRAULIC LID – DRIVER’S SIDE OPENING, PASSENGER SIDE HINGES, REAR OPENING WITH TWO SWING DOORS, NEW FLOOR FITTED REF: 25-U-89 Dsdjwuwvrjpfx Aqvecp TYPE: Bulky waste NEW: No LID: Yes OPENING: Rear with two swing doors DIMENSIONS TOTAL OUTSIDE LENGTH: 5.00 m BOX OUTSIDE WIDTH: 2.50 m FRONT PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m REAR PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m SIDE PANEL INTERNAL / EXTERNAL: 2.20 m / 2.60 m CAPACITY: 25 m³ WEIGHT: 2,840 kg FLOOR: 4 mm WALL: 3 mm COLOR: green Errors and omissions excepted. Prices shown are excluding VAT. Please contact sales for an up-to-date price and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste sector. Specialized in trucks, trailers, and roll-off equipment. Over 50 trucks and more than 150 containers, roll-off bins with and without cranes, available for immediate delivery. E.&O.E. Given the number of listings and details provided Aurora recommends checking the accuracy of the information with our sales staff.

Condition: excellent (used), loading space volume: 54 m³, Year of construction: 2002, Hüffermann LL101s/Roll-off Container 54 cbm/5 UNITS AVAILABLE • Manufacturer: Hüffermann • Model: LL101s • Year of manufacture: 2002 • Unladen weight: 3,900 kg • Permissible total weight: 15,000 kg • Nominal capacity: 54 cbm • Internal dimensions: 7.4 m x 2.42 m x 2.95 m Dcjdpfswaap Ejx Aqvsp • External dimensions: 7.52 m x 2.55 m x 3.185 m • Floor: 3 mm S235 steel sheet • Sides: 3 mm S235 steel sheet • Rear side: 3 mm S235 steel sheet • Doors: twin-leaf • External colour: RAL 1226

Condition: used, x x x dismantled x Dcsdpfjip Rdlsx Aqvsp +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, New equipment MASS International Angled conveyor / flow conveyor L - Conveyor belt with a fixed angle of 35° available for short-term delivery Dcodpfx Aohm Axgeqvsp MASS International Angled conveyor NC1 Conveyor belt with a fixed angle and collection trays in the infeed section Example as shown: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height adjustable, discharge height 750 - 1050 mm Fixed angle between the infeed and inclined sections Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Optional: Other dimensions, see standard delivery list Dimensions according to customer requirements FDA-compliant belt Modified belt speed etc.

Year of construction: 2023, condition: new, Polyp Scrap Grapple for Cranes Palfinger Hiab Capacity: 300 Lt / 0.3 m3 Model: 4 Tinned - Half Closed Dcjdpfjnziblsx Aqvjp Gross Weight: 450 Kg

Condition: like new (used), Multi-stage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Dcodpfx Aefz D Dnjqvjp Product No.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Djdoy Tlzaspfx Aqvjcp