GM3s

Aerzen GM 3S GM 4S

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, We specialize in the remanufacturing of blowers, compressors, and vacuum pumps. We service equipment from manufacturers such as: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, and Tuthill. We also offer blowers and compressors for rental. We operate throughout Europe and beyond. Iodpfen Tntqsx Am Ijar

Condition: new, Year of construction: 2026, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Ijdperwwt Ssfx Am Ioar

Year of construction: 2012, condition: good (used), Medium pressure conveyor for wood chips approx. 4 tons per hour Ijdpfx Amjb Uyizj Isar conveyor pipe originally 180 m 150 mm partly existing Air capacity approx. 2.350 m³/h Motor power three-phase motor according to IEC 55 kW Protection class IP54 1 Housing made of high quality grey cast iron, equipped with two dynamically balanced dynamically balanced rotary pistons, with hardened and ground, angularly toothed precision timing gears, each mounted in roller bearings. Drives by means of V-belts, with the two pulleys and the corresponding high-performance narrow V-belts as well as a protective cover. 1 drive unit with motor tensioning rails, shaft connection with easy-to-fit Taper-Lock tensioning bushes, completely mounted on a common base support. 1 combined intake-filter-silencer (absorption silencer) 1 resonance-absorption-pressure silencer, version as base unit 1 basic unit 1 pressure valve 1 non-return damper 1 elastic connection sleeve with clamps 1 pressure gauge 1 set of vibration isolators with fixing screws 1 Electrical pressure monitoring consisting of pressure transmitter and display unit as well as electrical output signal 1 acoustic enclosure made of galvanized sheet steel with oil collecting tray and ceiling painting RAL 5001, segmental construction with inner lining and forced ventilation, fan wheel driven by fan shaft. Sound hood for outdoor installation.

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Iaedpfxexmkc Ts Am Ijr

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Isdpfjwvir Isx Am Ioar Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: used, Jaw chuck different versions Iedpfjb I Sdxex Am Ijar from 300mm to 500mm

Condition: used, Year of construction: 2015, overall weight: 4,000 kg, total length: 3,435 mm, total width: 1,750 mm, total height: 2,385 mm, power: 200 kW (271.92 HP), volume flow: 28.5 m³/h, pressure (max.): 10 bar, noise level: 81 dB, Equipment: type plate available, KAESER DSG 290-2 oil-free screw compressor Manufacturer: KAESER Model: DSG 290-2 Year of manufacture: 2015 Volume flow: 28,5 m³/h Iaedpfx Amsu Rnzij Ior Compressor motor: 5.5 kW Protection class: IP55 Mains frequency: 50 Hz The compressor was in use until recently and is in good condition. The device can be inspected on site by arrangement.

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, For sale: Aerzen Delta Hybride D98S, year 2018 Isdev Ev D Rjpfx Am Ioar 6 months warranty Excellent condition. I have 2 units available.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 270 mm, spindle bore: 77 mm, center height: 250 mm, turning length: 1,500 mm, quill stroke: 180 mm, quill diameter: 70 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 12 rpm, We are offering the following on behalf of the client: conventional lathe CONTUR SN - 500 - center distance 1500 mm with Forkhard chuck Ø 315 mm Multifix size C and digital display in 3 axes. The machine was only used for re-turning and is in very good condition. The sale is due to lack of space. Iasdpfx Amovt Ufcj Isr New price approx. 32,000 euros

Condition: excellent (used), functionality: fully functional, 3 units complete Isdsv Uvn Iopfx Am Iear DEMAG single-girder trolleys with hoist DH316 H12 Load capacity 6.3 t Rope reeving 4/1 Hoist motor KBH140 B2/12 Main lift 6.3 m/min Fine lift 1.0 m/min Hoist gearbox i=85 Trolley: Travel motor KBF80 A8/2 / Gearbox AF04 i=14.1 With DEMAG DST pendant control and main crane connection box Price is per unit; when purchasing 3 units, €3,900.00 each Good condition Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse